Instrukcja obsługi Yamaha NS-SW1000

Yamaha subwoofer NS-SW1000

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Yamaha NS-SW1000 (20 stron) w kategorii subwoofer. Ta instrukcja była pomocna dla 3 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/20
AB
Subwoofer
NS-SW1000
OWNER’S MANUAL
i En
Thank you for selecting this Yamaha product.
Please read the following operating precautions before use.
Yamaha will not be held responsible for any damage and/or
injury caused by not following the cautions below.
To assure the finest performance, please read this manual
carefully. Keep it in a safe place for future reference.
Install this unit in a cool, dry, clean place - away from
windows, heat sources, sources of excessive vibration, dust,
moisture and cold. Avoid sources of humming
(transformers, motors). To prevent fire or electrical shock,
do not expose this unit to rain or water.
The voltage to be used must be the same as that specified on
the rear panel. Using this unit with a higher voltage than
specified is dangerous and may cause a fire and/or electric
shock.
Do not use force on switches, controls or connection wires.
When moving the unit, first disconnect the power plug and
the wires connected to other equipment. Never pull the
wires themselves.
When not planning to use this unit for a long period (ie.,
vacation, etc.), disconnect the AC power plug from the wall
outlet.
To prevent lightning damage, disconnect the AC power plug
when there is an electric storm.
Since this unit has a built-in power amplifier, heat will
radiate from the rear panel. Place the unit apart from the
walls, allowing at least 20 cm of space above, behind and on
both sides of the unit to prevent fire or damage.
Furthermore, do not position with the rear panel facing
down on the floor or other surfaces.
Do not cover the rear panel of this unit with a newspaper, a
tablecloth, a curtain, etc., in order not to obstruct heat
radiation. If the temperature inside the unit rises, it may
cause fire, damage to the unit and/or personal injury.
Do not place the following objects on this unit:
- Glass, china, small metallic, etc.
If glass, etc., falls as a result of vibrations and breaks, it
may cause bodily injury.
- A burning candle etc.
If the candle falls as a result of vibration, it may cause fire
and bodily injury.
- A vessel containing water
If the vessel falls as a result of vibration and water spills,
it may cause damage to the speaker, and/or you may get an
electric shock.
Do not place this unit where foreign material, such as
dripping water. It might cause fire, damage to this unit, and/
or personal injury.
Never put a hand or a foreign object into the YST port
located on the right side of this unit. When moving this unit,
do not hold the port, as it might cause personal injury and/or
damage to this unit.
Never place a fragile object near the YST port of this unit. If
the object falls or drops as a result of the air pressure, it may
cause damage to the unit and/or personal injury.
Never open the cabinet. It might cause an electric shock,
since this unit uses a high voltage. It might also cause
personal injury and/or damage to this unit. If something
drops into the set, contact your dealer.
When using a humidifier, be sure to avoid condensation
inside this unit by allowing enough space around this unit or
avoiding excess humidification. Condensation might cause
fire, damage to this unit, and/or electric shock.
Super-bass frequencies reproduced by this unit may cause a
turntable to generate a howling sound. In such a case, move
this unit away from the turntable.
This unit may be damaged if certain sounds are
continuously output at high volume level. For example, if
20 Hz-100 Hz sine waves from a test disc, bass sounds from
electronic instruments, etc., are continuously output, or
when the stylus of a turntable touches the surface of a disc,
reduce the volume level to prevent this unit from being
damaged.
If you hear distortion (i.e., unnatural, intermittent “rapping”
or “hammering” sounds) coming from this unit, reduce the
volume level. Extremely loud playing of a movie
soundtrack’s low frequency, bass-heavy sounds or similarly
loud popular music passages can damage this speaker
system.
Vibration generated by super-bass frequencies may distort
images on a TV. In such a case, move this unit away from
the TV set.
Do not attempt to clean this unit with chemical solvents as
this might damage the finish. Use a clean, dry cloth.
Be sure to read the “TROUBLESHOOTING” section
regarding common operating errors before concluding that
the unit is faulty.
Install this unit near the wall outlet and where the AC power
plug can be reached easily.
Secure placement or installation is the owner’s
responsibility. Yamaha shall not be liable for any
accident caused by improper placement or installation
of speakers.
CAUTION: Read this before operating your unit
WARNING
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO
NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.
This unit is not disconnected from the AC power source as
long as it is connected to the wall outlet, even if this unit
itself is turned off. In this state, this unit is designed to
consume a very small quantity of power.
ii En
For U.K. customers
If the socket outlets in the home are not suitable for the plug
supplied with this appliance, it should be cut off and an
appropriate 3 pin plug fitted. For details, refer to the
instructions described below.
Note: The plug severed from the mains lead must be
destroyed, as a plug with bared flexible cord is hazardous if
engaged in a live socket outlet.
SPECIAL INSTRUCTIONS FOR U.K. MODEL
FEATURES......................................................................1
SUPPLIED ACCESSORY .............................................1
PLACEMENT .................................................................2
Subwoofer orientation.................................................2
CONTROLS AND THEIR FUNCTIONS..................... 3
CONNECTIONS .............................................................5
Connecting to line output (pin jack) terminal(s)
of the amplifier.......................................................5
Connecting to speaker output terminals
of the amplifier.......................................................6
Connecting to the INPUT1/OUTPUT terminals of the
subwoofer
....................................................................7
System connections ....................................................7
Connecting the power cable........................................8
AUTOMATIC POWER-SWITCHING FUNCTION
...........8
Setting the AUTO STANDBY switch ........................8
ADJUSTING THE BALANCE......................................9
Subwoofer frequency characteristics ........................11
ADVANCED YAMAHA ACTIVE SERVO
TECHNOLOGY II .......................................................12
Twisted Flare Port.........................................................12
TROUBLESHOOTING ...............................................13
SPECIFICATIONS .......................................................14
IMPORTANT:
THE WIRES IN MAINS LEAD ARE COLOURED IN
ACCORDANCE WITH THE FOLLOWING CODE:
Blue: NEUTRAL
Brown: LIVE
As the colours of the wires in the mains lead of this
apparatus may not correspond with the coloured
markings identifying the terminals in your plug, proceed
as follows: The wire which is coloured BLUE must be
connected to the terminal which is marked with the letter
N or coloured BLACK. The wire which is coloured
BROWN must be connected to the terminal which is
marked with the letter L or coloured RED. Make sure that
neither wire is connected to the earth terminal of a three
pin plug.
Information for Users on Collection and Disposal of Old
Equipment
This symbol on the products, packaging,
and/or accompanying documents means
that used electrical and electronic products
should not be mixed with general
household waste.
For proper treatment, recovery and
recycling of old products, please take them
to applicable collection points, in
accordance with your national legislation
and the Directives 2002/96/EC.
By disposing of these products correctly,
you will help to save valuable resources
and prevent any potential negative effects
on human health and the environment
which could otherwise arise from
inappropriate waste handling.
For more information about collection and
recycling of old products, please contact
your local municipality, your waste
disposal service or the point of sale where
you purchased the items.
[Information on Disposal in other
Countries outside the European Union]
This symbol is only valid in the European
Union. If you wish to discard these items,
please contact your local authorities or
dealer and ask for the correct method of
disposal.
Taking care of the speaker
To maintain the spotless glossy surface of the polished
finish, wipe it with a soft, dry cloth. To avoid damage to the
finish, do not apply chemical solvents, such as alcohol,
benzine, thinner, insecticide, etc. Also, do not use a damp
cloth, or any type of cloth that contains chemical solvents,
or place a plastic or vinyl sheet on top of the speaker.
Otherwise, the finish may peel, the color may fade, or the
sheet may stick to the surface.
Yamaha recommends that you use a Yamaha Unicon cloth
(sold separately). For heavy dirt, use a Yamaha Piano Unicon
(sold separately). You can purchase a Yamaha Unicon cloth
and Piano Unicon at your nearest Yamaha dealer.
CONTENTS
1
2


Specyfikacje produktu

Marka: Yamaha
Kategoria: subwoofer
Model: NS-SW1000

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Yamaha NS-SW1000, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje subwoofer Yamaha

Yamaha

Yamaha CXS18XLFW Instrukcja

10 Grudnia 2024
Yamaha

Yamaha A15W Instrukcja

10 Grudnia 2024
Yamaha

Yamaha YST-SW315PN Instrukcja

2 Października 2024
Yamaha

Yamaha R118W Instrukcja

9 Września 2024
Yamaha

Yamaha NS-SW1000 Instrukcja

5 Września 2024
Yamaha

Yamaha DXS12 mkII Instrukcja

5 Września 2024
Yamaha

Yamaha NS-SW050 Instrukcja

4 Września 2024
Yamaha

Yamaha DXS15mkII Instrukcja

2 Września 2024

Instrukcje subwoofer

Najnowsze instrukcje dla subwoofer