Instrukcja obsługi Yamaha A15W
Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Yamaha A15W (5 stron) w kategorii subwoofer. Ta instrukcja była pomocna dla 6 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek
Strona 1/5
ENGLISH
A10/A12/A15/A12M
A15W
使用说明书
Owner’s Manual
SPEAKER SYSTEM
SUBWOOFER
EN
ZH
2
Thank you for choosing this YAMAHA speaker system. In order to take maximum advantage of the speaker’s fea-
tures and ensure maximum performance and longevity, please read this manual carefully before using the speaker
system. Keep the manual in a safe place for future reference.
PRECAUTIONS
PLEASE READ CAREFULLY BEFORE PROCEEDING
* Please keep this manual in a safe place for future reference.
WARNING
Always follow the basic precautions listed below to avoid the possibility of serious injury or even death from electrical
shock, short-circuiting, damages, fire or other hazards. These precautions include, but are not limited to, the following:
• Do not open the device or attempt to disassemble the internal parts or
modify them in any way. The device contains no user-serviceable parts.
If it should appear to be malfunctioning, discontinue use immediately
and have it inspected by qualified Yamaha service personnel.
• Do not expose the device to rain, use it near water or in damp or wet
conditions, or place containers on it containing liquids which might
spill into any openings.
CAUTION
Always follow the basic precautions listed below to avoid the possibility of physical injury to you or others, or damage
to the device or other property. These precautions include, but are not limited to, the following:
• If you use a stand, make sure to observe the following precautions in
order to avoid toppling the device or causing damage to the internal
components.
- Check the stand’s specifications and make sure that it is sturdy enough to
support the weight of the speaker.
- Mount only one speaker on each speaker stand.
- Use the supplied screws if included.
- Tighten fastening screws securely.
- Use the speaker stands with their legs fully opened.
- Use the stand at a height of less than 140cm (55").
- Add weight such as sand bags around the stand legs to prevent them from
falling over.
- Remove the speakers from the stands before moving the stands or adjusting
their height.
- Limit the number of people around the placed stand.
We recommend using the TS-80 and TS-90 speaker stands
manufactured by Ultimate Support Systems, Inc. (sold separately) to
support the speakers.
• If you use the metal socket on the subwoofer for mounting of a satellite
speaker, use a pole no longer than 90cm (35.4") with an outer diameter
of 35mm (1-3/8"). Use of any other size pole may cause the device to
fall, and result in injury or damage to the internal components.
• When transporting or moving the device, always use two or more
people. Attempting to lift the device by yourself may damage your back,
result in other injury, or cause damage to the device itself.
• Before moving the device, remove all connected cables.
• Do not use the speaker’s handles for suspended installation. Doing so
can result in damage or injury.
• Do not expose the device to excessive dust or vibrations, or extreme
cold or heat (such as in direct sunlight, near a heater, or in a car during
the day) to prevent the possibility of panel disfiguration or damage to
the internal components.
• Do not place the device in an unstable position where it might
accidentally fall over.
Do not open
Water warning
Location
(6)-1
3
ENGLISH
• Before connecting the device to other devices, turn off the power for all
devices. Before turning the power on or off for all devices, set all
volume levels to minimum.
• Use only speaker cables for connecting speakers to the speaker jacks.
Use of other types of cables may result in fire.
• Be sure to observe the amplifier’s rated load impedance (see page 4),
particularly when connecting speakers in parallel. Connecting an
impedance load outside the amplifier's rated range can damage the
amplifier.
• When choosing a power amplifier to use with your speakers, make sure
that its power output matches the speakers’ power capacity (refer to the
Specifications on page 4). Even if the amplifier’s power output is lower
than the speakers’ PGM (program) power capacity, the speakers may be
damaged when clipping of a high input signal occurs. The following
may cause damage to speakers:
- Feedback caused when using a microphone.
- Continuous high sound pressure level produced by electronic instruments.
- Continuous high-power output of distorted signals.
- Popping noises caused by turning on equipment, or by connecting or
disconnecting system components while the amplifier is turned on.
• When turning on the AC power in your audio system, always turn on the
power amplifier LAST, to avoid speaker damage. When turning the
power off, the power amplifier should be turned off FIRST for the same
reason.
• Do not operate this device at high volume levels or at a level that is
uncomfortable, since it is capable of producing sound levels that could
cause permanent hearing loss. If you experience any discomfort or
ringing in the ears, or suspect an hearing loss, you should consult an
audiologist.
Protective Circuit (poly switch)
All full-range loudspeakers are fitted with a self-resetting poly switch that protects
the high-frequency driver from damage caused by excessive power. If a
loudspeaker cabinet loses high-frequency output, immediately remove power from
the unit and wait for two to three minutes. This should be long enough to allow the
poly switch to reset. Reapply power and check the performance of the high-
frequency driver before continuing, with the power reduced to a level that does not
cause the poly switch to interrupt the signal. (On the subwoofers, the poly switch
protects the woofer and a similar routine should be followed if the output is lost.)
• Use only Neutrik NL4FC plugs for connecting Speakon connectors.
* Illustrations in this manual are for explanatory purposes only, and may
not match the actual appearance of the product during operation.
* Company names and product names used in this Owner’s Manual are
trademarks or registered trademarks of their respective owners.
Before Making Connections
■Phone Plug Wiring
Phone plugs for connection to the phone jack inputs should be wired as
shown on the right. Be sure to use proper speaker cable — NOT shielded
instrument or line cable — for all speaker connections.
■Neutrik NL4FC Plug Wiring
If you will be using the Neutrik connectors for speaker input,
wire the plugs as shown to the right. Be sure to use proper
speaker cable — NOT shielded instrument or line cable — for all
speaker connections.
Connections
Handling caution
Special Notice
Yamaha cannot be held responsible for damage caused by improper use or modifications to the device.
2– (NO USE)
2+ (NO USE)
1+ : HOT (+)
1– : COLD (–)
Neutrik NL4FC connector
Specyfikacje produktu
| Marka: | Yamaha |
| Kategoria: | subwoofer |
| Model: | A15W |
Potrzebujesz pomocy?
Jeśli potrzebujesz pomocy z Yamaha A15W, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą
Instrukcje subwoofer Yamaha
10 Grudnia 2024
10 Grudnia 2024
10 Grudnia 2024
2 Października 2024
22 Września 2024
9 Września 2024
5 Września 2024
5 Września 2024
4 Września 2024
2 Września 2024
Instrukcje subwoofer
- subwoofer Sharp
- subwoofer Pioneer
- subwoofer Technics
- subwoofer Bosch
- subwoofer JBL
- subwoofer Onkyo
- subwoofer Roland
- subwoofer Origin Acoustics
- subwoofer KEF
- subwoofer Bose
- subwoofer Klipsch
- subwoofer Crestron
- subwoofer Behringer
- subwoofer Boss
- subwoofer Marquant
- subwoofer Jensen
- subwoofer Blaupunkt
- subwoofer Speed-Link
- subwoofer Metra
- subwoofer Martin Logan
- subwoofer DAP-Audio
- subwoofer Denon
- subwoofer Phoenix Gold
- subwoofer Audac
- subwoofer Cambridge
- subwoofer Kenwood
- subwoofer Polk
- subwoofer Alpine
- subwoofer Dynaudio
- subwoofer Paradigm
- subwoofer JVC
- subwoofer Memphis Audio
- subwoofer Jamo
- subwoofer Auna
- subwoofer Nubert
- subwoofer LD Systems
- subwoofer Krüger&Matz
- subwoofer Audioengine
- subwoofer Audiotec Fischer
- subwoofer Clarion
- subwoofer Pro-Ject
- subwoofer Fusion
- subwoofer Neumann
- subwoofer Wharfedale
- subwoofer Magnat
- subwoofer Pyle
- subwoofer ELAC
- subwoofer Sonus Faber
- subwoofer Marantz
- subwoofer Bowers & Wilkins
- subwoofer Monitor Audio
- subwoofer Audio Pro
- subwoofer Vonyx
- subwoofer Alto
- subwoofer Peavey
- subwoofer RCF
- subwoofer Harman Kardon
- subwoofer JL Audio
- subwoofer REL Acoustics
- subwoofer Teufel
- subwoofer Dali
- subwoofer Proel
- subwoofer Hifonics
- subwoofer Focal
- subwoofer Kicker
- subwoofer Omnitronic
- subwoofer Mackie
- subwoofer Deaf Bonce
- subwoofer Insignia
- subwoofer Piega
- subwoofer SVS
- subwoofer Arcam
- subwoofer Mac Audio
- subwoofer Infinity
- subwoofer McIntosh
- subwoofer Revel
- subwoofer Dynacord
- subwoofer Orion
- subwoofer Fender
- subwoofer Hertz
- subwoofer Kali Audio
- subwoofer KRK
- subwoofer Atlas Sound
- subwoofer Gemini
- subwoofer Martin
- subwoofer PMC
- subwoofer Definitive Technology
- subwoofer Ground Zero
- subwoofer Stinger
- subwoofer PowerBass
- subwoofer Power Dynamics
- subwoofer Kanto
- subwoofer Rockford Fosgate
- subwoofer Canton
- subwoofer Monacor
- subwoofer Tannoy
- subwoofer Electro-Voice
- subwoofer AudioControl
- subwoofer SPL
- subwoofer Crunch
- subwoofer Match
- subwoofer Indiana Line
- subwoofer HK Audio
- subwoofer Fenton
- subwoofer Sonance
- subwoofer Argon
- subwoofer Cabasse
- subwoofer Audison
- subwoofer Sonos
- subwoofer Musway
- subwoofer AV:link
- subwoofer Renegade
- subwoofer Heco
- subwoofer MB Quart
- subwoofer Massive
- subwoofer Atlantic
- subwoofer QTX
- subwoofer QSC
- subwoofer Lanzar
- subwoofer Genelec
- subwoofer Apart
- subwoofer Bazooka
- subwoofer Skytec
- subwoofer Monoprice
- subwoofer Eve Audio
- subwoofer Yorkville
- subwoofer Axton
- subwoofer Nxg
- subwoofer FBT
- subwoofer OSD Audio
- subwoofer Andover
- subwoofer Soundstream
- subwoofer PSB
- subwoofer Citronic
- subwoofer Bowers Wilkins
- subwoofer James
- subwoofer PSSO
- subwoofer Quadral
- subwoofer Wet Sounds
- subwoofer Extron
- subwoofer BW
- subwoofer Helix
- subwoofer Q Acoustics
- subwoofer Adam
- subwoofer Mission
- subwoofer Martin Audio
- subwoofer Morel
- subwoofer Avid
- subwoofer Ecler
- subwoofer Mtx Audio
- subwoofer Aquatic AV
- subwoofer DB Technologies
- subwoofer GoldenEar Technology
- subwoofer Roswell
- subwoofer Velodyne
- subwoofer Chrysalis
- subwoofer Raveland
- subwoofer ANT
- subwoofer IMG Stage Line
- subwoofer Eikon
- subwoofer ESX
- subwoofer Wavemaster
- subwoofer Fluance
- subwoofer RetroSound
- subwoofer Pyramid
- subwoofer On-Q
- subwoofer Sound Ordnance
- subwoofer MadBoy
- subwoofer Planet Audio
- subwoofer Black Hydra
- subwoofer Totem
- subwoofer Energy
- subwoofer Mirage
- subwoofer Poly-Planar
- subwoofer SSV Works
- subwoofer PrecisionPower
- subwoofer Theater Solutions
- subwoofer Mordaunt Short
- subwoofer Triangle
- subwoofer Audiofrog
- subwoofer AudioSource
- subwoofer KLH Audio
- subwoofer Proficient
- subwoofer Alphasonik
- subwoofer Cerwin-Vega
- subwoofer BMB
- subwoofer Glemm
- subwoofer ButtKicker
Najnowsze instrukcje dla subwoofer
11 Grudnia 2024
10 Grudnia 2024
10 Grudnia 2024
10 Grudnia 2024
10 Grudnia 2024
10 Grudnia 2024
8 Grudnia 2024
8 Grudnia 2024
8 Grudnia 2024
8 Grudnia 2024