Instrukcja obsługi WyreStorm SW-0401-HDBT

WyreStorm nieskategoryzowany SW-0401-HDBT

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla WyreStorm SW-0401-HDBT (4 stron) w kategorii nieskategoryzowany. Ta instrukcja była pomocna dla 4 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/4
IMPORTANT! Installation Requirements
• Visit the product page to download the latest document version, additional
documentation, rmware, and conguration tools.
• Install the latest rmware to ensure that all features described in this
document are available during and after installation.
• Read through the Wiring and Connections section for important wiring
guidelines before creating or choosing premade cables.
• An HDBaseT receiver is required to use this product.
• See Recommended Products for guidelines on choosing a receiver.
• While this product supports CEC, WyreStorm cannot guarantee
compatibility with all forms of CEC communication.
Recommended Products
To take full advantage of the features of this switcher, WyreStorm
recommends the following products be used to complete the installation.
RX-70-4K HDBaseT Receiver – This Class A PoH receiver can be used for
general purpose transmission where IR and RS-232 routing maybe required.
RX-70-4K-ARC HDBaseT Receiver – This Class A PoH receiver can be used
for general purpose transmission where IR and RS-232 routing or Audio
Breakout maybe required.
Note: If CEC control of displays is required, the RX-70-4K-ARC cannot be used
as it does not support this feature.
In the Box
1x SW-0401-HDBT Switcher
1x 12V DC 3A Power Supply
1x AC Power Cord with US Plug
1x AC Power Cord with UK Plug
1x AC Power Cord with EU Plug
2x 3-pin Male Phoenix Connector
1x 4-pin Male Phoenix Connector
3x 5-pin Male Phoenix Connector
2x Mounting Brackets
1x Quickstart Guide (This Document)
Additional Information
Visit the product page at wyrestorm.com for additional content regarding this
product.
• Product API for conguring control via a 3rd party control system.
• Firmware updates – We consistently improve our products and may supply
rmware updates in the future to improve the operation.
Basic Wiring Diagram
Copyright © 2018 WyreStorm Technologies | wyrestorm.com
SW-0401-HDBT Quickstart Guide | 180305
UK: +44 (0) 1793 230 343 | ROW: 844.280.WYRE (9973)
support@wyrestorm.com
1 of 4
WyreStorm recommends reading through this document in its entirety to become familiar with the product’s features prior to starting the installation
process.
4 Input Scaling Smart Switch with CEC and HDBaseT Out
SW-0401-HDBT Quickstart Guide
KEY
HDMI/DisplayPort
HDBaseT
RS-232/Serial
Analog Audio
Analog Video
WyreStorm HDBaseT
Receiver
Control System
Personal Computer
Laptop
Media Player
Video Conference Device
Amplifier
Wiring and Connections
WyreStorm recommends that all wiring for the installation is run and terminated prior to making connections to the switcher. Read through this section in this
entirety before running or terminating the wires to ensure proper operation and to avoid damaging equipment.
HDMI/HDBaseT Wiring
IMPORTANT! HDMI/HDBaseT Wiring Guidelines
• The use of patch panels, wall plates, cable extenders, kinks in cables, and
electrical or environmental interference will have an adverse effect on HDMI
and Ethernet transmission limiting performance. Steps should be taken to
minimize or remove these factors completely during installation for best
results.
• WyreStorm recommends using high quality HDMI cables such as
WyreStorm Active Optical or Express to ensure the highest content
performance available.
• The type of category cable and length used can restrict the available video
resolution. While Cat5e can be used, WyreStorm recommends using Cat6
or higher to ensure the highest content performance available. See Video
Resolutions in the Specications table before determining cable type and
length.
Pin 1
Pin 8
Wire colors shown follow EIA/TIA-568B standard.
Pin 1:
Pin 2:
Pin 3:
Pin 4:
Pin 5:
Pin 6:
Pin 7:
Pin 8:
White/Orange
Orange
White/Green
Blue
White/Blue
Green
White/Brown
Brown
RS-232 Communication
Most control systems and computers are DTE where pin 2 is RX, this can vary from device to device. Refer to the documentation for the connected device for
pin functionally to ensure that the correct connections can be made.
See SW-0401-HDBT API located on the website for commands and conguration of communication ports.
RS-232 Switcher Control RS-232 HDBT to Zone
CEC Link Control
The CEC link allows for a hard wire contact closure connection to turn CEC On
and Off to control the standby mode of the display.
Contact In/Tally Out
Contact connections are provided to allow for switching sources and feedback
to a contact closure button on a desk or wall plate.
Audio Out
The Audio Out supports both balanced and unbalanced connections. Wiring may vary on the 3rd party device, refer to the documentation for the device being
connected.
Balanced Connections Unbalanced Connections
Copyright © 2018 WyreStorm Technologies | wyrestorm.com
SW-0401-HDBT Quickstart Guide | 180305
UK: +44 (0) 1793 230 343 | ROW: 844.280.WYRE (9973)
support@wyrestorm.com
2 of 4
EDID/Scaler Settings
The SW-0401-HDBT handles EDID differently than other switchers and has
direct settings for EDID. When connected to a source and display the EDID is
still passed to the source, however the output of the switcher can be scaled to
match the resolution of the display and maintain the highest output from the
sources. This allows for HD sources to be scaled up to UHD and UHD sources
to be scaled down to maintain a consistent picture quality.
EDID/Scaler Dial
Scaling Resolution Rotary Switch
Auto Scaling 0
1024x768p @60Hz 1
1280x720p @60Hz 2
1280x800p @60Hz 3
1366x768p @60Hz 4
1600x1200p @60Hz 5
1920x1080p @60Hz 6
1920x1200p @60Hz 7
3840x2160p @30Hz 8
API Control 9
Audio De-Embed/Control Method
The SW-0401-HDBT has modes available to control how the audio is handled
from the source HDMI, how sources are switched, and how CEC controls
display standby. These are congured via a 4 position dip switch as dened in
the table.
Mode Selection
Function Operation
Audio De-Embed
Switch 1
Audio De-Embedded from
HDMI Out (Default) - OFF
No Function - On
Source Selection Mode
Switch 2
Auto and Manual Switching
Enabled (Default) - OFF
Manual Switching Only - On
CEC Control
Switch 3
Auto and Manual CEC Con-
trol (Default) - OFF
Manual CEC Control Only
Control Method
Switch 4
API and Manual Control
(Default) - OFF
Manual Control Only - On
Troubleshooting
No or Poor Quality Picture (snow or noisy image)
• Verify that power is being supplied to all devices in the system and that they are powered On.
• Verify that all source and HDBaseT connections are not loose and are functioning properly.
• Verify that all HDMI/HDBaseT Wiring is properly terminated.
• Verify that the EDID/Scaler Settings are set to a resolution that the display can receive.
• Verify that the switcher, receiving device, and display support the output resolution of the source.
Refer to table.Video Resolutions (Max) in the Specications
• If transmitting 3D or 4K, verify that the HDMI cables used are 3D or 4K rated.
Troubleshooting Tips:
• WyreStorm recommends using a cable tester or connecting the cable to other devices to verify functionality.
• Use a ashlight to locate the IR receiver behind any tinted panels on the device being control
Copyright © 2018 WyreStorm Technologies | wyrestorm.com
SW-0401-HDBT Quickstart Guide | 180305
UK: +44 (0) 1793 230 343 | ROW: 844.280.WYRE (9973)
support@wyrestorm.com
3 of 4

Specyfikacje produktu

Marka: WyreStorm
Kategoria: nieskategoryzowany
Model: SW-0401-HDBT

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z WyreStorm SW-0401-HDBT, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje nieskategoryzowany WyreStorm

WyreStorm

WyreStorm TX-H2X-VLC Instrukcja

24 Września 2024
WyreStorm

WyreStorm TX-H2X-HDBT Instrukcja

24 Września 2024
WyreStorm

WyreStorm SW-0401-HDBT Instrukcja

24 Września 2024
WyreStorm

WyreStorm CON-H2-SCL Instrukcja

24 Września 2024
WyreStorm

WyreStorm TX-SW-IW-0201 Instrukcja

24 Września 2024
WyreStorm

WyreStorm EX-100-4K-PRO Instrukcja

24 Września 2024
WyreStorm

WyreStorm TX-POH-110 Instrukcja

24 Września 2024
WyreStorm

WyreStorm TX-POH-100 Instrukcja

24 Września 2024
WyreStorm

WyreStorm TX-POH-090 Instrukcja

24 Września 2024
WyreStorm

WyreStorm TX-POH-070 Instrukcja

24 Września 2024

Instrukcje nieskategoryzowany

Najnowsze instrukcje dla nieskategoryzowany

Meec Tools

Meec Tools 010-084 Instrukcja

6 Października 2024
Outwell

Outwell Scenic Road 250 Instrukcja

5 Października 2024
Impact

Impact Qualite QL-3560-LED Instrukcja

4 Października 2024
Impact

Impact QuikBalance Instrukcja

4 Października 2024
Impact

Impact CA-112 Instrukcja

4 Października 2024
Impact

Impact Forever Ready Cool FRC-24-LED Instrukcja

4 Października 2024
Impact

Impact LS-BHA Instrukcja

4 Października 2024
Impact

Impact LKB-5C Instrukcja

4 Października 2024
Impact

Impact Varipole Drop Ceiling Adapter Instrukcja

4 Października 2024
Impact

Impact RST-001 Instrukcja

4 Października 2024