Instrukcja obsługi WilTec 52007


Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla WilTec 52007 (6 stron) w kategorii Pompa wodna. Ta instrukcja była pomocna dla 6 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/6
Operation Manual
Wavemaker Pump JVP-series
52006, 52007, 52008, 52009, 52012, 52013, 52014
Similar to image, may vary depending on model
Read and follow the operating instructions and safety information before use.
Technical changes reserved!
Due to further developments, illustrations, functioning steps, and technical data can differ slightly.
© by WilTec Wildanger Technik GmbH Item 52006–52009, 52012–52014 Page 2
http://www.WilTec.de
http://www.aoyue.eu -1 09 2022
http://www.teichtip.de
The information contained in this document may alter at any time without previous notice. It is prohibited
to copy or spread any parts of this document in any way without prior written allowance. All rights re-
served.
The WilTec Wildanger Technik GmbH cannot be held accountable for any possible mistakes in this
operating manual, nor in the diagrams and figures shown.
Even though, the WilTec Wildanger Technik GmbH has undergone biggest possible efforts to ensure
that the operating manual is complete, faultless, and up to date, mistakes cannot be entirely avoided.
If you should find a mistake or wish to make a suggestion for improvement, we look forward to hearing
from you.
Send an e-mail to:
service@wiltec.info
or use our contact form:
https://www.wiltec.de/contacts/
The most recent version of this manual in various languages can be found in our online shop via:
https://www.wiltec.de/docsearch
Our postal address is:
WilTec Wildanger Technik GmbH
Königsbenden 12
52249 Eschweiler
Germany
To return orders for exchange, repair, or other purposes, please use the following address. Attention!
To allow for a smooth execution of your complaint or return, it is important to contact our customer
service team before returning the goods.
Returns Department
WilTec Wildanger Technik GmbH
Königsbenden 28
52249 Eschweiler
E-mail: service@wiltec.info
Tel: +49 2403 55592–0
Fax: +49 2403 55592–15
© by WilTec Wildanger Technik GmbH Item 52006–52009, 52012–52014 Page 3
http://www.WilTec.de
http://www.aoyue.eu -1 09 2022
http://www.teichtip.de
Introduction
Thank you very much for buying this quality product. To reduce the risk of injury, we ask you to regard
some basic safety instructions, when using this product. Please read the operating manual thoroughly
and make sure you have understood them. Keep the operating manual safe for future reference.
Safety Notes
ATTENTION:
The use of the device is only allowed with a residual current circuit breaker with a nominal current of up
to 30 mA (according to VDE 0100 part 702 and 738).
The device is not meant to be operated by people (including children) with limited physical, sensory, or
mental abilities, or with lack of experience and/or knowledge, unless they are being supervised by a
person responsible for their health and safety or have been instructed on how to use the device. Children
should be supervised to ensure that they do not play with the device.
ATTENTION:
Before every use, visually examine the device. Do not use the device if safety measures are
damaged or worn. Never overrule safety measures.
Only use the device for the purpose stated in this operating manual.
You are responsible for the safety in the working area.
If the cable or the mains plug should be damaged due to external influences, the cable cannot
be repaired, but needs to be exchanged by a qualified technician!
The rated voltage of 230 V AC on the type label needs to comply with the existing voltage.
Never lift, transport, or attach the device by its electricity cable.
Make sure that all electrical plug connections are in an area that cannot be flooded and are
protected from humidity.
Before carrying out any work on the device, pull the electricity plug.
Avoid the device being exposed to water streams or rain.
The operator is responsible for the compliance with local safety and assembly rules. If neces-
sary, ask a qualified technician.
In case the device should break down, repair work should only be carried out by a qualified
technician. Damages occurring from an improper repair or maintenance are not the manufac-
turer’s responsibility.
Read all safety notes and instructions. Non-compliance with the safety notes and instructions
can lead to electrical shock, fire and/ or serious injury.
Keep the safety notes and instructions for future reference.
Functions
New design – flexible adjustment of the wave direction
Regulation valve on the outlet of the pump
Flexible mounting via a magnet


Specyfikacje produktu

Marka: WilTec
Kategoria: Pompa wodna
Model: 52007

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z WilTec 52007, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje Pompa wodna WilTec

WilTec

WilTec 50453 Instrukcja

29 Września 2024
WilTec

WilTec 52007 Instrukcja

29 Września 2024
WilTec

WilTec 50266 Instrukcja

29 Września 2024
WilTec

WilTec 50268 Instrukcja

29 Września 2024
WilTec

WilTec 50921 Instrukcja

29 Września 2024
WilTec

WilTec 50919 Instrukcja

29 Września 2024
WilTec

WilTec 50971 Instrukcja

29 Września 2024
WilTec

WilTec 50455 Instrukcja

29 Września 2024
WilTec

WilTec 61965 Instrukcja

29 Września 2024
WilTec

WilTec 51530 Instrukcja

29 Września 2024

Instrukcje Pompa wodna

Najnowsze instrukcje dla Pompa wodna

Dimplex

Dimplex WI 22 TE Instrukcja

11 Października 2024
DAB

DAB FEKA Instrukcja

9 Października 2024
Einhell

Einhell BG-DP 3730 Instrukcja

9 Października 2024
Einhell

Einhell Royal HW 811 Instrukcja

9 Października 2024
Hayward

Hayward S240SLETL Instrukcja

9 Października 2024
Anova

Anova BE1450ASC Instrukcja

8 Października 2024
Anova

Anova BA2C10 Instrukcja

8 Października 2024
Einhell

Einhell RG-GP 1139 Instrukcja

8 Października 2024