Instrukcja obsługi WilTec 51530


Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla WilTec 51530 (8 stron) w kategorii Pompa wodna. Ta instrukcja była pomocna dla 5 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/8
Instruction Manual
Waste Water Pump
51530–51536, 51542–51544
Illustration similar, may vary depending on model
Please read and follow the operating instructions and safety information prior to initial operation.
Technical changes reserved!
Illustrations, functional steps, and technical data may deviate insignificantly due to continuous further
developments.
https://www.XPOtool.com Item 51530–51536, 51542–51544 Page 2
The Tool Experts
08 2022-1
The information contained in this document may alter at any time without prior notice. No part of this
document may be copied or otherwise duplicated without prior written consent. All rights reserved.
WilTec Wildanger Technik GmbH cannot be held liable for any possible mistakes in this operating man-
ual, nor in the diagrams and illustrations shown.
Although WilTec Wildanger Technik GmbH has made every possible effort to ensure that this operating
manual is complete, accurate, and up- -date, errors cannot be ruled out entirely.to
If you have found an error or wish to suggest an improvement, we look forward to hearing from you.
Send us an e-mail to:
service@wiltec.info
or use our contact form:
https://www.wiltec.de/contacts/
The most recent version of this manual in several languages can be found in our online shop:
https://www.wiltec.de/docsearch
Our postal address is:
WilTec Wildanger Technik GmbH
Königsbenden 12
52249 Eschweiler Germany
To return your goods for exchange, repair, or other purposes, please use the following address. Atten-
tion! To allow for a trouble-free complaint or return, it is important to contact our customer service team
before returning your goods.
Retourenabteilung
WilTec Wildanger Technik GmbH
Königsbenden 28
52249 Eschweiler Germany
E-mail: service@wiltec.info
Phone: +49 2403 55592–0
Fax: (+49 2403 55592–15)
https://www.XPOtool.com Item 51530–51536, 51542–51544 Page 3
The Tool Experts
08 2022-1
Introduction
Thank you for choosing to purchase this quality product. To minimise the risk of injury, we ask you to
always take some basic safety precautions when using this product. Please read this operating manual
carefully and make sure that you understand it.
Keep these operation instructions in a safe place.
Safety notes for the pump
General remarks
Know the application of the pump and ensure to be familiar with the limitations and potential
dangers.
Make sure that the electricity source corresponds to the requirements of the device.
Disconnect the pump from the electricity supply before carrying out any maintenance work.
Release the pressure from the system before maintaining a part.
Release the liquid from the system before maintaining the pump.
Secure the pressure line before starting the pump. An unsecured pressure line can retaliate and
thus lead to injuries and/or damages.
Check the hose for wear and damage before every use. Make sure that all connectors are
attached and secure.
Occasionally check the pump and the system components. Keep the pump and the system free
of residues and foreign bodies. If necessary, carry out a routine maintenance.
Keep a remedy for pressure relief near pumps, the pressure lines of which can be closed off or
clogged.
Personal safety
Always wear protective glasses when working with the pump.
Keep your working area clean, tidy, and well illuminated. Store tools and equipment when the
pump is not in use.
Keep bystanders away from your working area.
Make sure to make the working area safe for children by using padlocks and main switches and
by removing ignition keys.
When connecting an electrically powered pump, all electrical and safety instructions need to be
regarded.
The pump motor is equipped with an automatic resetting thermal protection and can unexpect-
edly re-start.
Danger of electric shock: This device is designed to only be operated with 230 V. To reduce the
risk of electric shock, ensure that the pump is connected to a safety plug properly installed.
The entire wiring should be done by a qualified technician.
Protect the power cable from sharp objects, hot surfaces, oil, and chemicals. Avoid bending the
cable. Damaged or worn cables need to be replaced immediately.
Use cables with a sufficient size to minimise a voltage drop to the motor.
Do not touch a running motor. Modern motors can reach very high temperatures when running.
Additional safety precautions
Have the following checked by an expert before using the pump:
Ground connection
Neutral conductor
Fault-current circuit breaker needs to comply with the safety regulations and needs to work
faultlessly.
The electrical connections need to be protected from humidity.
When a danger of flooding occurs, the electrical connections need to be placed in a high area.


Specyfikacje produktu

Marka: WilTec
Kategoria: Pompa wodna
Model: 51530

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z WilTec 51530, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje Pompa wodna WilTec

WilTec

WilTec 50453 Instrukcja

29 Września 2024
WilTec

WilTec 52007 Instrukcja

29 Września 2024
WilTec

WilTec 50266 Instrukcja

29 Września 2024
WilTec

WilTec 50268 Instrukcja

29 Września 2024
WilTec

WilTec 50921 Instrukcja

29 Września 2024
WilTec

WilTec 50919 Instrukcja

29 Września 2024
WilTec

WilTec 50971 Instrukcja

29 Września 2024
WilTec

WilTec 50455 Instrukcja

29 Września 2024
WilTec

WilTec 61965 Instrukcja

29 Września 2024
WilTec

WilTec 51530 Instrukcja

29 Września 2024

Instrukcje Pompa wodna

Najnowsze instrukcje dla Pompa wodna

Dimplex

Dimplex WI 22 TE Instrukcja

11 Października 2024
DAB

DAB FEKA Instrukcja

9 Października 2024
Einhell

Einhell BG-DP 3730 Instrukcja

9 Października 2024
Einhell

Einhell Royal HW 811 Instrukcja

9 Października 2024
Hayward

Hayward S240SLETL Instrukcja

9 Października 2024
Anova

Anova BE1450ASC Instrukcja

8 Października 2024
Anova

Anova BA2C10 Instrukcja

8 Października 2024
Einhell

Einhell RG-GP 1139 Instrukcja

8 Października 2024