Instrukcja obsługi Vulcan 960RX

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Vulcan 960RX (2 stron) w kategorii płyta grillowa. Ta instrukcja była pomocna dla 4 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/2
Project _________________________________________________________________________
AIA # SIS # __________________________________ __________________________________
Item # C.S.I. Section 114000 _________________________________ Quantity ___________
Approved by_______________________________________ Date___________ Approved by_________________________________________ Date______________
Printed in U.S.A. Vulcan 2006 Northwestern Pkwy, Louisville, KY 40203 Phone: 800-814-2028 Fax: 800-444-0602 • • www.vulcanequipment.com F38303 (09-21)
900RX SERIES
Heavy Duty Gas Griddles
900RX SERIES – Heavy Duty Gas Griddles
SPECIFIER STATEMENT
Low profile heavy duty gas griddle, Vulcan Model
No._______. Stainless steel front, sides and front top
ledge. Fully welded stainless and aluminized steel
body frame. 11" low profile cooking height on 4" legs.
1" thick polished steel griddle plate with 12 gage,
4" stainless steel back and tapered side splashes.
Grease chute is fully welded to stop grease migration.
One 27,000 BTU/hr. “Ushaped aluminized steel burner
and mechanical snap action thermostat for each
12" of griddle width. Chrome thermostat knob guards.
Temperature adjusts from 20 to 550° F. One pilot
safety for every two burners. Manual shut-o valve.
312" wide stainless steel grease trough. 120V 50/60Hz 1
Amp single phase electric ignition circuit. Plug type is
NEMA 5-15 USA. 34" rear gas connection and gas pres-
sure regulator.
Exterior Dimensions:
_____"w x 33" d x 151 " h on 4" legs.2
CSA design certified. NSF listed.
SPECIFY TYPE OF GAS WHEN ORDERING
SPECIFY ALTITUDE WHEN ABOVE 2,000 FT.
MODELS
924RX: 24" w x 24" d griddle plate
936RX: 36" w x 24" d griddle plate
948RX: 48" w x 24" d griddle plate
960RX: 60" w x 24" d griddle plate
972RX: 72" w x 24" d griddle plate
STANDARD FEATURES
Stainless steel front, sides and front top ledge with “Cool Bullnose”
design
Fully welded stainless and aluminized steel chassis frame
11" low profile cooking height on 4" adjustable legs
1" thick polished steel griddle plate with 12 gage, 4" stainless steel
back and tapered side splashes
Spatula wide 31 " grease gutter and chute is fully welded for easier 2
cleaning and to stop grease migration
One 27,000 BTU/hr. “U” shaped aluminized steel burner for every
12" of griddle width
One embedded snap action thermostat per burner with
temperature adjust from 200°F to 550°F
Large 6 quart stainless steel grease drawer (2 drawers on 60"
and 72" models)
Heavy duty chromed thermostat knob guards
One pilot safety valve for every two burners; safety will
completely shut o gas to pilot and burners if pilot extinguishes
Manual shut-o valve for gas inlet
Dual (manual/electric) ignition
Bottom heat shields
3 " rear gas connection and gas pressure regulator4
120V 50/60Hz 1 Amp single phase with NEMA 5-15 USA plug
One year limited parts and labor warranty
OPTIONS
Hexavalent chrome plated cooking surface
30" deep plate
Stainless steel stand with marine edges and casters
Cutting board, condiment rail, plate rail and banking strip
accessories
Full or partially grooved griddle plate
Model 948RX
SELL SHEET
F38303 (09-21) Vulcan 2006 Northwestern Pkwy, Louisville, KY 40203 Phone: 800-814-2028 Fax: 800-444-0602 • • www.vulcanequipment.com Printed in U.S.A.
900RX SERIES
Heavy Duty Gas Griddles
As continued product improvement is a policy of Vulcan, specifications are subject to change without notice.
NOTES:
1. 2.19" FROM RIGHT FOR 24", 36" & 48" GRIDDLES
30.00" FROM RIGHT FOR 60" & 72" GRIDDLES
2. ADJUSTABLE LEGS ARE 2" IN DIAMETER.
LEGS ARE RECESSED 1
1
4
" FROM EACH SIDE.
12.00"
[305]
5.00" [122]
MANIFOLD
7.70"
[196] 20.13" [511]
4.00" [102]
3.40" [86] GUTTE
R
34.00" [864]
24.00" [610]
1" [25] THICK GRIDDLE PLATE
11.18" [284] COOK SURFTO ACE
24", 36", 48", 60", 72"
[610, 914, 1219, 1524, 1859]
19.5", 31.5", 43.5", 55.5", 67.5"
[495, 800, 1105, 1410, 1715]
15.3"
[387]
6 QUART
CAPACITY
GREASE CAN
4 - 5.75"
[102 - 146]
ADJU ABLEST
LEG
3.42" [91]
3/4 NPT
MANIFOLD
PIPE PTY
3/4 NPT
SHUT-OFF
EVALV
POWER CORD
2.19 [56] PTY
SEE NOTE 1
8FT, 105°C NEMA 5
POWER CORD
5.0" [122]
MANIFOLD
3.47"
[89]
11.38"
[289]
7.70"
[196]
4"
[102]
31.5" [800] ANDARD UNITST
37.5" [953] DEEP UNIT
24" [610] ANDARD UNITST
30" [763] DEEP UNIT
1" [25] THICK GRIDDLE PLATE
20.13" [511] ANDARD UNITST
26.13" [664] DEEP UNIT
11.18" [284] COOK SURFTO ACE
3" [76] POWER CORD
CAD and/ ailableor Revit Files Av
INSTALLATION INSTRUCTIONS
1. A gas pressure regulator supplied with the unit must be installed;
Natural Gas 4.0" (102 mm) W.C.
Propane Gas 10.0" (254 mm) W.C.
2. All models require a 6" (152 mm) clearance at both sides and rear
adjacent to combustible and 0" from non-combustible construc-
tions. All models require a 4" (102mm) bottom clearance and must
be installed with minimum 4" legs.
3. These units are manufactured for installation in accordance with
ANSI/NFPA-70, National Electrical code.
An adequate ventilation system is required for Commercial Cooking
Equipment (NFPA No. 96). Information may be obtained by writing
to the National Fire Protection Association, Batterymarch Park,
Quincy, MA 02169.
4. These units are manufactured for installation in accordance with
National Fuel Gas Code, ANSI-Z223.1/NFPA #54 (latest edition).
Copies may be obtained from The American Gas Association,
Accredited Standards Committee Z223 @ 400 N. Capital St. NW,
Washington, DC 20001, or the Secretary Standards Council, NFPA,
1 Batterymarch Park, Quincy, MA 02169-7471.
NOTE: In The Commonwealth of Massachusetts
All gas appliances vented through ventilation hood or exhaust sys-
tem equipped with a damper or with a power means of exhaust shall
comply with 248 CMR.
5. This appliance is manufactured for commercial installation only and
is not intended for home use.
INSTALL ALATION MANU
Model Width Depth
Overall
Height*
Working
Height*
Number
of Burners
Total
BTU/Hr.
Number
of Drawers
Approximate
Shipping Weight
924RX
24" 311⁄ " 1521
⁄ " 1141 " 2 54,000 1 285 lbs./129 kg.8
936RX
36" 311⁄ " 1521
⁄ " 1141 " 3 81,000 1 400 lbs./181 kg.8
948RX
48" 311⁄ " 1521
⁄ " 1141 " 4 108,000 1 480 lbs./218 kg.8
960RX
60" 311⁄ " 1521
⁄ " 1141 " 5 135,000 2 650 lbs./295 kg.8
972RX
72" 311⁄ " 1521
⁄ " 1141 " 6 162,000 2 790 lbs./358 kg.8
*These are nominal dimensions and can vary by +1.75" with adjustable legs.
Front Grease Trough - Side View
Front View
Rear Grease Trough - Side View

Specyfikacje produktu

Marka: Vulcan
Kategoria: płyta grillowa
Model: 960RX

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Vulcan 960RX, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje płyta grillowa Vulcan

Vulcan

Vulcan VMG48 Instrukcja

30 Września 2024
Vulcan

Vulcan VMG60 Instrukcja

30 Września 2024
Vulcan

Vulcan VMG24 Instrukcja

30 Września 2024
Vulcan

Vulcan VMG36 Instrukcja

30 Września 2024
Vulcan

Vulcan HEG60E Instrukcja

25 Września 2024
Vulcan

Vulcan 960RX Instrukcja

25 Września 2024
Vulcan

Vulcan MSA36 Instrukcja

25 Września 2024
Vulcan

Vulcan MSA60 Instrukcja

25 Września 2024
Vulcan

Vulcan HEG48E Instrukcja

25 Września 2024
Vulcan

Vulcan HEG72E Instrukcja

25 Września 2024

Instrukcje płyta grillowa

Najnowsze instrukcje dla płyta grillowa

TriStar

TriStar PD-8766AH Instrukcja

14 Października 2024
Coyote

Coyote C1C28-FS Instrukcja

9 Października 2024
Coyote

Coyote C2C36 Instrukcja

9 Października 2024
Coyote

Coyote C1C28 Instrukcja

9 Października 2024
Taco Tuesday

Taco Tuesday TTFGR20RD Instrukcja

9 Października 2024
Ufesa

Ufesa BB7640 Instrukcja

9 Października 2024
Ufesa

Ufesa BB7650 Instrukcja

9 Października 2024
Ufesa

Ufesa PR2000 Instrukcja

9 Października 2024
Ufesa

Ufesa Aspen Instrukcja

9 Października 2024
Ufesa

Ufesa Teide Instrukcja

9 Października 2024