Instrukcja obsługi Viking K-1200-IP
Viking
System kontroli dostępu
K-1200-IP
Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Viking K-1200-IP (25 stron) w kategorii System kontroli dostępu. Ta instrukcja była pomocna dla 7 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek
Strona 1/25
Features
Specifications
Information: 715-386-8861
www.VikingElectronics.com
• Vandal Resistant Features: 14 gauge louvered 316 stainless steel faceplate with
permanent laser etched graphics. Speaker/mic screen. Heavy duty metal keypad
buttons and T-10 Security Torx drive mounting screws.
• Marine grade 316 stainless steel faceplate and screws. Weather Resistant Features:
Keypad internally sealed per IP67. Mylar speaker. Self-draining mic mount. Faceplate,
mic and speaker gaskets.
• Two sets of SPDT 2 Amp relay contacts for door/gate or camera control
• Optional for Secure Remote Relay Control, see RC-4A DOD 582
• Blue “Call /Status” LED indicator
• SIP compliant (see page 2 for compatible SIP servers and IP phone systems)
• Outbound Proxy, Authentication ID, Peer to Peer, VLAN Tagging
• PoE powered (class 2, <6.5 Watts)
• Automatic Noise Canceling (ANC) feature for operation in noisy environments
• Viking’s proprietary VOX switching eliminates the need for “Push to Talk” mode
• Network downloadable firmware
• 26 bit Wiegand input for optional proximity card readers, see and DOD 221 228
• 26 Bit Wiegand output connect to card reader input of an Access Control System
• Programmable to speed dial up to 12 numbers
Power: PoE class 2 (<6.5 Watts)
Dimensions: Overall: 5” x 10” x 2.5” (127 mm x 254 mm x 63.5 mm)
Rough-in box: 4.5” x 9.12” x 2.5” (114 mm x 232 mm x 64 mm)
Shipping Weight: K-1200-IP: 4.2 lbs (1.9 kg), K-1200-IP-EWP: 4.4 lbs (2.0 kg)
Operating Temperature: -40°F to 140°F (-40°C to 60°C)
Humidity - Standard Products: 5% to 95% non-condensing
Humidity - EWP Products: Up to 100%
Audio Codecs: G711u, G711a, G722
Network Compliance: IEEE 802.3 af PoE, SIP 2.0 RFC3261, 100BASE-TX with auto cross over
Regulatory Compliance: CE, FCC Part 15 and Canada ICES-003 Class A
Connections: (1) RJ45 10/100 Base-T, (14) gel-filled butt connectors
Installation requires the assistance of a
Network Administrator / IT Technician.
!
The K-1200-IP is a durable and attractive handsfree phone for apartment and residential door entry
applications requiring a vandal resistant VoIP speaker phone. The phone is designed to provideK-1200-IP
quick and reliable handsfree communication for SIP VoIP phone systems or cloud based service providers.
The unit can be programmed from any PC on the same LAN or remotely using a Static IP Address. The
K-1200-IP entry phone can dial up to 12 programmable numbers and 12 rollover numbers. The brushed
stainless steel faceplate has a built-in 12 resident directory with a waterproof, scratch resistant lens and 12
buttons for single push auto-dialing of a tenant’s phone number or business extension.
When the phone is connected to an apartment or business tenant, a built-in contact closure mayK-1200-IP
be activated to control an electric gate or door strike. Up to 1,000 keyless entry codes may be programmed,
providing tenants with keyless entry. A 26 bit Wiegand input is provided for adding an optional proximity
card reader with capacity to program up to 1,000 card numbers. Keyless entry codes and card numbers
can be programmed to only allow access at specific times and/or day of the week. The includesK-1200-IP
a request for exit (REX) input and also offers event logging with time and date stamp.
The K-1200-IP-EWP K-1200-IP shares all of the features of the in addition to Enhanced Weather Protection
(EWP) for outdoor installations where the unit is exposed to precipitation or condensation. EWP products
are designed to meet IP66 standards and may feature foam rubber gaskets, sealed connections, gel-filled
butt connectors, as well as potted circuit boards. For more information on EWP, see . DOD 859
• Gate Entrance
• Courtesy Assistance Phone
• Customer Service Phone
• Automated Teller (ATM) Phone
K-1200-IP-EWP
(shown in optional VE-5x10
surface mount box sold separately)
• Cycles to rollover phone number on busy or no-answer
• Program up to 1,000 keyless entry codes and/or proximity card numbers
• Keyless entry codes and proximity card numbers can be programmed to only allow
access at specific times and days of week
• Event logging with time and date stamp
• Optional Enhanced Weather Protection (EWP), EWP products are designed to meet IP66
Ingress Protection Rating, see DOD 859
• Hangs up on busy signal, time-out or touch tone command
• Remotely programmable
• Extended temperature range -40°F to 140°F
• Programmable volume adjustments for microphone and speaker
• Selectable auto-answer feature for monitoring
• Flush mount with included Zinc plated steel rough-in box,
• Surface mount using an optional surface mount box (not included, see VE-5x10 DOD 424)
• Optional Long Range RFID receiver, see LRR-4 DOD 226
• Optional kit to illuminate the front panel at night, see VE-LIGHT DOD 428
• Diagnostics for testing microphone, speaker and relays
• Door Entry Phone
• Apartment Entry Phone
• Kiosk Phone
Vandal Resistant VoIP Entry Phone System
with Built-In Directory and 12 Button Auto Dialer
K-1200-IP
“Brushed 316 Stainless Steel”
(similar to brushed nickel)
Applications
PRODUCT
MANUAL
Designed, Manufactured and Supported in the USA
K-1200-IP Series
VoIP Entry Phone System
with 12 Button Auto Dialer
September 28 , 2021
SECURITY & COMMUNICATION
VIKING
2
VoIP SIP System Compatibility
For compatibility and vendor specific detailed configuration instructions, see the Viking VoIP
SIP System Compatibility List, DOD 944. To open and download this PDF file:
1. Go to www.vikingelectronics.com
and enter in the search box 944
2. Click Application Note (DOD 944)
to open and download the PDF
Scan the QR code below to open
and download the Viking VoIP
SIP System Compatibility List - OR -
Important: Exclusion from this list means only that compatibility has not been verified, it does not mean
incompatibility. If you have questions, please call Viking Electronics at 715-386-8861.
3
Definitions
Client: A computer or device that makes use of a server. As an example, the client might request a particular file from the server.
DHCP: Dynamic Host Configuration Protocol. In this procedure the network server or router takes note of a client’s MAC address and
assigns an IP address to allow the client to communicate with other devices on the network.
DNS Server: A DNS (Domain Name System) server translates domain names (ie: www.vikingelectronics.com) into an IP address.
Ethernet: Ethernet is the most commonly used technology. An Ethernet Local Area Network typically uses twisted pair wires toLAN
achieve transmission speeds up to 1Gbps.
Host: A computer or device connected to a network.
Host Name: A host name is a label assigned to a device connected to a computer network that is used to identify the device in various
forms of network communication.
Hosts File: A file stored in a computer that lists host names and their corresponding IP addresses with the purpose of mapping addresses
to hosts or vice versa.
Internet: A worldwide system of computer networks running on protocol which can be accessed by individual computers or networks.IP
IP: Internet Protocol is the set of communications conventions that govern the way computers communicate on networks and on the
Internet.
IP Address: This is the address that uniquely identifies a host on a network.
LAN: Local Area Network. A LAN is a network connecting computers and other devices within an office or building.
Lease: The amount of time a DHCP server reserves an address it has assigned. If the address isn’t used by the host for a period of
time, the lease can expire and the address can be assigned to another host.
MAC Address: MAC stands for Media Access Control. A MAC address, also called a hardware address or physical address, is a unique
address assigned to a device at the factory. It resides in the device’s memory and is used by routers to send network traffic to the correct
IP address. You can find the MAC address of your K-1200-IP phone printed on a white label on the top surface of the PoE LAN port.
Router: A device that forwards data from one network to another. In order to send information to the right location, routers look at IP
Address, and Subnet Mask. MAC Address
RTP: Real-Time Transport Protocol is an Internet protocol standard that specifies a way for programs to manage the real-time transmission
of multimedia data over either unicast or multicast network services.
Server: A computer or device that fulfills requests from a client. This could involve the server sending a particular file requested by the
client.
Session Initiation Protocol (SIP): Is a signaling communications protocol, widely used for controlling multimedia communication sessions
such as voice and video calls over Internet Protocol ( ) networks. The protocol defines the messages that are sent between endpoints,IP
which govern establishment, termination and other essential elements of a call.
Static IP Address: A static IP Address has been assigned manually and is permanent until it is manually removed. It is not subject to the
Lease limitations of a Dynamic IP Address assigned by the DHCP Server. The default static IP Address is: 192.168.154.1
Subnet: A portion of a network that shares a common address component. On TCP/IP networks, subnets are defined as all devices
whose IP addresses have the same prefix. For example, all devices with IP addresses that start with 100.100.100. would be part of the
same subnet. Dividing a network into subnets is useful for both security and performance reasons. IP networks are divided using a subnet
mask.
TCP/IP: Transmission Control Protocol/Internet Protocol is the suite of communications protocols used to connect hosts on the Internet.
TCP/IP uses several protocols, the two main ones being TCP and IP. TCP/IP is built into the UNIX operating system and is used by the
Internet, making it the de facto standard for transmitting data over networks.
TISP: Telephone Internet Service Provider
WAN: Wide Area Network. A WAN is a network comprising a large geographical area like a state or country. The largest WAN is the
Internet.
Wireless Access Point (AP): A device that allows wireless devices to connect to a wired network using Wi-Fi, or related standards. The
AP usually connects to a router (via a wired network) as a standalone device, but it can also be an integral component of the router itself.
Wireless Repeater (Wireless Range Extender): takes an existing signal from a wireless router or access point and rebroadcasts it to
create a second network. When two or more hosts have to be connected with one another over the IEEE 802.11 protocol and the distance
is too long for a direct connection to be established, a wireless repeater is used to bridge the gap.
Specyfikacje produktu
| Marka: | Viking |
| Kategoria: | System kontroli dostępu |
| Model: | K-1200-IP |
Potrzebujesz pomocy?
Jeśli potrzebujesz pomocy z Viking K-1200-IP, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą
Instrukcje System kontroli dostępu Viking
9 Października 2024
9 Października 2024
9 Października 2024
9 Października 2024
9 Października 2024
9 Października 2024
9 Października 2024
9 Października 2024
9 Października 2024
9 Października 2024
Instrukcje System kontroli dostępu
- System kontroli dostępu Hikvision
- System kontroli dostępu DSC
- System kontroli dostępu Vimar
- System kontroli dostępu Dahua Technology
- System kontroli dostępu Delta Dore
- System kontroli dostępu Panduit
- System kontroli dostępu Speco Technologies
- System kontroli dostępu Chief
- System kontroli dostępu Assa Abloy
- System kontroli dostępu Axis
- System kontroli dostępu Abus
- System kontroli dostępu Marmitek
- System kontroli dostępu ZKTeco
- System kontroli dostępu Yale
- System kontroli dostępu Acti
- System kontroli dostępu Techly
- System kontroli dostępu Steren
- System kontroli dostępu Safescan
- System kontroli dostępu Iget
- System kontroli dostępu EverFocus
- System kontroli dostępu Satel
- System kontroli dostępu Provision ISR
- System kontroli dostępu Suprema
- System kontroli dostępu HID Identity
- System kontroli dostępu Indexa
- System kontroli dostępu ONE Smart Control
- System kontroli dostępu Approx
- System kontroli dostępu Gewiss
- System kontroli dostępu SOREX
- System kontroli dostępu Atlantis Land
Najnowsze instrukcje dla System kontroli dostępu
9 Października 2024
8 Października 2024
6 Października 2024
4 Października 2024
4 Października 2024
4 Października 2024
4 Października 2024
4 Października 2024
3 Października 2024
3 Października 2024