Instrukcja obsługi Hikvision DS-K3B530X-M
Hikvision
System kontroli dostępu
DS-K3B530X-M
Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Hikvision DS-K3B530X-M (2 stron) w kategorii System kontroli dostępu. Ta instrukcja była pomocna dla 7 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek
Strona 1/2
DS-K3B530X Series
Swing Barrier
Quick Start Guide
UD30988B-A
©2023 Hangzhou Hikvision Digital Technology Co., Ltd. All rights reserved.
About this Manual
The Manual includes instructions for using and managing the Product. Pictures, charts,
images and all other information hereinafter are for description and explanation only.
The information contained in the Manual is subject to change, without notice, due to
firmware updates or other reasons. Please find the latest version of this Manual at the
Hikvision website (https://www.hikvision.com/).
Please use this Manual with the guidance and assistance of professionals trained in
supporting the Product.
Trademarks
and other Hikvision’s trademarks and logos are the properties of Hikvision in
various jurisdictions.
Other trademarks and logos mentioned are the properties of their respective owners.
Disclaimer
TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, THIS MANUAL AND THE
PRODUCT DESCRIBED, WITH ITS HARDWARE, SOFTWARE AND FIRMWARE, ARE PROVIDED
“AS IS” AND “WITH ALL FAULTS AND ERRORS”. HIKVISION MAKES NO WARRANTIES,
EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION, MERCHANTABILITY,
SATISFACTORY QUALITY, OR FITNESS FOR A PARTICULAR PURPOSE. THE USE OF THE
PRODUCT BY YOU IS AT YOUR OWN RISK. IN NO EVENT WILL HIKVISION BE LIABLE TO YOU
FOR ANY SPECIAL, CONSEQUENTIAL, INCIDENTAL, OR INDIRECT DAMAGES, INCLUDING,
AMONG OTHERS, DAMAGES FOR LOSS OF BUSINESS PROFITS, BUSINESS INTERRUPTION,
OR LOSS OF DATA, CORRUPTION OF SYSTEMS, OR LOSS OF DOCUMENTATION, WHETHER
BASED ON BREACH OF CONTRACT, TORT (INCLUDING NEGLIGENCE), PRODUCT LIABILITY,
OR OTHERWISE, IN CONNECTION WITH THE USE OF THE PRODUCT, EVEN IF HIKVISION
HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES OR LOSS.
YOU ACKNOWLEDGE THAT THE NATURE OF THE INTERNET PROVIDES FOR INHERENT
SECURITY RISKS, AND HIKVISION SHALL NOT TAKE ANY RESPONSIBILITIES FOR ABNORMAL
OPERATION, PRIVACY LEAKAGE OR OTHER DAMAGES RESULTING FROM CYBER-ATTACK,
HACKER ATTACK, VIRUS INFECTION, OR OTHER INTERNET SECURITY RISKS; HOWEVER,
HIKVISION WILL PROVIDE TIMELY TECHNICAL SUPPORT IF REQUIRED.
YOU AGREE TO USE THIS PRODUCT IN COMPLIANCE WITH ALL APPLICABLE LAWS, AND
YOU ARE SOLELY RESPONSIBLE FOR ENSURING THAT YOUR USE CONFORMS TO THE
APPLICABLE LAW. ESPECIALLY, YOU ARE RESPONSIBLE, FOR USING THIS PRODUCT IN A
MANNER THAT DOES NOT INFRINGE ON THE RIGHTS OF THIRD PARTIES, INCLUDING
WITHOUT LIMITATION, RIGHTS OF PUBLICITY, INTELLECTUAL PROPERTY RIGHTS, OR DATA
PROTECTION AND OTHER PRIVACY RIGHTS. YOU SHALL NOT USE THIS PRODUCT FOR ANY
PROHIBITED END-USES, INCLUDING THE DEVELOPMENT OR PRODUCTION OF WEAPONS
OF MASS DESTRUCTION, THE DEVELOPMENT OR PRODUCTION OF CHEMICAL OR
BIOLOGICAL WEAPONS, ANY ACTIVITIES IN THE CONTEXT RELATED TO ANY NUCLEAR
EXPLOSIVE OR UNSAFE NUCLEAR FUEL-CYCLE, OR IN SUPPORT OF HUMAN RIGHTS
ABUSES.
IN THE EVENT OF ANY CONFLICTS BETWEEN THIS MANUAL AND THE APPLICABLE LAW,
THE LATTER PREVAILS.
Data Protection
During the use of device, personal data will be collected, stored and processed. To
protect data, the development of Hikvision devices incorporates privacy by design
principles. For example, for device with facial recognition features, biometrics data is
stored in your device with encryption method; for fingerprint device, only fingerprint
template will be saved, which is impossible to reconstruct a fingerprint image.
As data controller, you are advised to collect, store, process and transfer data in
accordance with the applicable data protection laws and regulations, including without
limitation, conducting security controls to safeguard personal data, such as,
implementing reasonable administrative and physical security controls, conduct periodic
reviews and assessments of the effectiveness of your security controls.
1System Wiring 2Installation
3Wiring
1. Draw a central line on the installation
surface of the left or right pedestal.
2. Draw other parallel lines for installing
the other pedestals.
The distance between the nearest
two lines is L + 272 mm. L represents the
lane width.
3. Slot on the installation surface and dig
installation holes according to the hole
position. Put 4 expansion
bolts of M12*120 for each pedestal.
4. Bury cables. Each lane buries 1 high
voltage cable and 1 low voltage cable. For
details, see the system wiring diagram.
High voltage: AC power input
Low voltage: interconnecting cable
(communication cable and 24 V power cable)
and network communication cable.
The supplied interconnecting power cable
length is 5 m and communication cable length
is 3 m.
The suggested inner diameter of the low
voltage conduit is larger than 30 mm.
If you want to bury both of the AC power cord
and the low voltage cable, the two cables
should be in separated conduits to avoid
interference.
If more peripherals are required to connect,
you should increase the conduit diameter or
bury another conduit for the external cables.
The external AC power cord should be
double-insulated.
The network cable must be CAT5e or the
network cable has better performance.
Steps:
1 1
1
13
3
4
4
2 2
2
2
Steps:
1. Prepare installation tools, check the components, and clean the installation base.
2. Remove 4 screws of each pedestal which fix the 2 side panels.
3. Remove the side panels and place the pedestals to the corresponded positions
according to the entrance and exit marks on the pedestals.
4. Secure each pedestal with 4 nuts and fix the side panels to its original position
with screws.
Make sure the device is installed on flat surface.
Make sure the device is powered off during installation and other operations.
The installation tools are put inside the package of the pedestal.
If the installation area is close to the wall, make
sure the distance between the pedestal and the
wall should be more than 20 mm (60 mm if
with face recognition terminals), or you might
cause damage to the device or cannot open the
pedestal's top panel.
Dimension
Tamper
Interface
Main Lane Control Board
Indicator Board
Interface 1 (For
Authentication
Indicator Board)
Reserved
Fan
Communication
Interface
(For Main Extended
Interface Board, IR
Adapter Board, and
Lane Status
Indicator Board)
Encoder Interface
Power Supply
for Motor
Supercapacitor
Brake Interface Brake Interface
Reserved Reserved
Interconnecting
Interface
(For Sub Lane
Control Board)
Reserved
Access Control
Board Interface
Fire Input
Exit Button
12 VDC Output
24 VDC Input
Reserved
Indicator Board
Interface 1 (For
Authentication
Indicator Board)
Tamper
Interface
Fan
Communication
Interface
（For Sub Extended
Interface Board, IR
Adapter Board, and
Lane Status Indicator
Board）
Encoder Interface
Power Supply for
Motor
Supercapacitor
Reserved
12 VDC Output
(Reserved)
BUS Interface
(For Sub Optional
Board )
Exit Button
24 VDC Input
Interconnecting
Interface
(For Main Lane
Control Board)
Sub Lane Control Board
Access Control Board (Optional)
Reserved
Loudspeaker
Interface
Reserved
Reserved
Network
Interface
SOC Serial Port
Wi-Fi Interface
MCU Serial Port USB
Interface
DIP Switch
Main Lane
Control Board
Interface
Extended
Interface 12 VDC Output
RS-485 Interface
(Entrance)
24 VDC Input
Reset Button
SOC and MCU serial port are for debugging and
maintenance use only.
Hold the reset button for 5 s, the device will
beep for 3 s and start restoring to factory
settings.
The DIP switch is for study mode settings and
keyfob pairing. Refer to the user manual for
details.
RS-485A corresponds to port 5 on web and is
for QR code scanner connection at entrance by
default; RS-485C corresponds to port 7 on web
and is for card reader connection at entrance by
default.
Entrance
Main and Sub Lane
Control Board
Main Lane Control Board
Sub Lane Control Board
Authentication
Indicator Board
Authentication
Indicator Board Authentication
Indicator Board
Power Supply
Power Supply
Access Control Board
(Optional)
Access Control Board
(Optional)
Main Switch
Main Switch
Main Extended
Interface Board
Main Extended
Interface Board
Sub Extended Interface Board
Sub Extended
Interface Board
Card Reader Board
(Optional)
QR Code Scanner
(Optional)
NFC Board
NFC Board
Scan the QR code to view the video guide.
Cable Hole: 181 × 90
L
L + 142
1349
466 181
90
60
130
L + 272
L + 402
Sub Lane Control Board
Sub Extended
Interface Board
Sub Lane IR
Adapter Board
Lane Status
Indicator Board
Lane Status
Indicator Board
Lane Status
Indicator Board
Lane Status
Indicator Board
Lane Status
Indicator Board
Lane Status
Indicator Board
NFC BoardNFC Board
Main Switch Main Switch
Authentication
Indicator Board
Authentication Indicator BoardAuthentication Indicator Board
Sub Extended
Interface Board
Main Lane Control Board
Sub Lane Control Board
Main Lane Control
Board
Access Control Board Access Control Board
Main Extended
Interface Board
Sub Lane IR
Adapter Board
Main Extended Interface Board
Unit: mm
Low Voltage Low Voltage
High Voltage
Entrance
Fix each pedestal with
4 expansion bolts of
M12*120
60 mm
20 mm
Scan the QR code to view the user manual.
Keep glass barriers clean, dry and unblocked, in order not to affect the IR detectors.
The diagram is for reference. Dimensions may differ in models.
Unit: mm
Sub Lane IR
Adapter Board
Sub Lane IR Adapter Board
1396
1000
1500
201.6
700
900650
50
130
142.5
842.5
2225.4
272.2 201.6
Regulatory Information
FCC Information
Please take attention that changes or modification not expressly approved by the party
responsible for compliance could void the user’s authority to operate the equipment.
FCC compliance: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference to
radio communications. However, there is no guarantee that interference will not occur in
a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the following
measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
—Consult the dealer or an experienced radio/TV technician for help.
This equipment should be installed and operated with a minimum distance 20cm between
the radiator and your body.
FCC Conditions
This device complies with part 15 of the FCC Rules. Operation is subject to the following
two conditions:
1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference that may
cause undesired operation.
This product and - if applicable - the supplied accessories too are
marked with "CE" and comply therefore with the applicable
harmonized European standards listed under the RE Directive
2014/53/EU, the EMC Directive 2014/30/EU, the RoHS Directive
2011/65/EU.
2006/66/EC (battery directive): This product contains a battery
that cannot be disposed of as unsorted municipal waste in the
European Union. See the product documentation for specific
battery information. The battery is marked with this symbol, which
may include lettering to indicate cadmium (Cd), lead (Pb), or
mercury (Hg). For proper recycling, return the battery to your
supplier or to a designated collection point. For more information
see: www.recyclethis.info
2012/19/EU (WEEE directive): Products marked with this symbol
cannot be disposed of as unsorted municipal waste in the
European Union. For proper recycling, return this product to your
local supplier upon the purchase of equivalent new equipment, or
dispose of it at designated collection points. For more information
see: www.recyclethis.info
Screen Display
Add 10
(LEFT)
Exit Button Add 1
(RIGHT) CANCEL OK
Configuration data: Configuration data is displayed by two digital tubes
LEFT: Press this button to add ten to configuration data
RIGHT: Press this button to add one configuration data
CANCEL: Return to the level-1 menu, or exit the configuration from the level-1 menu.
OK: Confirm the data, or enter configuration mode, or enter the submenu.
Level-1 Menu: If the decimal point on the right is on, it indicates the level-1 menu. The
number represents the configuration item number.
Level-2 Menu: if the decimal point in the middle is on, it indicates the level -2 menu. The
number represents the parameters of a configuration item.
Parameter Configration Button
Single press to open from the entrance position.
Double press to open from the exit position.
The buttons are on the main lane control board.
Exit Button
Procedure
Warning
In the use of the product, you must be in strict compliance
with the electrical safety regulations of the nation and
region.
Do not connect several devices to one power adapter as
adapter overload may cause over-heat or fire hazard.
If smoke, odors or noise rise from the device, turn off the
power at once and unplug the power cable, and then
please contact the service center.
The socket-outlet shall be installed near the equipment
and shall be easily accessible.
1. Do not ingest battery. Chemical burn hazard!
2. This product contains a coin/button cell battery. If the
coin/button cell battery is swallowed, it can cause severe
internal burns in just 2 hours and can lead to death.
3. Keep new and used batteries away from children.
4. If the battery compartment does not close securely,
stop using the product and keep it away from children.
5. If you think batteries might have been swallowed or
placed inside any part of the body, seek immediate
medical attention.
6. CAUTION: Risk of explosion if the battery is replaced by
an incorrect type.
7. Improper replacement of the battery with an incorrect
type may defeat a safeguard (for example, in the case of
some lithium battery types).
8. Do not dispose of the battery into fire or a hot oven, or
mechanically crush or cut the battery, which may result in
an explosion.
9. Do not leave the battery in an extremely high
temperature surrounding environment, which may result
in an explosion or the leakage of flammable liquid or gas.
10. Do not subject the battery to extremely low air
pressure, which may result in an explosion or the leakage
of flammable liquid or gas.
11. Dispose of used batteries according to the instructions
Caution
Do not drop the device or subject it to physical shock, and
do not expose it to high electromagnetism radiation. Avoid
the equipment installation on vibrations surface or places
subject to shock (ignorance can cause equipment
damage).
Do not place the device in extremely hot (refer to the
specification of the device for the detailed operating
temperature), cold, dusty or damp locations, and do not
expose it to high electromagnetic radiation.
Exposing the equipment to direct sun light, low ventilation
or heat source such as heater or radiator is forbidden
(ignorance can cause fire danger). The device cover for
indoor use shall be kept from rain and moisture.
Exposing the equipment to direct sun light, low ventilation
or heat source such as heater or radiator is forbidden
(ignorance can cause fire danger).
Please use a soft and dry cloth when clean inside and
outside surfaces of the device cover, do not use alkaline
detergents.
Biometric recognition products are not 100% applicable to
anti-spoofing environments. If you require a higher
security level, use multiple authentication modes.
The serial port of the equipment is used for debugging
only.
Wall Mounting: Install the equipment according to the
instructions in this manual. To prevent injury, this
equipment must be securely attached to the floor/wall in
accordance with the installation instructions.
Improper use or replacement of the battery may result in
hazard of explosion. Replace with the same or equivalent
type only. Dispose of used batteries according to the
instructions provided by the battery manufacturer.
This bracket is intended for use only with equipped
devices. Use with other equipment may result in instability
causing injury.
This equipment is for use only with equipped bracket. Use
with other (carts, stands, or carriers) may result in
instability causing injury.
！
！
Safety Instructions
Level-1 Menu
Level-2 Menu
Startup
Display error code
Press to add 1RIGHT
Press to add 10LEFT
Hold for 3 s to enterOK
leval 1 menu
Press to enter level-2OK
menu
Press to add 1RIGHT
Press to add 10LEFT
Press to save theOK
paramter and back to
level-1 menu
Conduct no operation
for 5 s and the screen
displays error code
End
5 6Button Description Quick Start
Enter the configuration mode. The
number of 1 will show up on the
right side of the screen and the
device is ready for configuration.
Press and to set theLEFT RIGHT
configuration No. Press to enterOK
the level-2 menu and view the
parameters. Press , orCANCEL
conduct no operation for 5 s to
cancel configuration.
Press and to set theLEFT RIGHT
parameters at your needs. Press
OK to save the change or press
CANCEL back to configuration No.
setting without saving changes.
Conduct no operations for 5 s to
cancel configuration.
Power Input
100 ~ 240 VAC
4Wiring Diagram
• The power cable from power supply to the main lane control board has been connected. You will need to prepare the 14AWG power cable to connect the AC power input to power supply.
• The supplied 2 interconnecting cables need connecting on-site:
1. 24 V power cable of 14 AWG. The cable is 5 m in length and put inside the right/middle pedestal at the exit.
2. CAT5e Communication cable. The cable is 3 m in length and put inside the package of the right/middle pedestal.
• The ① and ② or ③ and ④ refer to the two sides of a same board.
• Barrier opens at the entrance/exit: connect to BTN1/BTN2 and GND.
• If the optional board is not installed,
the error code of "49" will appear
but the device functions normally.
• Refer to the user manual for botton
description details.
Main Switch Main Switch
Left Middle Right
Main Extended Interface Board
Sub Extended Interface Board
485/232
Terminals
(Exit)
12 VDC
Output
BUS Interface
(For Sub Lane
Control Board)
Wiegand/Exit
Button Interface
5 VDC Output
Communication
Interface (For Sub
Lane Control Board)
Sub-1G Antenna
Reserved
Reserved
Reserved
Reserved
Reserved
Reserved
Barrier Light
Interface
Barrier Light
Interface
Reserved
Loudspeaker
Interface
Wiegand/Exit Button
Interface
Debugging Port
Debugging Port
5 VDC Power Output
Communication
Interface
(For Main Lane
Control Board)
RS-485B corresponds to port 6 on web and is for QR code scanner connection
at exit by default; RS-485D corresponds to port 4 on web and is for card
reader connection at exit by default; RS-232B corresponds to port 2 on web.
Access Control
Board Interface
Card Reader Board
125 K
Antenna
Debugging Port
DIP Switch
Reserved
13.56 M
Antenna
485-
485+
GND
12 VDC
3 4
Sub Extended Interface Board Sub Extended Interface Board
3
24
1
24 V
Interconnecting
Power Cable
24 V
Interconnecting
Power Cable
Interconnecting
Cable
Interconnecting
Cable
2
2
Main Lane
Control Board Main Lane
Control Board 1
2
Access Control
Board
Sub Lane
Control Board Sub Lane
Control Board
Sub Lane
Control Board Main Lane
Control Board Main Lane
Control Board Sub Lane
Control Board
Access Control
Board
Main Extended
Interface Board
Main Extended
Interface Board
Enter the device default IP address (192.0.0.64) and create a new password (admin
password) to activate the device.
Device hotspot is enabled by default. Connectto the devicehotspot and create a new
password (admin password) via mobile browser to activate the device.
Activate device via client software.
The configurations above and the NFC function can be realized only when
the deviceis equipped with access control board.
Android system supporting NFC function is recommended. IOS system is not
supported.
We highly recommend you create a strong password of your own choosing
(using a minimum of 8 characters, including upper case letters, lower case
letters, numbers, and special characters) in order to increase the security of
your product. Characters containing admin and nimda are not supported.
The default hotspot password is device serial number.
If device hotspot is disabled, make sure your mobile phone and the device are connected to
the same network. Place your phone to the NFC area and thelogin page will pop up.
If device hotspot is enabled, place your phone to the NFC area and the name and password
of the device hotspotwill be obtained automatically.
Activation
Make sure the device is activated. Enter the device IP address in the address bar of the
web browser and press Enter to enter the login page.
Enter the device user name and the password. Click Login.
When the device hotpot is enabled, you can connect to the device hotspot and the login
page will pop up.
Enter the device user name and the password. Click Login.
You can configure the turnsile basic parameters, keyfob settings, light settings, network
settings, access control settings and face parameters, etc.
After downloading the client software, you can conduct device management, group
management, person managment and access control management.
Configuration via PC Web
Configuration via Mobile Web
Configuration via Client Software
NFC
Specyfikacje produktu
| Marka: | Hikvision |
| Kategoria: | System kontroli dostępu |
| Model: | DS-K3B530X-M |
Potrzebujesz pomocy?
Jeśli potrzebujesz pomocy z Hikvision DS-K3B530X-M, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą
Instrukcje System kontroli dostępu Hikvision
1 Kwietnia 2025
1 Kwietnia 2025
1 Kwietnia 2025
1 Kwietnia 2025
1 Kwietnia 2025
1 Kwietnia 2025
1 Kwietnia 2025
29 Marca 2025
29 Marca 2025
28 Marca 2025
Instrukcje System kontroli dostępu
- System kontroli dostępu Bosch
- System kontroli dostępu APC
- System kontroli dostępu Honeywell
- System kontroli dostępu Viking
- System kontroli dostępu DSC
- System kontroli dostępu Vimar
- System kontroli dostępu Dahua Technology
- System kontroli dostępu Velleman
- System kontroli dostępu Delta Dore
- System kontroli dostępu Panduit
- System kontroli dostępu Speco Technologies
- System kontroli dostępu Chief
- System kontroli dostępu Assa Abloy
- System kontroli dostępu Axis
- System kontroli dostępu LiftMaster
- System kontroli dostępu Abus
- System kontroli dostępu Marmitek
- System kontroli dostępu Optex
- System kontroli dostępu ZKTeco
- System kontroli dostępu Yale
- System kontroli dostępu EQ-3
- System kontroli dostępu Burg Wächter
- System kontroli dostępu Acti
- System kontroli dostępu Eminent
- System kontroli dostępu Techly
- System kontroli dostępu Steren
- System kontroli dostępu GeoVision
- System kontroli dostępu Safescan
- System kontroli dostępu Iget
- System kontroli dostępu EverFocus
- System kontroli dostępu Satel
- System kontroli dostępu EQ3
- System kontroli dostępu ETiger
- System kontroli dostępu Provision ISR
- System kontroli dostępu Suprema
- System kontroli dostępu HID Identity
- System kontroli dostępu Indexa
- System kontroli dostępu ONE Smart Control
- System kontroli dostępu Approx
- System kontroli dostępu Gewiss
- System kontroli dostępu SOREX
- System kontroli dostępu Atlantis Land
Najnowsze instrukcje dla System kontroli dostępu
27 Marca 2025
20 Lutego 2025
28 Stycznia 2025
27 Stycznia 2025
5 Stycznia 2025
29 Grudnia 2024
22 Grudnia 2024
14 Grudnia 2024
14 Grudnia 2024
14 Grudnia 2024