Instrukcja obsługi Velleman VTDESOL3
Velleman
maszyna do lutowania
VTDESOL3
Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Velleman VTDESOL3 (24 stron) w kategorii maszyna do lutowania. Ta instrukcja była pomocna dla 3 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek
Strona 1/24
VTDESOL3
VACUUM DESOLDERING PUMP WITH HEATER
DESOLDEERPOMP MET VERWARMINGSELEMENT
POMPE À DESSOUDER AVEC ÉLÉMENT CHAUFFANT
BOMBA DESOLDADORA CON CALENTADOR
ENTLÖTPUMPE MIT HEIZKÖRPER
POMPKA ROZLUTOWUJACA Z GRZALKA
BOMBA DESOLDADORA COM AQUECIMENTO
USER MANUAL 2
GEBRUIKERSHANDLEIDING 5
MODE D'EMPLOI 8
MANUAL DEL USUARIO 11
BEDIENUNGSANLEITUNG 14
INSTRUKCJA OBSŁUGI 17
MANUAL DO UTILIZADOR 20
VTDESOL3
V. 05 29/01/2021 2 ©Velleman nv –
USER MANUAL
1. Introduction
To all residents of the European Union
Important environmental information about this product
This symbol on the device or the package indicates that disposal of the device after its lifecycle could
harm the environment. Do not dispose of the unit (or batteries) as unsorted municipal waste; it
should be taken to a specialized company for recycling. This device should be returned to your
distributor or to a local recycling service. Respect the local environmental rules.
If in doubt, contact your local waste disposal authorities.
Thank you for choosing Velleman! Please read the manual thoroughly before bringing this device into service. If
the device was damaged in transit, do not install or use it and contact your dealer.
2. Safety Instructions
This device can be used by children aged from 8 years and above,
and persons with reduced physical, sensory or mental capabilities
or lack of experience and knowledge if they have been given
supervision or instruction concerning the use of the device in a
safe way and understand the hazards involved. Children shall not
play with the device. Cleaning and user maintenance shall not be
made by children without supervision.
Read and understand this manual and all safety signs before
using this appliance.
Indoor use only. Keep this device away from rain, moisture,
splashing and dripping liquids. Never put objects filled with liquids
on top of or close to the device.
Always disconnect mains power when the device is not in use or
when servicing or maintenance activities are performed. Handle
the power cord by the plug only.
Caution! leave the power cord plugged in After switching off,
for a few minutes. When you switch off the unit, the automatic
cooling function blows cooling air through the heater pipe for a
short period. This protects the heater from damage and extends
its lifetime. Do not disconnect the mains plug during this cooling
process.
Do not crimp the power cord and protect it against damage.
Warning! If the power cord is damaged, it must be replaced by
the manufacturer, its service agent, or similarly qualified persons
in order to avoid any hazard.
Make sure that the available voltage does not exceed the voltage
stated in the specifications of this manual.
Plug the power cord into a suitable, mains outlet. earthed
Risk of electroshock when opening the cover. Touching live
wires can cause life-threatening electroshocks. Do not
disassemble or open the housing yourself. Have the device
repaired by qualified personnel.
Do not operate the device with wet hands.
VTDESOL3
V. 05 29/01/2021 3 ©Velleman nv –
Never use the device on live electronic circuits. Make sure power
to the work piece is cut and capacitors are discharged.
Do not use near inflammable products or in explosive
atmospheres. Heat can cause fire to inflammable products even
when they are not in sight. Only use in properly ventilated rooms.
Incorrect use may cause fire.
Do not touch the shafts, tips, or hot air gun as this can cause
serious burns. Keep the tips and hot air away from the body,
clothes, or other flammable material. Do not aim the hot air gun
at the eyes. Use gloves and/or heat-resistant tools to pick up the
PCB assembly to prevent burns. Always return the irons and gun
to their stands between uses; always let the device cool down
after use and before storage.
Place the device on a level, stable, and fire resistant working
surface.
WARNING! - This tool must be placed on its stand when not in
use; do not leave the tool unattended when switched on.
Do not inhale solder fumes. The vapours that are released during
soldering are harmful. Therefore, you shall only use the soldering
station in well-ventilated areas or under an exhaust hood (solder
fume extractor). Dispose of fume filters and solder residue in
accordance with local regulations.
• Use the soldering iron on a heatproof workbench.
• Place the soldering iron in its holder after use.
• Let a hot soldering iron cool down naturally and do not immerse in water.
3. General Guidelines
Refer to the on the last pages of this manual. Velleman® Service and Quality Warranty
• If you are desoldering a printed circuit board: place the board on a flat, dry surface with the component
side face-up. Make sure the board lies perfectly flat. The heat gun can also melt solder on nearby
components you were not planning to remove. If the board is not perfectly flat, these components can get
dislodged from their positions as their solder softens.
• Do not keep the heat gun on and pointed at the components for more than one minute at a time, as the
heat may damage the board and components.
Specyfikacje produktu
| Marka: | Velleman |
| Kategoria: | maszyna do lutowania |
| Model: | VTDESOL3 |
Potrzebujesz pomocy?
Jeśli potrzebujesz pomocy z Velleman VTDESOL3, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą
Instrukcje maszyna do lutowania Velleman
10 Września 2024
6 Września 2024
4 Września 2024
4 Września 2024
3 Września 2024
21 Sierpnia 2024
6 Lipca 2024
8 Maja 2024
Instrukcje maszyna do lutowania
- maszyna do lutowania Milwaukee
- maszyna do lutowania Yato
- maszyna do lutowania Parkside
- maszyna do lutowania Toolcraft
- maszyna do lutowania Nedis
- maszyna do lutowania Einhell
- maszyna do lutowania Silverline
- maszyna do lutowania Denon
- maszyna do lutowania Mercury
- maszyna do lutowania Ozito
- maszyna do lutowania RYOBI
- maszyna do lutowania Ersa
- maszyna do lutowania BaseTech
- maszyna do lutowania Güde
- maszyna do lutowania GYS
- maszyna do lutowania Telwin
- maszyna do lutowania Westfalia
- maszyna do lutowania Weller
- maszyna do lutowania Craftsman
- maszyna do lutowania Ridgid
- maszyna do lutowania PowerPlus
- maszyna do lutowania Powerfix
- maszyna do lutowania Monacor
- maszyna do lutowania Steren
- maszyna do lutowania Truper
- maszyna do lutowania Cigweld
- maszyna do lutowania Holzmann
- maszyna do lutowania Epcom
- maszyna do lutowania Uten
- maszyna do lutowania CFH
- maszyna do lutowania Edsyn
- maszyna do lutowania Mag-Torch
- maszyna do lutowania UNIMIG
- maszyna do lutowania Portasol
- maszyna do lutowania JBC
- maszyna do lutowania Hakko
- maszyna do lutowania Fixpoint
- maszyna do lutowania Stamos
Najnowsze instrukcje dla maszyna do lutowania
15 Października 2024
15 Października 2024
15 Października 2024
15 Października 2024
15 Października 2024
15 Października 2024
15 Października 2024
15 Października 2024
15 Października 2024
15 Października 2024