Instrukcja obsługi TrueLife Care T3

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla TrueLife Care T3 (41 stron) w kategorii termometr. Ta instrukcja była pomocna dla 4 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/41
CARE T3
EN INSTRUCTION MANUAL
DE ANLEITUNG
CS NÁVOD
SK NÁVOD
PL INSTRUKCJA
HU HASZNÁLATI UTATÁS
SL NAVODILA
HR UPUTSTVO
3
Taking a reading:
1. Clean the tip with a damp cloth.
2. Turn on the thermometer by pressing the .power button
3. Three colours (green/orange/red) will ash in sequence on the thermometer, followed by the last reading
taken, the selected mode (orL / udr / rct / bth), then three dashes ( - - - ) and the measurement icon indica-
ting that the thermometer is now ready for use.
4. Place the thermometer in the chosen place the dashes on the display will start to move and the measu-
rement icon in the right corner will begin to ash, indicating that the thermometer has successfully
started taking a reading.
5. The thermometer will complete predictive measurement after approx. 5 seconds, emitting an audible signal
(5 beeps for about 5 seconds) and lighting up the display in the corresponding colour. The measurement icon
will also stop ashing. At this point, it is possible to stop but if you want the temperature reading to be as
accurate as possible, follow the points below.
6. Next the thermometer will start the precision measurement phase.
7. Keep the thermometer in place and wait.
8. After a few minutes (depending on the measurement site), a second, longer audible signal will sound
(10 beeps for about 10 seconds) and the measurement icon will disappear.
9. The display will then show the precise measured value.
10. After taking a reading, turn o the thermometer by pressing the . Alternatively, it will switch power button
itself o after 10 minutes to save battery.
COLOURED BACKLIGHT
The thermometer also indicates the measured temperature using the coloured backlight of the display.
Temperature up to 37.2 °C (98.96 °F) – green backlight (normal body temperature)
Temperature from 37.3 to 37.7 °C (from 99.14 to 99.86 °F) – orange backlight (elevated temperature)
Temperature 37.8 °C (100.04 °F) and above – red light (fever) + audible fever alert
SELECTING THE MEASUREMENT MODE
The thermometer allows you to measure the temperature in three places on the body and the temperature of
water. To achieve the most accurate results, set the thermometer‘s measurement mode for the specic site you
are taking the reading from. To select the mode, proceed as follows:
1. Turn on the thermometer by pressing the .power button
2. When the currently selected mode appears on the display, press and hold the for about 3 sepower button -
conds until the display ashes.
3. Now you can toggle between modes, by pressing the .power button
4. After choosing the mode, simply wait until the display stops ashing and the thermometer will display
3 dashes ( - - - ) and the measurement icon indicating the thermometer is ready to take a reading.
5. Take a temperature reading.
orL – Oral mode – for measuring the temperature from the mouth
udr – Underarm mode – for measuring the temperature from the armpit
rct – Rectal mode – for measuring the temperature from the rectum
bth – Bath mode – for measuring water temperature
MEASUREMENTS IN INDIVIDUAL MODES
1. Oral mode
a. Before using the thermometer, do not eat or drink anything
(especially hot and cold food or drinks) and keep your mouth
closed for 310 minutes before starting the measurement.
b. Place the thermometer in your mouth under your tongue in one
of the two pockets to the left or right of the root of the tongue.
c. Close your mouth and try to breathe evenly through your nose
during the measurement (so that the reading is not aected by
airow).

Specyfikacje produktu

Marka: TrueLife
Kategoria: termometr
Model: Care T3

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z TrueLife Care T3, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje termometr TrueLife

TrueLife

TrueLife Care T3 Instrukcja

27 Września 2024
TrueLife

TrueLife Care Q8 Instrukcja

25 Września 2024
TrueLife

TrueLife Care Q5 Instrukcja

17 Września 2024
TrueLife

TrueLife Care Q7 Instrukcja

9 Września 2024

Instrukcje termometr

Najnowsze instrukcje dla termometr

Auriol

Auriol H14269 Instrukcja

15 Października 2024
Medel

Medel ECOtemp Instrukcja

9 Października 2024
Medel

Medel No Contact Plus Instrukcja

9 Października 2024
Medel

Medel Flexo Instrukcja

9 Października 2024
Owon

Owon TI300 Instrukcja

8 Października 2024
Innoliving

Innoliving INMD-DMT-437 Instrukcja

8 Października 2024