Instrukcja obsługi Suntec Wellness Transform 12000
Suntec Wellness
kontrola klimatu
Transform 12000
Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Suntec Wellness Transform 12000 (13 stron) w kategorii kontrola klimatu. Ta instrukcja była pomocna dla 4 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek
Strona 1/13
Instruction Manual
2
INTRODUCTION / TECHNICAL DATA
Congratulations on purchasing your SUNTEC WELLNESS KLIMATRONIC
®
TRANSFORM unit.
Your air-conditioner has been developed and manufactured in accordance with standards of state of the art
technology.
Please read the operating instructions carefully before connecting your TRANSFORM unit to the power
supply in order to prevent damage from improper use. Pay special attention to the safety instructions. If you
pass this TRANSFORM unit on to a third party, you must also include these operating instructions. Please
keep these operating instructions in a safe place for any questions which may arise in future.
Thank you for showing confidence in our product. We hope you enjoy a pleasant room climate with your
Suntec air-conditioner.
MODEL TRANSFORM
7000 TRANSFORM
9000 TRANSFORM
10500 TRANSFORM
12000 TRANSFORM
14000
VOLT 230V 50Hz AC 230V 50Hz AC 230V 50Hz AC 230V 50Hz AC 230V 50Hz AC
POWER CONSUMPTION (W) 760 W 990 W 1150 W 1340 W 1530 W
(Wb24 /Db35)
POWER CONSUMPTION (W)
COOLING 900 W 1100 W 1280 W 1480 W 1700 W
HEATING
(EN60335)
700 W 950 W 1100 W 1300 W 1500 W
COOLING CAPACITY 2.000 W 2.600 W 3.000 W 3.500 W 4.000 W
HEATING CAPACITY 2.000 W 2.600 W 3.000 W 3.500 W 4.000 W
(Wb24 / Db35)
DEHUMIDIFICATION
CAPACITY
(30, RH80%)
30L/day 50L/day 50L/day 60L/day 70L/day
NOISE 50dB(A) 51 dB(A) 52dB(A) 53dB(A) 54dB(A)
AIR CIRCULATION [m³/h] 360 400 420 450 450
COOLING AGENT R410a R410a R410a R410a R410a
REMOTE CONTROL INCLUSIVE INCLUSIVE INCLUSIVE INCLUSIVE INCLUSIVE
TIME SWITCH 0-24 STD 0-24 STD 0-24 STD 0-24 STD 0-24 STD
DIMENSIONS (mm) WXDXH 300x480x630 300x480x630 300x505x778 300x505x778 300x505x778
NET WEIGHT 24 kg 25 kg 28 kg 29.5 kg 30,5 kg
All figures are approx. data. Characteristics pursuant to current Norm EN 14511. Subject to alterations.
EASY TO OPERATE AND EASY TO MOVE AROUND
The TRANSFORM unit can be moved easily on rollers from room to room.
The air quantity can be adjusted via up to three ventilation levels.
The air flow can be very strong and reach up to 5 or 6 metres.
Installation by a specialist is not required
Simply plug into a normal household socket with an operating voltage of 230V/ 50Hz.
The extract air hose can be stored in the TRANSFORM unit for transport and when not in use.
This Suntec TRANSFORM unit operates in accordance with the heat pump principle. On account of the
special, innovative construction of the TRANSFORM unit, its heating function is extremely efficient
compared to conventional heating units.
SCOPE OF DELIVERY
1 x TRANSFORM unit
1 x remote control
1 x air hose 150 cm
1 x air hose connector
1 x bracket air hose
1 x sir outlet grid
1 x coarse filter top, 1 coarse filter
bottom
1 x activated carbon filter top
1 x operating instructions
1 x drainage hose 50 cm
2 x sealing plug
3
BEFORE INITIATION
1. To avoid damage, place the TRANSFORM unit in an upright position for at least 24 hours
before initiation.
2. Release the holder air hose in the TRANSFORM unit and take out the extract air hose.
3. Fasten the air hose before initiating the TRANSFORM unit.
4. Turn the extract air hose in the direction of the arrow (1) displayed and remove it from the
TRANSFORM unit.
5. Turn the extract air hose in the direction of the arrow (2) displayed and connect it to the
TRANSFORM unit.
6. Plug the power plug into a socket. Never pull the plug out of the socket with force using the
connection line. This can damage the power cable.
7. Since the TRANSFORM unit emits hot air, please observe a sufficient minimum safety
distance to each wall. (Fig. 1)
8. Despite the splash water protection, you should not operate the TRANSFORM unit in moist
areas, such as e.g. swimming baths or similar areas.
9. The colour of the TRANSFORM unit can change slightly due to direct solar radiation.
10. The TRANSFORM unit is equipped with a special thermal deactivation. This protects the unit
from overheating in extreme ambient conditions.
11. Please place the TRANSFORM unit so that the air inlet is not impeded, e.g. by furniture or
curtains, since this can negatively effect the capacity.
12. Do not allow direct sunlight to shine on the TRANSFORM unit, since it may then overheat and
automatically deactivate on account of the thermal deactivation.
Specyfikacje produktu
| Marka: | Suntec Wellness |
| Kategoria: | kontrola klimatu |
| Model: | Transform 12000 |
Potrzebujesz pomocy?
Jeśli potrzebujesz pomocy z Suntec Wellness Transform 12000, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą
Instrukcje kontrola klimatu Suntec Wellness
25 Września 2024
23 Września 2024
20 Września 2024
19 Września 2024
18 Września 2024
17 Września 2024
17 Września 2024
6 Września 2024
3 Września 2024
Instrukcje kontrola klimatu
- kontrola klimatu AEG
- kontrola klimatu Sharp
- kontrola klimatu Nobo
- kontrola klimatu Domo
- kontrola klimatu Truma
- kontrola klimatu OneConcept
- kontrola klimatu Buderus
- kontrola klimatu Redmond
- kontrola klimatu Vaillant
- kontrola klimatu Solac
- kontrola klimatu Livington
- kontrola klimatu Rittal
- kontrola klimatu EXCELLENT Electrics
- kontrola klimatu Stiebel Eltron
- kontrola klimatu Trebs
- kontrola klimatu Magnum
- kontrola klimatu Technoline
- kontrola klimatu Duux
- kontrola klimatu Bulex
- kontrola klimatu Faber
- kontrola klimatu Turmix
- kontrola klimatu Eufab
- kontrola klimatu Simplify
- kontrola klimatu Econo-Heat
- kontrola klimatu Finicompressors
- kontrola klimatu Sawo
- kontrola klimatu Webasto
- kontrola klimatu Mr Safe
Najnowsze instrukcje dla kontrola klimatu
9 Października 2024
3 Października 2024
2 Października 2024
29 Września 2024
29 Września 2024
28 Września 2024
28 Września 2024
28 Września 2024
28 Września 2024
28 Września 2024