Instrukcja obsługi Stihl FS 200

Stihl Podcinacz FS 200

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Stihl FS 200 (114 stron) w kategorii Podcinacz. Ta instrukcja była pomocna dla 8 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/114
Instruction Manual
Manual de instrucciones
Warning!
For safe operation follow all safety
precautions in Instruction Manual - improper
use can cause serious injury.
Advertencia!
Para su seguridad durante el manejo de este
producto, siga siempre las precauciones de
seguridad dadas en el manual de
instrucciones - el uso indebido puede causar
lesiones graves.
STIH)
STIHL FS 120, 200, 250
1FS 120, FS 120 R, FS 200, FS 200 R, FS 250, FS 250 R
English / USA
BA_SE_049_008_01_20.fmPrinted on chlorine-free paper.
Printing inks contain vegetable oils; paper can be recycled.
© ANDREAS STIHL AG & Co. KG, 2007
0458 250 8621 C. M0,5. M7. CP. Printed in USA
STIHl
Contents
Guide to Using this Manual .............. 2
Safety Precautions and
Working Techniques ......................... 3
Approved Combinations of
Cutting Tool, Deflector,
Handle and Harness ....................... 19
Approved Power Tool
Attachments .................................... 21
Mounting the Bike Handle .............. 21
Mounting the Loop Handle ............. 23
Adjusting the Throttle Cable ........... 24
Fitting the Carrying Eye .................. 25
Mounting the Deflector ................... 25
Mounting the Cutting Tools ............. 26
Fuel ................................................ 30
Fueling ............................................ 31
Fitting the Harness ......................... 32
Balancing the Brushcutter .............. 33
Starting / Stopping the Engine ........ 34
Operating Instructions .................... 37
Cleaning the Air Filter ..................... 37
Motor Management ........................ 38
Adjusting the Carburetor ................ 38
Checking the Spark Plug ................ 40
Engine Running Behavior .............. 41
Lubricating the Gearbox ................. 41
Replacing Starter Rope
and Rewind Spring ......................... 42
Storing the Machine ....................... 44
Sharpening
Metal Cutting Tools ......................... 44
Maintenance Chart ......................... 45
Parts and Controls ......................... 47
Specifications ................................. 50
Special Accessories ....................... 51
Maintenance and Repairs .............. 51
STIHL Incorporated
Federal Emission Control
Warranty Statement ........................ 52
STIHL Incorporated Federal
Emission Control
Warranty Statement ........................ 54
Trademarks .................................... 56
Allow only persons who understand this
manual to operate your trimmer/
brushcutter.
To receive maximum performance and
satisfaction from your STIHL trimmer/
brushcutter, it is important that you read
and understand the maintenance and
safety precautions, starting on page 3,
before using your trimmer/brushcutter.
Contact your STIHL dealer or the STIHL
distributor for your area if you do not
understand any of the instructions in this
manual.
!Warning!
Because a trimmer/brushcutter is a high-
speed cutting tool some special safety
precautions must be observed to reduce
the risk of personal injury.
Careless or improper use may cause
serious or even fatal injury. Make sure
your unit is equipped with the proper
deflector, handle and harness for the
type of cutting attachment being used.
Always wear proper eye protection.
STIHL's philosophy is to continually
improve all of its products. As a result,
engineering changes and improve-
ments are made from time to time. If the
operating characteristics or the appear-
ance of your trimmer/brushcutter differs
from those described in this manual,
please contact your STIHL dealer for
information and assistance.
2
English / USA
FS 120, FS 120 R, FS 200, FS 200 R, FS 250, FS 250 R
Pictograms
All the pictograms attached to the
machine are shown and explained in
this manual.
The operating and handling instructions
are supported by illustrations.
Symbols in text
The individual steps or procedures
described in the manual may be marked
in different ways:
:A bullet marks a step or procedure
without direct reference to an
illustration.
A description of a step or procedure that
refers directly to an illustration may
contain item numbers that appear in the
illustration.
Example:
Loosen the screw (1)
Lever (2) ...
In addition to the operating instructions,
this manual may contain paragraphs
that require your special attention. Such
paragraphs are marked with the
symbols described below:
Warning where there is a risk of an
accident or personal injury or
serious damage to property.
Caution where there is a risk of
damaging the machine or its
individual components.
Note or hint which is not essential
for using the machine, but may
improve the operator’s under-
standing of the situation and result
in better use of the machine.
Note or hint on correct procedure in
order to avoid damage to the
environment.
Equipment and features
This instruction manual may refer to
several models with different
features. Components that are not
installed on all models and related
applications are marked with an
asterisk (*). Such components may
be available as special accessories
from your STIHL dealer.
Engineering improvements
STIHL’s philosophy is to continually
improve all of its products. As a result,
engineering changes and improvements
are made from time to time. If the
operating characteristics or the
appearance of your machine differ from
those described in this manual, please
contact your STIHL dealer for
assistance.
Therefore some changes, modifications
and improvements may not be covered
in this manual.
Guide to Using this Manual


Specyfikacje produktu

Marka: Stihl
Kategoria: Podcinacz
Model: FS 200

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Stihl FS 200, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje Podcinacz Stihl

Stihl

Stihl FS 490 C-M Instrukcja

30 Września 2024
Stihl

Stihl FSA 120.0 Instrukcja

24 Września 2024
Stihl

Stihl FSA 120.0 R Instrukcja

24 Września 2024
Stihl

Stihl FSA 80.0 Instrukcja

24 Września 2024
Stihl

Stihl AutoCut 5-2 Instrukcja

19 Września 2024
Stihl

Stihl FixCut 5-2 Instrukcja

19 Września 2024
Stihl

Stihl AutoCut C 5-2 Instrukcja

15 Września 2024
Stihl

Stihl PolyCut 20-3 Instrukcja

14 Września 2024
Stihl

Stihl TrimCut 30-2 Instrukcja

14 Września 2024

Instrukcje Podcinacz

Najnowsze instrukcje dla Podcinacz

Black & Decker

Black & Decker GL570 Instrukcja

15 Października 2024
Husqvarna

Husqvarna 236R Instrukcja

14 Października 2024
RYOBI

RYOBI One+ P20220 Instrukcja

9 Października 2024
Husqvarna

Husqvarna 110iL Instrukcja

9 Października 2024
Toro

Toro 51434 Instrukcja

8 Października 2024
Toro

Toro 51490 Instrukcja

8 Października 2024
Toro

Toro 51494 Instrukcja

8 Października 2024
Toro

Toro 51498T Instrukcja

8 Października 2024
Toro

Toro 51653 Instrukcja

8 Października 2024
Toro

Toro i51020 Instrukcja

8 Października 2024