Instrukcja obsługi StarTech.com PEXUSB3S4V


Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla StarTech.com PEXUSB3S4V (4 stron) w kategorii Karta sieciowa/adapter. Ta instrukcja była pomocna dla 7 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/4
4 Port PCI Express PCIe SuperSpeed USB 3.0 Controller Card Adapter with UASP - SATA Power
StarTech ID: PEXUSB3S4V
The PEXUSB3S4V PCI Express USB 3.0 Card (with SATA Power) adds 4 external USB 3.0 ports to any PCI
Express-enabled computer system with support for data rates up to 5 Gbps, while remaining backward compatible
with USB 2.0 / 1.x devices.
Enhanced with UASP support (USB Attached SCSI Protocol), this USB 3.0 controller performs up to 70% faster
than conventional USB 3.0 when paired with a UASP supported enclosure (Note: UASP requires a compatible
operating system). Using a more efficient protocol than the traditional USB BOT (Bulk-Only Transport), UASP
technology optimizes transfers by allowing multiple commands to be processed simultaneously, significantly
increasing transfer speeds for less wait time on data transfers. See our UASP test results below for further details.
The card uses a "stacked" port layout that places the ports one on top of the other, enabling all four USB 3.0 ports to
be external facing, while still allowing the card to fit into a small form factor/low profile computer system using the
included low profile bracket.
Plus, with a built-in SATA power connector, each USB port can provide up to 900mA of power to devices that draw
power from a host bus connection (500mA for USB 2.0) by connecting to your computer power supply.
Backed by a StarTech.com 2-year warranty and free lifetime technical support.
Improved Performance with UASP
UASP is supported in Windows® 8, Server 2012 and Linux kernel 2.6.3 or later. In testing UASP performed with up
to a 70% faster read / 40% faster write speed over traditional USB 3.0 at peak performance.
At the same peak in testing, UASP also showed up to an 80% reduction in required processor resources.
Test results were obtained using an Intel® Ivy Bridge system, StarTech.com add-on USB 3.0 cards, a UASP-
enabled StarTech.com enclosure, and a SATA III solid state drive.
Applications
Upgrade an older PCIe-based system with USB 3.0 connectivity, to fully utilize USB 3.0 devices
Expand a system's USB capabilities with four additional external USB ports, for connecting additional
external hard drives, CD/DVD drives, MP3 players, printers, scanners, webcams, game controllers, digital
cameras, etc.
Features
4 external USB 3.0 ports in a stacked layout
UASP support for more efficient data transfer
Fully compliant with USB 3.0 revision 1.0 specifications and Intel xHCI rev0.95 specifications
Built-in optional SATA power connector for bus-powered USB devices
Optionally provides up to 900mA per USB port
Backward compatible with USB 2.0 and USB 1.0/1.1 devices
Compliant with PCI Express 2.0 specifications
Includes a Low Profile/half-height installation bracket
Technical Specifications
Warranty 2 Years
Bus Type PCI Express
Card Type Standard Profile (LP bracket incl.)
Chipset ID NEC uPD720201
Interface USB 3.0
Port Style Integrated on Card
Ports 4
Connector
Type(s)
1 - PCI Express x1 Male
External Ports 4 - USB 3.0 A (9 pin; SuperSpeed) Female
Internal Ports 1 - SATA Power (15 pin) Plug
Type and
Rate
USB 3.0 - 5 Gbit/s
UASP
Support
Yes
OS
Compatibility
Windows XP (32/64-bit)/ Server 2003 (32/64-bit)/ Server 2008 R2/ Vista (32/64-bit)/ 7 (32/64-bit)/ 8
(32/64-bit)
Product
Height
2.7 in [68 mm]
Product
Length
3 in [75 mm]
Product
Weight
1.6 oz [45 g]
Product
Width
0.7 in [19 mm]
Humidity 20% ~ 80% RH
Operating
Temperature
5°C to 5C (41°F to 122°F)
Storage
Temperature
-25°C to 70°C (-13°F to 158°F)
System and
Cable
Requirements
Available PCI Express expansion slot
Note The maximum throughput of this card is limited by the bus interface. If used with PCI Express Gen
1.0 enabled computers, the max throughput is 2.5 Gbps. If used with PCI Express Gen 2.0 enabled
computers, the max throughput is 5 Gbps.
Package
Quantity
1
Shipping
(Package)
Weight
0.2 lb [0.1 kg]


Specyfikacje produktu

Marka: StarTech.com
Kategoria: Karta sieciowa/adapter
Model: PEXUSB3S4V

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z StarTech.com PEXUSB3S4V, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje Karta sieciowa/adapter StarTech.com

Instrukcje Karta sieciowa/adapter

Najnowsze instrukcje dla Karta sieciowa/adapter

LevelOne

LevelOne FNC-0109TX Instrukcja

14 Października 2024
APC

APC APVS9602 Instrukcja

9 Października 2024
Edimax

Edimax EW-7822ULC Instrukcja

9 Października 2024
NUVO

NUVO NV-SUBRX Instrukcja

8 Października 2024
NUVO

NUVO NV-SUBTXRX Instrukcja

8 Października 2024
Valcom

Valcom VIP-822 Instrukcja

8 Października 2024
Valcom

Valcom VIP-812 Instrukcja

8 Października 2024