Instrukcja obsługi StarTech.com O1210I-NETWORK-CARD

StarTech.com Karta sieciowa/adapter O1210I-NETWORK-CARD

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla StarTech.com O1210I-NETWORK-CARD (2 stron) w kategorii Karta sieciowa/adapter. Ta instrukcja była pomocna dla 11 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/2

Quick-Start Guide

To view manuals, FAQs, videos, drivers, downloads, technical drawings, and more, visit www.startech.com/support

Manual Revision: September 5, 2024

Product Diagram

O1210I-NETWORK-CARD

Component Function

1Pull Tab • Pull to remove the from the Network Card

OCP NIC 3.0 Slot

2SFP+ Slot x 2

• Connect a orSFP+ Module, Active Optical Cable,

Direct Attach Copper Cable Network Card to the

• Supports 1Gbps and 10Gbps

3Locking Screw • Secure the card to the Host Server Case

44C+ Connector

(OCP NIC 3.0) • Insert into an on the OCP NIC 3.0 Slot Host Server

2-Port OCP 3.0 10G Open SFP+ Network Card - Intel

Package Contents

• Network Card x 1

• Quick-Start Guide x 1

Requirements

For the latest requirements, please visit: www.StarTech.com/O1210I-NETWORK-CARD

• Host server with an available OCP NIC 3.0 Slot

Installation

Install the Server Network Card

WARNING!

Static Electricity can severely damage . Ensure that you are adequately Network Cards

grounded Host Server Case Server Network Card before you open your or touch the .

You should wear an or use an when installing any Anti-Static Strap Anti-Static Mat

computer component. If an isn’t available, discharge any built-up Anti-Static Strap

static electricity by touching a large for several seconds. Only Grounded Metal Surface

handle the by its edges and do not touch the gold connectors.Server Network Card

1. Turn o the and any that are connected to it (e.g. Host Server Peripheral Devices

printers, external hard drives, etc.).

2. Unplug the from the back of the , and disconnect any Power Cable Host Server

Peripheral Devices that are connected.

3. Remove the from the . Consult the documentation that came with Cover Server Case

the for details about doing this safely.Host Server

4. Locate an open and remove the corresponding OCP NIC 3.0 Slot Slot Cover Plate

from the back of the .Host Server

5. Gently insert the into the . Turn the Server Network Card OCP NIC 3.0 Slot Locking

Screw Server Network Card Server Case/Chassisto attach the to the back of the .

6. Return the onto the .Cover Host Server

7. Install one or more , , or SFP/SFP+ Modules Active Optical Cables Direct Attach

Copper Cables SFP+ Slots into the available .

8. Reconnect all of the disconnected in .Peripheral Devices Step 2

9. Reconnect the to the back of the .Power Cable Host Server

10. Turn on the and .Host Server Peripheral Devices

*Product may vary from image

Regulatory Compliance

FCC Compliance Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of

the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential

installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used

in accordance with the instructions, may cause harmful interference to radio communications. However, there is no

guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to

radio or television reception, which can be determined by turning the equipment o and on, the user is encouraged to try

to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment to an outlet on a dierent circuit than the receiver.

• Consult the dealer or an experienced radio/TV technician for help.

Any changes or modications not expressly approved by the party responsible for compliance could void the user’s

authority to operate the device. If shielded interface cables are included with the product, or if additional components or

accessories are designated for use with the installation, they must be used to ensure compliance with FCC regulations.

ISED Statement / Déclaration d’ISDE

CAN ICES-003(B) / NMB-003(B)

This Class B digital apparatus complies with Canadian ICES-003.

This device complies with ISED Canada licence-exempt RSS standard(s). Operation is subject to the following two

conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including

interference that may cause undesired operation of the device.

Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.

Le présent appareil est conforme aux CNR d’ISDE Canada applicables aux appareils radio exempts de licence.

L’exploitation est autorisée aux deux conditions suivantes : (1) l’appareil ne doit pas produire de brouillage, et (2)

l’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d’en compromettre le

fonctionnement.

Limitation of Liability

In no event shall the liability of StarTech.com Ltd. and StarTech.com USA LLP (or their ocers, directors, employees or

agents) for any damages (whether direct or indirect, special, punitive, incidental, consequential, or otherwise), loss of

prots, loss of business, or any pecuniary loss, arising out of or related to the use of the product exceed the actual price

paid for the product. Some states do not allow the exclusion or limitation of incidental or consequential damages. If such

laws apply, the limitations or exclusions contained in this statement may not apply to you.

Warranty Information

This product is backed by a two year warranty.

For further information on product warranty terms and conditions, please refer to .

www.startech.com/warranty

Safety Measures

• Read the entire manual and ensure the instructions are fully understood before assembling and/or using this product.

Mesures de Sécurité

• Lisez tout le manuel et assurez-vous que vous comprenez les instructions avant de commencer à assembler et utiliser

ce produit.

安全対策

• 最初に取扱説明書を最後まで読み、本製品の組み立て方をすべて理解してから組み立て作業を始めて下さい。

Misure di Sicurezza

• Leggere l’intero manuale e assicurarsi di aver compreso tutte le istruzioni prima di iniziare ad assemblare e a utilizzare

questo prodotto.

Säkerhetsåtgärder

• Läs hela manualen och se till att du förstår instruktionerna innan du börjar montera och använda produkten.

Medidas de Seguridad

• Lea todo el manual y asegúrese de haber comprendido bien las instrucciones antes de proceder con el ensamblaje y el

uso de este producto.

FR: startech.com/fr

DE: startech.com/de

ES: startech.com/es

NL: startech.com/nl

IT: startech.com/it

JP: startech.com/jp

StarTech.com Ltd.

45 Artisans Crescent

London, Ontario

N5V 5E9

Canada

StarTech.com Ltd.

Unit B, Pinnacle 15

Gowerton Road

Brackmills,

Northampton

NN4 7BW

United Kingdom

StarTech.com LLP

4490 South Hamilton

Road

Groveport, Ohio

43125

U.S.A.

StarTech.com Ltd.

Siriusdreef 17-27

2132 WT Hoofddorp

The Netherlands

À DÉPOSER

EN MAGASIN À DÉPOSER

EN DÉCHÈTERIE

Cet appareil,

ses accessoires

et piles

se recyclent

Download the Driver

1. Navigate to www.StarTech.com/O1210I-NETWORK-CARD

2. Click the tab.Drivers & Downloads

3. Under , download the .Driver(s) Driver Package

Install the Driver

Windows

1. Right-click the zipped that was downloaded. Click Follow Driver Package Extract All.

the on-screen instructions to extract the les.

Note: Windows usually saves the les to the Downloads folder associated with the user

account (e.g. C:\Users\useraccount\Downloads)

2. Follow the instructions on the accompanying le for further Intel_Windows_DIG

Installation Instructions.

Linux

1. Extract the contents of the . Driver Package

2. Follow the instructions on the accompanying le for further README Installation

Instructions.

Quick-Start Guide

Verify the Driver Installation

Windows

1. Navigate to the .Device Manager

2. Under , right-click Network Adapters Intel(R) Ethernet Network Adapter X710-2

for OCP NIC 3.0 and click the option.Properties

3. Conrm that the is installed and working as expected.Driver

Linux

Note: Ensure Linux kernel 2.6 (LTS) or higher is being used. Execute the following

command from the terminal prompt to check the kernel version, uname -r.

1. Open a and type the command to Terminal Window sudo dmesg | grep Intel

check the Intel Driver Integration.

2. You should see the following response if the drivers are present, Intel Corporation

Ethernet Controller X710 for 10GbE SFP+.

Specyfikacje produktu

Marka:	StarTech.com
Kategoria:	Karta sieciowa/adapter
Model:	O1210I-NETWORK-CARD

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z StarTech.com O1210I-NETWORK-CARD, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą

Twoje imię*

Twój email*

Napisz tutaj swoje pytanie

Instrukcje Karta sieciowa/adapter StarTech.com

StarTech.com 107B-USB-HDMI Instrukcja

14 Stycznia 2025

StarTech.com ST1000SPEXD4T Instrukcja

8 Stycznia 2025

StarTech.com O1210I-NETWORK-CARD Instrukcja

28 Grudnia 2024

StarTech.com ST1000SPEX2T Instrukcja

9 Października 2024

StarTech.com ST1000SPEX2LT Instrukcja

9 Października 2024

StarTech.com AF221CE-POE-INJECTOR Instrukcja

9 Października 2024

StarTech.com USB3LINK Instrukcja

9 Października 2024

StarTech.com PCMACLINK2 Instrukcja

9 Października 2024

StarTech.com PEX1000SFP Instrukcja

9 Października 2024

StarTech.com ST2GPEX Instrukcja

9 Października 2024

Instrukcje Karta sieciowa/adapter

Najnowsze instrukcje dla Karta sieciowa/adapter

ZyXEL WBE510D Instrukcja

14 Stycznia 2025

Edimax EU-4307 V2 Instrukcja

29 Grudnia 2024

Micro Connect MC-POEADAPTER-USB-C Instrukcja

27 Grudnia 2024

Lindy 43237 Instrukcja

27 Grudnia 2024

Lindy 43247 Instrukcja

27 Grudnia 2024

Akasa AK-PCCE25-01 Instrukcja

26 Grudnia 2024

OpenVox AE2410E40 Instrukcja

26 Grudnia 2024

Asus EBG15 Instrukcja

18 Grudnia 2024

SMK-Link VP6494 Instrukcja

17 Grudnia 2024

SMK-Link VP6493 Instrukcja

17 Grudnia 2024