Instrukcja obsługi Soundcore Liberty 2 Pro

Soundcore Zatyczka do uszu Liberty 2 Pro

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Soundcore Liberty 2 Pro (79 stron) w kategorii Zatyczka do uszu. Ta instrukcja była pomocna dla 5 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/79
English 01
Čeština 07
Dansk 13
Deutsch 19
ελληνικά 25
Español 31
Suomi 37
Français 43
Magyar 49
Italiano 55
Nederlands 61
Norsk 67
Język polski 73
Português 79
Pусский 85
Slovenský Jazyk 91
Slovenski Jezik 97
Svenska 103
Türkçe 109
日本語 115
฀฀฀ 121
简体中文 127
繁體中文 133
Portugues do Brasil 139
ﺔﻳ
ِب
َرَﻊﻟ 145
תי ִרב 151
01 EN EN 02
Charging
• Slide to open or close the charging case to activate the LED battery indicator.
• Fully charge both the earbuds and the charging case before the ฀rst-time using.
• To preserve battery lifespan, fully charge at least once every 45 days.
• To prevent damage, use the provided USB-C cable.
• You can charge the charging case by using a certi฀ed wireless charger (not provided).
• Fully dry off the earbuds and the USB port before charging.
< 30%
30% - 70%
> 70%
100%
Powering On/Off
Slide to open the charging case, the earbuds will automatically power on.
Place the earbuds back into the charging case and close the case, the earbuds will
automatically power off.
2
1
OFF
ON
LED behavior (Earbuds)
ON Steady white for 1 second
OFF Steady red for 1 second
• To manually power on, press and hold the multi-function button on either one of earbuds
for 1 second.
• To manually power off, press and hold the multi-function button on either one of earbuds
for 5 seconds.
Pairing
True Wireless Stereo Connection
Slide to open the charging case, the earbuds will automatically power on. The right earbud will
automatically connect with the left earbud.
LED behavior (Earbuds)
Breathing white TWS connecting
Steady white for 1 second TWS connected
• When powered off, press and hold the multi-function button on both earbuds for 1
second, the earbuds will enter TWS connecting mode.
• When powered on and connected, place either one of the earbuds into the charging case
and close the case, you can keep using the other one.
• When powered on and connected, if either one of the earbuds is out of battery and
powered off, you can keep using the other one.
• When you are on a call, place either one of the earbuds into the charging case, the
microphone in the other earbud will be activated.
Bluetooth Pairing with your Device
The earbuds will enter pairing mode when powered on. You are requested to confirm the
connection when you see a pop-up.
2
13
Soundcore
Liberty 2 Pro
Soundcore
Liberty 2 Pro Bluetooth Pairing Request
“Headset” would like
to pair with your Phone
Cancel Pair
Pair
LED behavior (Earbuds)
Flashing white Bluetooth pairing
Steady white for 1 second Bluetooth connected
• In the pairing process, some devices are incompatible with Qualcomm True Wireless
Primary-Secondary dual pairing names, it may notice “connection unsuccessful” when you
tap “Pair” or even no screen popped up. Don’t worry and it will not in฀uence the using.
• Once successfully paired, the primary earbud connects with your device and transfers
signal to the secondary earbud, the latter one will not connect with your device. As a
result, in the Bluetooth pairing list on your device, it may indicate that only one side is
connected while the other side is not.
03 EN EN 04
To pair with another Bluetooth device, place the earbuds back into the charging case and
make sure they are being charged, keep the case cover open, then press and hold the button
on the charging case for 3 seconds. The LED indicator on the right earbud will ฀ash rapidly.
3
Bluetooth Pairing Request
“Headset” would like
to pair with your Phone
Cancel Pair
Pair
Soundcore
Liberty 2 Pro
Soundcore
Liberty 2 Pro
3”
R
1 2
• Each time you power on your Soundcore earphones, it will automatically connect to your
last successfully connected device if available within the Bluetooth range.
• Mono mode: When Bluetooth connected, you can use either one of the earbuds only by
putting the other one back into the charging case and closing the cover.
Wearing
1. Choose the ear tips and ear wings that ฀t your ears the best.
2. Insert the earbuds into the inner canal of your ears.
3. Turn and ฀nd the most comfortable position.
12 3
Controls
All of the controls in stereo mode can be customized in the Soundcore App.
Play / Pause
L/R
1 Press (R/L)
Next track
R
2 Press twice (R)
Previous track
L
2 Press twice (L)
Volume up / down
• The volume up / down controls can be customized in
Soundcore App
• Control volume via the connected device
Answer / End a call
L/R
1Press (R/L)
Reject a call
L/R
1” Press and hold for 1 second (R/L)
Activate Siri or other voice
assistant software
L/R
Voice Assistant
1” Press and hold for 1 second (R/L)

Specyfikacje produktu

Marka: Soundcore
Kategoria: Zatyczka do uszu
Model: Liberty 2 Pro

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Soundcore Liberty 2 Pro, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje Zatyczka do uszu Soundcore

Soundcore

Soundcore Sleep A20 Instrukcja

9 Października 2024
Soundcore

Soundcore Liberty 2 Pro Instrukcja

26 Sierpnia 2024

Instrukcje Zatyczka do uszu

Najnowsze instrukcje dla Zatyczka do uszu

SilverCrest

SilverCrest SKG 16 A1 Instrukcja

12 Października 2024
Maxell

Maxell Dual Driver Instrukcja

9 Października 2024
SBS

SBS Mood Instrukcja

9 Października 2024
SBS

SBS Go Pods Instrukcja

9 Października 2024
Vorago

Vorago ESB-305 Instrukcja

9 Października 2024
Vorago

Vorago EP-104 Instrukcja

9 Października 2024
VXi

VXi Reveal Pro Office Instrukcja

9 Października 2024
VXi

VXi BlueParrott Reveal Instrukcja

9 Października 2024
VXi

VXi V200 Instrukcja

9 Października 2024
VXi

VXi V175 Instrukcja

9 Października 2024