Instrukcja obsługi Shark Detect Pro RV2820AE

Shark Odkurzacz robota Detect Pro RV2820AE

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Shark Detect Pro RV2820AE (17 stron) w kategorii Odkurzacz robota. Ta instrukcja była pomocna dla 6 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/17
Robot Vacuum
RV2820AE
OWNER’S GUIDE
S E L F - E M P T Y R O B O T
TM
s h a r k c l e a n . c o m
WARNING
To reduce the risk of fire, electric shock, injury, or property damage:
LASER WARNING
THIS PRODUCT HAS A CLASS 1 LASER. IT IS SAFE UNDER REASONABLY FORESEEABLE
CONDITIONS (AS DEFINED IN THESE INSTRUCTIONS.) ALWAYS TURN OFF THE POWER
BEFORE LIFTING THE ROBOTIC VACUUM CLEANER OR PERFORMING ANY MAINTENANCE
ON IT. DO NOT LOOK DIRECTLY INTO LASER.
IMPORTANT SAFETY INSTRUCTIONS
PLEASE READ CAREFULLY BEFORE USE • FOR HOUSEHOLD USE ONLY
If the charging cable plug does not fit fully into the outlet, reverse the plug. If it still does not fit,
contact a qualified electrician. DO NOT force into outlet or try to modify to fit.
GENERAL WARNINGS
1. For best performance and coverage,
remove cords from areas that need to be
cleaned.
2. Do not operate the robotic vacuum
cleaner in a room where an infant or child
is sleeping.
3. Do not operate the robotic vacuum
cleaner in an area where there are lit
candles or fragile objects on the floor to
be cleaned.
4. Do not operate the robotic vacuum
cleaner in a room that has lit candles on
furniture that the robotic vacuum cleaner
may accidentally hit or bump into.
5. Do not allow children to sit on the robotic
vacuum cleaner.
6. Do not use the robot on a wet surface,
unless it is a WD model mopping robot.
When using an electrical appliance, basic
precautions should always be followed,
including the following:
7. The robotic vacuum cleaner system
consists of a robotic vacuum and a
Self-Empty Base with a power supply.
These components contain electrical
connections, electrical wiring, and moving
parts that potentially present risk to the
user.
8. Before each use, carefully inspect all parts
for any damage. If a part is damaged,
discontinue use.
9. Use only identical replacement parts.
10. This robotic vacuum cleaner contains no
serviceable parts.
11. Use only as described in this Owner's
Guide. DO NOT use the robotic vacuum
cleaner for any purpose other than those
described in this Owner's Guide.
12. With the exception of filters, DO NOT
expose any parts of the robotic vacuum
cleaner to water or other liquids.
13. DO NOT put hands into any
opening in the Self-Empty Base
or robot.
USE WARNINGS
14. For your robot’s cli sensors to work
properly, all runners, rugs, or carpets must
be eight inches from any stairs (or must
be continuous and extend over the edge
of the stairs). If a runner, rug, or carpet
edge that is less than eight inches from
the stairs cannot be moved, you must use
a digital no-go zone to block o the stairs.
For non-app users, use a boundary to
block o an unsafe boundary.
15. To minimize the risk of the robotic vacuum
cleaner traveling beyond an unsafe
boundary (stair/cli edges, fireplaces,
water hazards), establish these areas as
no-go zones using the mapping feature in
the SharkClean® mobile app. Upon setting
the boundary, run the vacuum and visually
confirm that the settings eectively
prevent it from passing beyond the set
boundary. Adjust settings as necessary.
16. This product has a Class 1 Laser. It is safe
under reasonably foreseeable conditions
(as defined in this Owner's Guide). Always
turn o the power before lifting the
robotic vacuum cleaner or performing any
maintenance on it.
17. DO NOT look directly into laser.
18. Always turn o the robotic vacuum
cleaner before inserting or removing the
filter or dust bin.
19. DO NOT handle plug, Self-Empty Base,
charging cable, or robotic vacuum
cleaner with wet hands. Cleaning and user
maintenance shall not be made by children
without supervision.
20. DO NOT use without robot dust bin and
filters in place.
21. DO NOT damage the cord:
a) DO NOT pull or carry Self-Empty Base
by the cord or use the cord as a handle.
b) DO NOT unplug by pulling on cord.
Grasp the plug, not the cord.
c) DO NOT close a door on the cord, pull
the cord around sharp corners, or leave
the cord near heated surfaces.
22. DO NOT put any objects into nozzle or
s h a r k c l e a n . c o m
GETTING TO KNOW YOUR SHARK DETECT PRO™
DOCK Button CLEAN Button
LIDAR Module
Front Bumper
Indicator Lights
Cli Sensors
Charging Contact
Battery Door
Brushroll
Drive Wheel
Side Brush
Robot Dust Bin and Filter
Front Caster Wheel
Brushroll Door
GETTING TO KNOW YO

Specyfikacje produktu

Marka: Shark
Kategoria: Odkurzacz robota
Model: Detect Pro RV2820AE

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Shark Detect Pro RV2820AE, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje Odkurzacz robota Shark

Shark

Shark Detect Pro RV2820AE Instrukcja

2 Października 2024
Shark

Shark IQ Robot RV1001AE Instrukcja

8 Września 2024
Shark

Shark EZ Robot RV912S Instrukcja

4 Lipca 2024

Instrukcje Odkurzacz robota

Najnowsze instrukcje dla Odkurzacz robota

IRobot

IRobot Roomba 770 Instrukcja

14 Października 2024
Grundig

Grundig VCR 2330 Instrukcja

14 Października 2024
Princess

Princess Deluxe 339000 Instrukcja

10 Października 2024
Electrolux

Electrolux UltimateHome 700 EFR71222DS Instrukcja

9 Października 2024
Cecotec

Cecotec Conga 7490 Ultimate Home X-Treme Instrukcja

9 Października 2024
Cecotec

Cecotec Conga Connected Gyro Instrukcja

9 Października 2024
Koblenz

Koblenz Gamma PRO DE R-950 Instrukcja

9 Października 2024
Koblenz

Koblenz Gamma DE R-601 Instrukcja

9 Października 2024
IRobot

IRobot Roomba Combo 5 Instrukcja

9 Października 2024
Roborock

Roborock Qrevo Plus Instrukcja

9 Października 2024