Instrukcja obsługi Severin AS 3948

Severin maszyna do cięcia AS 3948

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Severin AS 3948 (4 stron) w kategorii maszyna do cięcia. Ta instrukcja była pomocna dla 6 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/4
6
7
8
9
10
11
12
13
1
2
3
4
5
Dear Customer,
Before using the appliance, the user should
read the following instructions carefully.
Familiarisation
1. Rating label (on underside of the unit)
2. Push switch
3. Release button
4. Slide lock for base plate
5. Power cord
6. Stainless steel blade
7. Blade mounting
8. Base plate
9. End-piece holder with finger guard
10. Sliding tray (foldable)
11. Stop plate
12. Thickness selection knob
13. Collection tray
Connection to the mains supply
Make sure that the supply voltage
corresponds with the voltage marked on the
rating label. This product complies with all
binding CE labelling directives.
Important safety instructions
●Before the appliance is used, the main
body as well as any attachment fitted
should be checked thoroughly for any
defects. Should the appliance, for
instance, have been dropped onto a hard
surface, it must not be used any longer:
even invisible damage may have adverse
effects on the operational safety of the
appliance.
●This appliance is not intended for use by
any person (including children) with
reduced physical, sensory or mental
capabilities, or lacking experience and
knowledge, unless they have been given
supervision or instruction concerning the
use of the appliance by a person
responsible for their safety.
●Children should be supervised to ensure
that they do not play with the appliance.
●Do not allow the slicer to come into
contact with open flames or any hot
surface such as hotplates.
●Do not operate the slicer if
- the unit or its power cord show any
signs of damage,
- the appliance has been dropped on to a
hard surface, perhaps causing internal
damage,
- the sliding tray, stop plate or base plate
have not been correctly fitted.
●For safety reasons, always bring the stop
plate back to its rest (zero) position after
use, so that it is flush with the blade.
●We strongly recommend that the
appliance is only used with the sliding
tray and end-piece holder properly
installed and in position. Exceptions may
be made only if required by the size or
shape of the food to be sliced.
●Always remove the plug from the wall
socket
-after use,
-in case of any malfunction,
-during cleaning of the appliance.
●Do not allow the power cord to come
into contact with the blade. When
removing the plug from the wall socket,
never pull on the power cord.
●This appliance is intended for domestic
use only and not for commercial
applications.
●No responsibility is accepted if damage
results from improper use, or if these
instructions are not complied with.
●In order to comply with safety
regulations and to avoid hazards, repairs
of electrical appliances must be carried
out by qualified personnel, including the
replacement of the power cord. If repairs
are needed, please send the appliance to
one of our customer service departments.
The address can be found in the
appendix to this manual.
4
Multi-use slicer
Operation
Applications
The slicer is designed for use with bread,
cold cuts, ham, cheese, cold roasts and other
foodstuffs suitable for slicing.
Short-term operation
The appliance has been designed for short-
term operation only, i.e. the slicer should not
be operated continuously for more than 10
minutes. Switch it off afterwards and allow
the motor to cool down before switching on
again.
Positioning the slicer
The slicer must be positioned on a flat, solid
surface.
Locking the base plate
Fold the base plate into its horizontal
operating position, and then lock it by
pushing the slide lock as far as possible in the
direction of the hinge.
To unlock, slide the lock away from the
hinge.
Fitting the sliding tray
Hold the sliding tray vertically next to the
base plate in such a way that the guide rail
on the tray is located underneath the base
plate. Pull the tray sideways and upwards so
that the rail slips into the guide track
underneath the base plate, and then fold the
tray 90° upwards to lock it into the track.
The tray will now be securely fitted in the
base plate track.
Setting thickness
The thickness of the slices is infinitely
adjustable by means of the selection knob.
Always bring the stop plate back to its rest
(zero) position after use.
Safety switch
To activate the motor, first press the release
button, then the push switch, which will lock
in the operating position. As soon as the
switch is pressed again, the motor will
automatically stop.
Slicing
Following the above safety instructions, the
slicer can now be operated.
-
Adjust the desired thickness of the slices.
-
Position the collection tray underneath
the unit.
-
Use the right hand to place the food to
be sliced on to the sliding tray and to
press it against the stop plate.
-
Fit the end piece holder, with the studded
side facing the blade, on to the tray.
-
Use the left hand to press the release
button and, almost simultaneously, the
push switch, and then move the sliding
tray against the rotating blade. At the
same time, press the end piece holder
containing the food lightly against the
blade.
-
The end piece holder ensures the food
will be held safely while slicing takes
place.
-
The cut slices are collected in the tray
underneath the unit.
●For safety reasons, always bring the stop
plate back to its rest (zero) position after
use so that it is flush with the blade.
Practical hints
-
When cutting a loaf of bread where the
crust is thicker or harder on the top, it
should be placed against the blade in
such a way that the firm part of the crust
faces the cutting edge.
-
When cutting cheese, or when cutting
very thin slices of other foods, use a
slightly moist cloth to wipe the blade first.
This will make the slicing process easier.
-
When cutting ham, ensure that the fatty
side is facing upwards.
General cleaning and care
General
●Always remove the plug from the wall
socket before detaching any accessories,
5

Specyfikacje produktu

Marka: Severin
Kategoria: maszyna do cięcia
Model: AS 3948

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Severin AS 3948, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje maszyna do cięcia Severin

Severin

Severin AS 3914 Instrukcja

9 Października 2024
Severin

Severin AS 3953 Instrukcja

5 Września 2024
Severin

Severin AS 3915 Instrukcja

22 Sierpnia 2024
Severin

Severin AS 3948 Instrukcja

18 Sierpnia 2024
Severin

Severin AS 3950 Instrukcja

13 Sierpnia 2024
Severin

Severin 910038 Instrukcja

8 Sierpnia 2024
Severin

Severin AS 3947 Instrukcja

13 Maja 2024
Severin

Severin AS 9622 Instrukcja

8 Maja 2024
Severin

Severin KM 3864 Instrukcja

5 Maja 2024

Instrukcje maszyna do cięcia

Najnowsze instrukcje dla maszyna do cięcia

Genius

Genius Nicer Dicer Quick Instrukcja

11 Stycznia 2025
Eldom

Eldom Sliss KR350 Instrukcja

11 Stycznia 2025
RGV

RGV Desy AF 220 AM Instrukcja

10 Stycznia 2025
RGV

RGV Desy AF 275 F Instrukcja

10 Stycznia 2025
Royal Catering

Royal Catering RCKS-3 Instrukcja

10 Stycznia 2025
Royal Catering

Royal Catering RCKS-2 Instrukcja

10 Stycznia 2025
Ovela

Ovela OVSAFSLCERA Instrukcja

5 Stycznia 2025
Royal Catering

Royal Catering RCAM-250 Instrukcja

3 Stycznia 2025
Royal Catering

Royal Catering RCES-215/12 Instrukcja

31 Grudnia 2025
CaterChef

CaterChef 537150 Instrukcja

31 Grudnia 2025