Instrukcja obsługi Maruyama M42BK-QC

Maruyama maszyna do cięcia M42BK-QC

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Maruyama M42BK-QC (80 stron) w kategorii maszyna do cięcia. Ta instrukcja była pomocna dla 5 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/80

T h e P O W E R i n O u t d o o r P o w e r

Completely read and understand this manual PRIOR to using this product.

Lea y entienda este manual a fondo, ANTES de usar este producto.

Lisez complèment et comprenez ce manuel AVANT d'utiliser ce produit.

Multi-Cutter

Power Unit/Grupo Motor/Bloc Moteur

M42BK-QC

OWNER'S/OPERATOR'S MANUAL

MANUAL DEL PROPIETARIO U OPERADOR

MANUEL DU PROPRIETAIRE/DE L'UTILISATEUR

— US-1 —

Limited Warranty Statement

All Maruyama commercial/ industrial products are warranted to the original purchaser to be free from defects

in material and workmanship for the time periods listed as follows:from the date of purchase

Lifetime for solid steel driveshaft and ignition coils.

5 years for qualified IRON 5-YR™ commercial, institutional, or industrial use.

1 year 2 years for residential or for commercial use with competitor’s oil.

90 days for rental use.

Engine - Refer to engine manufacturer’s warranty statement. Only Maruyama engines are

covered by this limited warranty statement.

Any part of a Maruyama product found to be defective within the applicable warranty period shall, at

Maruyama's option, be repaired or replaced without charge. Warranty consideration is obtained by delivering

any Maruyama product believed to be defective to an Authorized Maruyama Servicing Dealer within the

applicable warranty period.

The purchaser shall not be charged for diagnostic labor that leads to the determination that a warranted

part is defective, if the diagnostic work is performed at a Maruyama Dealer.

Any warranted part which is not scheduled for replacement as required maintenance, or which is scheduled

only for regular inspection to the effect of “repair or replace as necessary” shall be warranted for the warranty

period. Any warranted part, which is scheduled for replacement as, required maintenance shall be warranted

for the period of time up to the first scheduled replacement point for that part. Maruyama Mfg. Co., Inc. is

liable for damages to other engine components caused by the failure of a warranted part still under warranty.

The purchaser is responsible for the performance of the required maintenance, as defined by Maruyama Mfg.

Co., Inc. in the Owner's/Operator's Manual.

EMISSION-RELATED PARTS WARRANTY: In addition to the above warranty coverage, Maruyama Mfg.

Co., Inc. will repair or replace, free of charge, for the original purchaser and each subsequent purchaser

any emission-related part or parts found to be defective in material and workmanship for two (2) years from

original retail delivery date. Emission-related parts are the carburetor assembly, the ignition coil

assembly, the ignition rotor, the spark plug, the catalytic converter and the fuel tank. Any replace-

ment part that is equivalent in performance and durability may be used in non-warranty maintenance or

repairs, and shall not reduce the warranty obligations of Maruyama Mfg. Co., Inc.

— US-2 —

This warranty does not cover the following:

1. Maintenance items (excluding defects in materials and workmanship) including hoses, spark plugs,

starter rope, air and fuel filters, clutch shoes, vibration isolators, throttle cables and all cutting attach-

ments, etc.

2. Extra expenses including shipping and handling, travel, payment for lost time or pay and for any incon -

venience and storage.

3. Alterations or modifications including aftermarket parts not authorized by Maruyama U.S., Inc.

4. Wear, accident, abuse, neglect, misuse, negligence, improper fuels, lubricants, fuel mixtures (when

applicable), or failure to operate or maintain the product in accordance with instructions approved by

Maruyama.

Repair or replacement as provided under this warranty is the exclusive remedy of the consumer. Maruyama

shall not be liable for any incidental or consequential damages for breach of any express or implied warranty

on these products except to the extent prohibited by applicable law. Any implied warranty of merchantability or

fitness for a particular purpose on these products is limited in duration to the warranty period as defined in the

limited warranty statement. Maruyama reserves the rights to change or improve the design of the product

without notice and does not assume obligation to update previously manufactured products.

This warranty provides you with specific legal rights, which may vary from state to state.

It is the Owner's and Dealer's responsibility to make sure the Warranty Registration Card is properly filled out

and mailed to Maruyama U.S., Inc. Proof of purchase and registration will be required in order to obtain war -

ranty service.

To locate an Authorized Maruyama Servicing Dealer nearest you, contact:.

Maruyama U.S., Inc.

4770 Mercantile Drive, suite100,

Fort Worth, TX

76137

U.S.A.

(940)383-7400

maruyama@maruyama-us.com

www.maruyama-us.com

Specyfikacje produktu

Marka:	Maruyama
Kategoria:	maszyna do cięcia
Model:	M42BK-QC

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Maruyama M42BK-QC, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą

Twoje imię*

Twój email*

Napisz tutaj swoje pytanie

Instrukcje maszyna do cięcia Maruyama

Maruyama M42BK-QC Instrukcja

13 Lutego 2025

Maruyama MC-LB Instrukcja

8 Października 2024

Maruyama M270QC Instrukcja

7 Października 2024

Instrukcje maszyna do cięcia

Najnowsze instrukcje dla maszyna do cięcia

Logan 350-1 Instrukcja

27 Marca 2025

Logan Artist Elite 450-1 Instrukcja

27 Marca 2025

Weston 01-0008-W Instrukcja

18 Lutego 2025

Royal Catering RCAM-220PRO Instrukcja

9 Lutego 2025

Graef Concept 25 Instrukcja

8 Lutego 2025

Graef SKS 850 Instrukcja

1 Lutego 2025

Royal Catering RCGT-1 Instrukcja

31 Stycznia 2025

Genius Nicer Dicer Quick Instrukcja

11 Stycznia 2025

Eldom Sliss KR350 Instrukcja

11 Stycznia 2025

RGV Desy AF 220 AM Instrukcja

10 Stycznia 2025