Instrukcja obsługi RYOBI RHT1851R15

RYOBI nożyce do żywopłotu RHT1851R15

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla RYOBI RHT1851R15 (20 stron) w kategorii nożyce do żywopłotu. Ta instrukcja była pomocna dla 5 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/20
RHT1851R15
RHT1855R40
OHT1855R
OHT1851R
ORIGINAL INSTRUCTIONS
Cordless Hedge
Trimmer
RHT1855R40
RHT1851R25
RHT1851R20
RHT1851R15
OHT1855R
OHT1851R
Important!
It is essential that you read the instructions in this manual before assembling,
operating, and maintaining the product.
Subject to technical modification.
1
Safety, performance, and dependability have been given
top priority in the design of your cordless hedge trimmer.
INTENDED USE
The cordless hedge trimmer is only intended for use
outdoors. For safety reasons, the product must be
adequately controlled by using two-handed operation.
The product is designed for home or domestic use. It is
intended to cut and trim hedges, shrubs, and similar
vegetation.
It should be used in dry and well-illuminated conditions.
It is not intended to cut grass, trees, or branches. It should
not be used for any other purpose than hedge trimming.
GENERAL POWER TOOL SAFETY WARNINGS
WARNING
Read all safety warnings and all instructions. Failure
to follow the warnings and instructions may result
in electric shock, fire, and/or serious injury. Save all
warnings and instruction for future reference.
The term “power tool” in the warnings refers to your mains-
operated (corded) power tool or battery-operated (cordless)
power tool.
WORK AREA SAFETY
■ Keep work area clean and well lit. Cluttered or dark
areas invite accidents.
■ Do not operate power tools in explosive
atmospheres, such as in the presence of flammable
liquids, gases or dust. Power tools create sparks
which may ignite the dust or fumes.
■ Keep children and bystanders away while operating
a power tool. Distractions can cause you to lose control.
ELECTRICAL SAFETY
■ Power tool plugs must match the outlet. Never
modify the plug in any way. Do not use any adapter
plugs with earthed (grounded) power tools.
Unmodified plugs and matching outlets will reduce risk
of electric shock.
■ Avoid body contact with earthed or grounded
surfaces, such as pipes, radiators, ranges and
refrigerators. There is an increased risk of electric
shock if your body is earthed or grounded
■ Do not expose power tools to rain or wet conditions.
Water entering a power tool will increase the risk of
electric shock.
■ Do not abuse the cord. Never use the cord for
carrying, pulling or unplugging the power tool.
Keep cord away from heat, oil, sharp edges or
moving parts. Damaged or entangled cords increase
the risk of electric shock.
■ When operating a power tool outdoors, use an
extension cord suitable for outdoor use. Use of a
cord suitable for outdoor use reduces the risk of electric
shock.
■ If operating a power tool in a damp location is
unavoidable, use a residual current device (RCD)
protected supply. Use of an RCD reduces the risk of
electric shock.
PERSONAL SAFETY
■ Stay alert, watch what you are doing and use
common sense when operating a power tool. Do
not use a power tool while you are tired or under the
influence of drugs, alcohol or medication. A moment
of inattention while operating power tools may result in
serious personal injury.
■ Use personal protective equipment. Always wear
eye protection. Protective equipment such as dust
mask, non-skid safety shoes, hard hat, or hearing
protection used for appropriate conditions will reduce
personal injury.
■ Prevent unintentional starting. Ensure the switch
is in the off-position before connecting to power
source and/or battery pack, picking up or carrying
the tool. Carrying power tools with your finger on the
switch or energising power tools that have the switch
on invites accidents.
■ Remove any adjusting key or wrench before turning
the power tool on. A wrench or a key left attached to
a rotating part of the power tool may result in personal
injury.
■ Do not overreach. Keep proper footing and balance
at all times. This enables better control of the power in
unexpected situations.
■ Dress properly. Do not wear loose clothing or
jewellery. Keep your hair, clothing and gloves away
from moving parts. Loose clothes, jewellery or long
hair can be caught in moving parts.
■ If devices are provided for the connection of dust
extraction and collection facilities, ensure these are
connected and properly used. Use of dust collection
can reduce dust-related hazards.
POWER TOOL USE AND CARE
■ Do not force the power tool. Use the correct power
tool for your application. The correct power tool will
do the job better and safer at the rate for which it was
designed.
■ Do not use the power tool if the switch does not turn
it on and off. Any power tool that cannot be controlled
with switch is dangerous and must be repaired.
■ Disconnect the plug from the power source and/or
the battery pack from the power tool before making
any adjustments, changing accessories, or storing
power tools. Such preventive safety measures reduce
the risk of starting the power tool accidentally.
■ Store idle power tools out of the reach of children
and do not allow persons unfamiliar with the power
tool or these instructions to operate the power tool.
Power tools are dangerous in the hands of untrained
users.
■ Maintain power tools. Check for misalignment or
binding of moving parts, breakage of parts and any
other condition that may affect the power tool’s
operation. If damaged, have the power tool repaired

Specyfikacje produktu

Marka: RYOBI
Kategoria: nożyce do żywopłotu
Model: RHT1851R15

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z RYOBI RHT1851R15, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje nożyce do żywopłotu RYOBI

RYOBI

RYOBI P2908 Instrukcja

8 Października 2024
RYOBI

RYOBI ACSS01 Instrukcja

8 Października 2024
RYOBI

RYOBI RHT5045 Instrukcja

4 Października 2024
RYOBI

RYOBI R18PHT120 Instrukcja

2 Października 2024
RYOBI

RYOBI ONE+ OGS1820 Instrukcja

29 Września 2024
RYOBI

RYOBI RHT1851R15 Instrukcja

16 Sierpnia 2024
RYOBI

RYOBI RHT6260RL Instrukcja

10 Lipca 2024
RYOBI

RYOBI RY24610 Instrukcja

10 Lipca 2024
RYOBI

RYOBI ZRP2603 Instrukcja

10 Lipca 2024
RYOBI

RYOBI RY24602A Instrukcja

10 Lipca 2024

Instrukcje nożyce do żywopłotu

Najnowsze instrukcje dla nożyce do żywopłotu

Kibani

Kibani WPET1206 - XXL Instrukcja

15 Października 2024
Tanaka

Tanaka THT-2000SB Instrukcja

15 Października 2024
Black & Decker

Black & Decker BHT518 Instrukcja

14 Października 2024
MacAllister

MacAllister MHTP24EB Instrukcja

13 Października 2024
Husqvarna

Husqvarna 226HS99S Instrukcja

12 Października 2024
Husqvarna

Husqvarna 122HD60 Instrukcja

11 Października 2024
Florabest

Florabest FHT 600 B2 Instrukcja

11 Października 2024
Ozito

Ozito PXCGSS-018 Instrukcja

10 Października 2024
Einhell

Einhell Royal HEC 551 Instrukcja

9 Października 2024
Dolmar

Dolmar HT-2460 Instrukcja

9 Października 2024