Instrukcja obsługi RYOBI R18PHT120

RYOBI nożyce do żywopłotu R18PHT120

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla RYOBI R18PHT120 (20 stron) w kategorii nożyce do żywopłotu. Ta instrukcja była pomocna dla 4 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/20

R18PHT120

R18PHTA20

Original Instructions

IMPORTANT!

It is essential that you read the instructions in this manual

before assembling, operating, and maintaining the

product.

Subject to technical modication.

Safety, performance, and dependability have been given top

priority in the design of your cordless pole hedge trimmer

and pole hedge trimmer attachment.

INTENDED USE

The cordless pole hedge trimmer is intended only for

outdoor use in dry and well-illuminated conditions.

The pole hedge trimmer attachment is approved for use with

the battery-driven telescopic pole R18EZRP0.

It is intended to be used only by adults who have read and

understood the instructions and warnings in this manual

and relevant telescopic pole manual and can be considered

responsible for their actions.

The product is designed for home or domestic use. The

product is intended to cut and trim hedges, shrubs, and

similar vegetation. The product is not intended for cutting

hedges, shrubs, and similar vegetation with diameters

greater than its cutting capacity.

The product is designed to be extended to a maximum

length of 3.1 m (for assembling with battery-driven telescopic

poles). Do not exceed this working length.

Do not use the product for any other purpose.

WARNING! The attachment is not suitable for use with

telescopic poles equipped with a bike handle.

GENERAL PRODUCT SAFETY WARNINGS

WARNING! Read all safety warnings, instructions,

illustrations and specifications provided with this

power tool. Failure to follow all instructions listed below

may result in electric shock, re, and/or serious injury.

Save all warnings and instruction for future reference.

The term “power tool” in the warnings refers to your mains-

operated (corded) product or battery-operated (cordless)

product.

WORK AREA SAFETY

■Keep work area clean and well lit. Cluttered or dark

areas invite accidents.

■Do not operate power tools in explosive

atmospheres, such as in the presence of flammable

liquids, gases or dust. Power tools create sparks

which may ignite the dust or fumes.

■Keep children and bystanders away while operating

a power tool. Distractions can cause you to lose control.

ELECTRICAL SAFETY

■Power tool plugs must match the outlet. Never

modify the plug in any way. Do not use any adapter

plugs with earthed (grounded) power tools.

Unmodified plugs and matching outlets will reduce risk

of electric shock.

■Avoid body contact with earthed or grounded

surfaces, such as pipes, radiators, ranges and

refrigerators. There is an increased risk of electric

shock if your body is earthed or grounded.

■Do not expose power tools to rain or wet conditions.

Water entering a power tool will increase the risk of

electric shock.

■Do not abuse the cord. Never use the cord for

carrying, pulling or unplugging the power tool. Keep

cord away from heat, oil, sharp edges or moving

parts. Damaged or entangled cords increase the risk of

electric shock.

■When operating a power tool outdoors, use an

extension cord suitable for outdoor use. Use of a

cord suitable for outdoor use reduces the risk of electric

shock.

■If operating a power tool in a damp location is

unavoidable, use a residual current device (RCD)

protected supply. Use of an RCD reduces the risk of

electric shock.

PERSONAL SAFETY

■Stay alert, watch what you are doing and use

common sense when operating a power tool. Do not

use a power tool while you are tired or under the

influence of drugs, alcohol or medication. A moment

of inattention while operating power tools may result in

serious personal injury.

■Use personal protective equipment. Always wear

eye protection. Protective equipment such as a dust

mask, non-skid safety shoes, hard hat or hearing

protection used for appropriate conditions will reduce

personal injuries.

■Prevent unintentional starting. Ensure the switch

is in the off-position before connecting to power

source and/or battery pack, picking up or carrying

the tool. Carrying power tools with your finger on the

switch or energising power tools that have the switch on

invites accidents.

■Remove any adjusting key or wrench before turning

the power tool on. A wrench or a key left attached to

a rotating part of the power tool may result in personal

injury.

■Do not overreach. Keep proper footing and balance

at all times. This enables better control of the power tool

in unexpected situations.

■Dress properly. Do not wear loose clothing or

jewellery. Keep your hair and clothing away from

moving parts. Loose clothes, jewellery or long hair can

be caught in moving parts.

■If devices are provided for the connection of dust

extraction and collection facilities, ensure these are

connected and properly used. Use of dust collection

can reduce dust-related hazards.

■Do not let familiarity gained from frequent use of

tools allow you to become complacent and ignore

tool safety principles. A careless action can cause

severe injury within a fraction of a second.

POWER TOOL USE AND CARE

■Do not force the power tool. Use the correct power

tool for your application. The correct power tool will

do the job better and safer at the rate for which it was

designed.

■Do not use the power tool if the switch does not turn

it on and off. Any power tool that cannot be controlled

with switch is dangerous and must be repaired.

Original Instructions

■Disconnect the plug from the power source and/

or remove the battery pack, if detachable, from

the power tool before making any adjustments,

changing accessories, or storing power tools. Such

preventive safety measures reduce the risk of starting

the power tool accidentally.

■Store idle power tools out of the reach of children

and do not allow persons unfamiliar with the power

tool or these instructions to operate the power tool.

Power tools are dangerous in the hands of untrained

users.

■Maintain power tools and accessories. Check for

misalignment or binding of moving parts, breakage

of parts and any other condition that may affect the

power tool’s operation. If damaged, have the power

tool repaired before use. Many accidents are caused

by poorly maintained power tools.

■Keep cutting tools sharp and clean. Properly

maintained cutting tools with sharp cutting edges are

less likely to bind and are easier to control.

■Use the power tool, accessories and tool bits etc.

in accordance with these instructions, taking into

account the working conditions and the work to

be performed. Use of the power tool for operations

different from those intended could result in a hazardous

situation.

■Keep handles and grasping surfaces dry, clean

and free from oil and grease. Slippery handles and

grasping surfaces do not allow for safe handling and

control of the tool in unexpected situations.

BATTERY TOOL USE AND CARE

■Recharge only with the charger specified by the

manufacturer. A charger that is suitable for one type

of battery pack may create a risk of fire when used with

another battery pack.

■Use power tools only with specifically designated

battery packs. Use of any other battery packs may

create a risk of injury and fire.

■When battery pack is not in use, keep it away from

other metal objects, like paper clips, coins, keys,

nails, screws or other small metal objects, that can

make a connection from one terminal to another.

Shorting the battery terminals together may cause burns

or a fire.

■Under abusive conditions, liquid may be ejected from

the battery; avoid contact. If contact accidentally

occurs, flush with water. If liquid contacts eyes,

additionally seek medical help. Liquid ejected from

the battery may cause irritation or burns.

■Do not use a battery pack or tool that is damaged or

modified. Damaged or modified batteries may exhibit

unpredictable behaviour resulting in fire, explosion or

risk of injury.

■Do not expose a battery pack or tool to fire or

excessive temperature. Exposure to fire or temperature

above 130°C may cause explosion.

■Follow all charging instructions and do not charge

the battery pack or tool outside the temperature

range specified in the instructions. Charging

improperly or at temperatures outside the specified

range may damage the battery and increase the risk of

fire.

SERVICE

■Have your power tool serviced by a qualified repair

person using only identical replacement parts. This

will ensure that the safety of the power tool is maintained.

■Never service damaged battery packs. Service

of battery packs should only be performed by the

manufacturer or authorized service providers.

POLE HEDGE TRIMMER SAFETY WARNINGS

■Keep all parts of the body away from the blade. Do

not remove cut material or hold material to be cut

when blades are moving. Blades continue to move

after the switch is turned off. A moment of inattention

while operating the hedge trimmer may result in serious

personal injury.

■Carry the hedge trimmer by the handle with the

blade stopped and taking care not to operate any

power switch. Proper carrying of the hedge trimmer will

decrease the risk of inadvertent starting and resultant

personal injury from the blades.

■When transporting or storing the hedge trimmer,

always fit the blade cover. Proper handling of the

hedge trimmer will decrease the risk of personal injury

from the blades.

■When clearing jammed material or servicing the unit,

make sure all power switches are off and the battery

pack is removed or disconnected. Unexpected

actuation of the hedge trimmer while clearing jammed

material or servicing may result in serious personal

injury.

■Hold the hedge trimmer by insulated gripping

surfaces only, because the blade may contact

hidden wiring. Blades contacting a “live” wire may

make exposed metal parts of the hedge trimmer “live”

and could give the operator an electric shock.

■Keep all power cords and cables away from cutting

area. Power cords or cables may be hidden in hedges or

bushes and can be accidentally cut by the blade.

■Do not use the hedge trimmer in bad weather

conditions, especially when there is a risk of

lightning. This decreases the risk of being struck by

lightning.

■To reduce the risk of electrocution, never use the

extended-reach hedge trimmer near any electrical

power lines. Contact with or use near power lines may

cause serious injury or electric shock resulting in death.

■Always use two hands when operating the extended-

reach hedge trimmer. Hold the extended-reach hedge

trimmer with both hands to avoid loss of control.

■Always use head protection when operating the

extended-reach hedge trimmer overhead. Falling

debris can result in serious personal injury.

ADDITIONAL SAFETY WARNINGS

■Some regions have regulations that restrict the use of

the product to some operations. Check with your local

authority for advice. Read all instructions.

■Check the hedges and bushes for foreign objects, such

as wire fences and hidden wiring.

■While operating the product, always hold it firmly with

both hands by the two handles.

■Use the product only at ground level and not on any

other unstable support.

Specyfikacje produktu

Marka:	RYOBI
Kategoria:	nożyce do żywopłotu
Model:	R18PHT120

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z RYOBI R18PHT120, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą

Twoje imię*

Twój email*

Napisz tutaj swoje pytanie

Instrukcje nożyce do żywopłotu RYOBI

RYOBI P2908 Instrukcja

8 Października 2024

RYOBI ACSS01 Instrukcja

8 Października 2024

RYOBI RHT5045 Instrukcja

4 Października 2024

RYOBI R18PHT120 Instrukcja

2 Października 2024

RYOBI ONE+ OGS1820 Instrukcja

29 Września 2024

RYOBI RHT1851R15 Instrukcja

16 Sierpnia 2024

RYOBI RHT6260RL Instrukcja

10 Lipca 2024

RYOBI RY24610 Instrukcja

10 Lipca 2024

RYOBI ZRP2603 Instrukcja

10 Lipca 2024

RYOBI RY24602A Instrukcja

10 Lipca 2024

Instrukcje nożyce do żywopłotu

Najnowsze instrukcje dla nożyce do żywopłotu

Kibani WPET1206 - XXL Instrukcja

15 Października 2024

Tanaka THT-2000SB Instrukcja

15 Października 2024

Black & Decker BHT518 Instrukcja

14 Października 2024

MacAllister MHTP24EB Instrukcja

13 Października 2024

Husqvarna 226HS99S Instrukcja

12 Października 2024

Husqvarna 122HD60 Instrukcja

11 Października 2024

Florabest FHT 600 B2 Instrukcja

11 Października 2024

Ozito PXCGSS-018 Instrukcja

10 Października 2024

Einhell Royal HEC 551 Instrukcja

9 Października 2024

Dolmar HT-2460 Instrukcja

9 Października 2024