Instrukcja obsługi Remington Smooth & Silky WDF4821US

Remington Golarka Smooth & Silky WDF4821US

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Remington Smooth & Silky WDF4821US (2 stron) w kategorii Golarka. Ta instrukcja była pomocna dla 5 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/2
smooth silky
IMPORTANT SAFETY
INSTRUCTIONS
READ ALL
INSTRUCTIONS
BEFORE USING.
When using electrical appliances, basic precautions should always be observed,
including the following. Read all instructions before using this appliance.
WARNING
To reduce the risk of burns, fire,
electric shock or injury to persons:
This appliance is for household
use only.
Close supervision is necessary
when this appliance is used by, on,
or near children or persons with
certain disabilities.
Use this appliance only for its
intended use as described in this
manual. Do not use attachments
not recommended by manufacturer.
Keep the cord away from heated
surfaces.
Never operate this appliance if
it has a damaged cord or plug, if
it is not working properly, if it has
been dropped or damaged, or if it
has been dropped into water.
Do not use outdoors or operate
where aerosol (spray) products are
being used or where oxygen
is being administered.
Unplug from adaptor before
plugging or unplugging appliance.
Do not store it in temperatures
exceeding 140°F (60°C).
Do not plug or unplug this appliance
when your hands are wet.
Do not wrap the cord around the
appliance.
Always attach the plug to the
appliance, then to the outlet. To
disconnect, turn all controls to
OFF, then remove plug from outlet.
Detach removable power cords
from appliances for storage.
Never drop or insert any object
into any of the appliances openings.
The power unit is intended to be
correctly oriented in a vertical or
floor mount position.
Do not use this appliance with
a damaged or broken heads or
cutters, as injury may occur.
DANGER
To reduce the risk of electric shock:
Do not place or store this appliance
where it can fall or be pulled into a
tub or sink.
Except when charging, always
unplug this appliance from the
electrical outlet immediately
after using.
Unplug this appliance before
cleaning it.
Do not use an extension cord
or a voltage converter with this
appliance.
Do not use while bathing or in the
shower if it is plugged in.
SAVE THESE INSTRUCTIONS
Thank you for choosing REMINGTON
®. Our products are designed to meet the
highest standard of quality, functionality and design. The model you have chosen
can be used in or out of the shower and is designed to provide a gentle, close
shave. Please read the instructions for use carefully and keep in a safe place for
future reference.
CAUTION
Use this appliance only for its intended use as described in this manual.
Do not use this product if it is not working correctly, if it has been dropped or
damaged, or submerged in water.
DESCRIPTION
GETTING READY
Please be patient when first using
your shaver, as with any new product,
it may take a little while to familiarize
yourself with the device. If you take
the time to acquaint yourself with
your shaver, we are confident you will
receive years of enjoyable use and
complete satisfaction.
INSTRUCTIONS FOR CHARGING
Always ensure that your hands,
trimmer and power adaptor are dry
before charging.
Before using your REMINGTON®
shaver for the first time, charge
for 24 hours. For subsequent uses,
charge four hours before use. One
full charge allows 30 mins. of cord-
less usage time.
Use product until the battery is low.
This is indicated by the shaver run-
ning distinctly slower.
Your shaver cannot be overcharged,
however, if the product is not going to
be used for an extended time period
(2-3 months), unplug it from the
outlet and store. Fully recharge your
shaver when you would like to use
it again.
To preserve the life of your batteries,
let them run out every six months
then recharge for 20 hours.
CHARGING CAUTIONS
Do not attach the power adaptor to
the outlet with wet hands.
Always charge the shaver in a cool,
dry place.
Do not charge the shaver in close
proximity to water.
Product Features
H.
G.
I.
A. Shaving head
B. Head release button
C. Flexible outer foil
D. Massaging strip
E. Flexible trimmer
F. On/Off switch
G. Bikini trimmer headguard
H. Cleaning brush
I. Power adaptor
A.
C.
B.
E.
D.
F.
WDF4821US
Use and Care
Guide
This shaver is a wet shaver which
may be used in a bath or shower.
How To Use
Your shaver is suitable for legs, under-
arms and the bikini area. It can be
used dry or in the shower.
FOR EVERYDAY SHAVING
1. Remove protective cap.
2. Turn the shaver on.
3. Hold the shaver at a right angle
to your skin and move the shaver
against the direction of the hair
growth.
4. After shaving, turn shaver off.
NOTE: Before dry shaving, make sure
that the area is clean, dry and free
from creams or oil.
If you have not shaved for a while, use
the flexible trimmer before shaving. This
will help you achieve a more effective
shaving result.
1. Turn shaver on.
2. Hold the shaver with the trimmer
facing your leg and slightly tilted
towards you (approximately at a
45º angle).
3. Move the trimmer slowly against the
direction of the hair growth.
4. After shaving, turn off shaver.
TRIMMING AND SHAPING
1. Attach the bikini trimmer headguard.
2. Turn the shaver on.
3. Hold the shaver at a right angle
to your skin and press down gently.
4. Edge and shape the area as desired.
5. After shaving, turn off shaver.
FOR BEST SHAVING PERFORMANCE
We recommend that you use your new
shaver daily for two or three weeks to
allow time to find the optimum shaving
methods for your particular type of hair
growth patterns.
CAUTION
If your skin is easily irritated by shav-
ing, or you suffer from skin allergies,
you should test a section of your arm
or leg before using the shaver.
NOTE:
The shaver IS suitable for use in the
bath or shower.
Do not rinse with water hotter than
160ºF.
Do not completely submerge the
shaver in water.
Register Your New Product Today!
By registering your new Remington
® product, you will receive special offers.
Register online at: RemingtonProducts.com
Cleaning and Maintenance
CARE FOR YOUR SHAVER
To ensure long lasting performance of
your shaver, clean the head assembly
regularly. The easiest and the most
hygienic way to clean the shaver is by
rinsing the shaving head after use with
warm water. Always keep the protec-
tive headguard on the shaving head
when the shaver is not in use.
AFTER EACH USE
1. Ensure the shaver is turned off.
2. Press the release buttons to open
the shaver head.
3. Blow on the foil to remove any
loose debris.
4. Brush or rinse the accumulated
hair from the main body of the
shaver, shaving head and cutter
assembly.
5. Leave the head assembly open to
let the shaver dry completely.
6. Return the shaving head to its
original position and snap in place.
NOTE:
Ensure that the shaver is turned off
when cleaning.
Do not clean the shaving foil with
the brush.
At regular intervals, put a drop of
sewing machine oil onto the foil,
trimmers and cutters head for
continued performance.
REPLACING THE FOIL & CUTTERS
Signs that your foil and cutters need
replacing:
Irritation: As the foil gets worn, you
may experience skin irritation.
Pulling: As the cutters wear, your
shave may not feel as close and
you may feel your cutter pulling on
your hair.
Wear: You may notice that the
cutters have worn through the foil.
To ensure the continued highest quality
performance from your shaver, we
recommend that foil and cutters are
replaced every 6 months.
NOTE: The replacement part for your
shaver model is SPW-WDF48.
Two easy ways to order!
1. U.S. Residents call
800-392-6544
2. Order Online at
RemingtonProducts.com
Product Disposal
When your rechargeable shaver
reaches the end of its useful life,
the batteries must be removed from
the shaver and recycled or disposed
of properly in accordance with your
state and local requirements.
How to Remove the Batteries
from the WDF4821US
(See diagrams to right)
1. Remove screw from bottom of shaver.
2. Separate top and bottom housings.
3. Unscrew and remove inner frame.
4. Open the inner housing and remove
the batteries.
5. Insulate battery ends by (1) placing
each battery individually into
separate plastic bags or (2) covering
the terminals of each battery
completely with plastic or non-
conductive electrical tape.
screw
screws
TO REPLACE THE FOIL
1. Ensure the shaver is switched off.
2. Gently push the small plastic tabs
at either end of the foil carrier.
The foil carrier should then easily
detach from the shaving head.
3. To reassemble, snap the new foil
carrier into position.
4. Attach the shaving head.
CAUTION
Only hold the plastic to prevent
damage to the foil.
Do not press on the foil when
replacing.
TO REPLACE THE CUTTERS
1. Ensure the shaver is switched
off and open the shaving head.
(as above)
2. To remove cutter, grasp cutter
between thumb and forefinger and
pull upward.
3. To reassemble cutter, place cut-
ter onto oscillator tip. Gently push
down clicking into position.
Visit RemingtonProducts.com
for FAQ, tips and more
100-240VAC, 50/60Hz TYPE: F02A
Questions or comments: Call 800-736-4648 in the U.S.
and Canada. Or visit RemingtonProducts.com
Dist. by: Spectrum Brands, Inc., Middleton, WI 53562
Dist. by: Spectrum Brands Canada Inc.
255 Longside Drive, Unit 101
Mississauga, ON L5W 1L8
® Registered Trademark of Spectrum Brands, Inc.
© 2018 Spectrum Brands, Inc. 7/18 22904
Made in China
T22-7000555-A
Contains a listed adaptor.
Spectrum Brands, Inc. Money-back Offer
If within 30 days after you have purchased your Remington
® branded product, you
are not satisfied and would like a refund, return it with the sales receipt indicating
purchase price and date of purchase to the retailer from whom it was purchased.
Spectrum Brands, Inc. will reimburse all retailers who accept the product within 30
days from the date of purchase. If you have any questions concerning the money-back
guarantee, please call 800-736-4648 in the U.S. and Canada.
Remington Guarantees Satisfaction After 30 Days!
Remington 60-Day Money Back Guarantee*
If within 60 days after purchasing any Remington
® product, you are not
completely satisfied and would like a refund, return it with the original dated
sales receipt directly to Remington and receive a full refund.** For questions
concerning the money-back guarantee, please call 800-736-4648 in the U.S.
and Canada.
*Applies to U.S. and Canadian customers’ returns only.
**Terms and conditions apply.
1. Refund will be in the form of a check issued in U.S. Dollars and will be provided
only if all Terms and Conditions are met.
2. The following items must be returned to Remingto and postmarked no later n
than 60 days after purchase of the Remington
® product:
a. The Remington® product;
b. The original sales receipt indicating price and date purchased; and
c. The completed 60-day money back guarantee form located at
RemingtonProducts.com/60day.
3. In addition, Remington, in its discretion, must determine that the returned
product was used in accordance with the instruction booklet (included with the
product at the time of purchase).
4. Returns should be mailed prepaid (no collect returns accepted) to:
Remington 60-Day MBG
507 Stokely Drive, Box 1
DeForest, WI 53532
5. Refund does not include postage costs for the return of the product, but will
include applicable taxes paid by customer, if any.
6. No responsibility will be accepted for late, lost, stolen, misdirected or damaged
product.
7. Please allow 4 6 weeks to receive your refund by check.
Limited Two-Year Warranty
Spectrum Brands, Inc. warrants this product against any defects that are due
to faulty material or workmanship for a two-year period from the original date
of consumer purchase. This warranty does not include damage to the product
resulting from accident or misuse.
If the product should become defective within the warranty period, we will
replace it free of charge. Return your product and sales receipt with your name,
address and day time phone number to: Remington Returns Center, 507 Stokely
Dr., P.O. Box 1, Deforest, WI 53532. For more information call 800-736-4648 in
the U.S. and Canada.
KEEP ORIGINAL SALES RECEIPT AS PROOF OF PURCHASE FOR WARRANTY PURPOSES.
This warranty does not cover products damaged by the following:
Accident, misuse, abuse or alteration of the product
Servicing by unauthorized persons
Use with unauthorized accessories
Connecting it to incorrect current and voltage
Wrapping cord around appliance causing premature wear and breakage
Any other conditions beyond our control
No responsibility, obligations, or liability is assumed for the installation or mainte-
nance of this product.
SPECTRUM BRANDS, INC. SHALL NOT BE RESPONSIBLE FOR ANY INCIDENTAL,
SPECIAL OR CONSEQUENTIAL DAMAGES RESULTING FROM THE USE OF THIS
PRODUCT. ALL IMPLIED WARRANTIES, INCLUDING BUT NOT LIMITED TO
IM PLIED WARRANTIES OF FITNESS AND MERCHANTABILITY, ARE LIMITED IN
DURATION TO TWO YEARS FROM DATE OF ORIGINAL PURCHASE.
This warranty gives you specific legal rights and you may also have other rights
which vary from state to state or province to province. Some states do not allow
the exclusion or limitation of incidental, special or consequential damages.
Warranty
new foil
tabs

Specyfikacje produktu

Marka: Remington
Kategoria: Golarka
Model: Smooth & Silky WDF4821US

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Remington Smooth & Silky WDF4821US, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje Golarka Remington

Instrukcje Golarka

Najnowsze instrukcje dla Golarka

Philips

Philips S3550 Instrukcja

12 Października 2024
Ufesa

Ufesa Metal AR3050 Instrukcja

9 Października 2024
Conair

Conair Girlbomb NPGBS03 Instrukcja

8 Października 2024
Conair

Conair LWD1RN Instrukcja

8 Października 2024
Eldom

Eldom G47U Instrukcja

8 Października 2024
Panasonic

Panasonic ES-PV3A-K Instrukcja

7 Października 2024