Instrukcja obsługi Remington PF7500C
Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Remington PF7500C (2 stron) w kategorii Golarka. Ta instrukcja była pomocna dla 2 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek
Strona 1/2
PF7400, PF7500, PF7600
Use and Care Guide
When using an electrical appliance,
basic precautions should always be
observed, including the following.
Read all instructions before using
this shaver.
DANGER
To reduce the risk of electric shock:
Do not reach for an appliance that
has fallen into water. Unplug it
immediately.
Do not use a plugged in appliance
while bathing or in the shower.
Do not place or drop into water or
other liquid.
Do not place or store this appliance
where it can fall or be pulled into a
tub or sink.
Except when charging, always
unplug this appliance from the
electrical outlet immediately after
using.
Use only when the shaver is in dry
condition. Model PF7600 may be
used in the shower.
Detach the appliance from the
power supply cord before cleaning.
Do not submerge in water.
WARNING
To reduce the risk of burns, fire,
electric shock, or injury to persons:
An appliance should never be left
unattended when it’s plugged
in, except when charging a
rechargeable appliance.
Close supervision is necessary
when this appliance is used by,
on, or near children, or individuals
with special needs or certain
disabilities.
Use this appliance only for its
intended use as described in this
manual. Do not use attachments
not recommended by the
manufacturer.
Never operate this appliance if it
has a damaged cord or plug or if
it is not working properly, if it has
been dropped or damaged, or if it
has been dropped into water.
Keep the cord away from heated
surfaces.
Never drop or insert any object into
any of the appliance’s openings.
Household use only.
IMPORTANT SAFETY
INSTRUCTIONS
Do not use outdoors or operate
where aerosol (spray) products
are being used or where oxygen is
being administered.
Always attach the plug to the
appliance, then to outlet. To
disconnect, turn all controls to OFF,
then remove plug from outlet.
Always pull on cord plug to unplug
from wall socket. Never pull on
electric cord.
Do not plug or unplug this appliance
when your hands are wet.
Do not use an extension cord
or a voltage converter with this
appliance.
Do not wrap the cord around the
appliance.
SAVE THESE INSTRUCTIONS
Always store this appliance and
cord in a moisture-free area.
Do not store it in temperatures
exceeding 140°F (60°C).
Detach removable power cords
from appliance for storage.
Do not use this appliance with
a damaged or broken head or
cutters, as facial injury may occur.
Shavers, including the trimmer, are
for use on facial hair only. They
should not be used for shaving the
hair on your head or any other part
of your body.
Product Features
Shaver Parts
1. On/Off button
2. Foils
3. Cutter assembly
4. Intercept trimmer
5. Hairpocket
6. Power port
7. Pop-up trimmer
8. Stubble comb/Head guard
9. Power adapter
10. Cleaning brush
1
2
7
8
10
9
3
4
About Your Shaver
Intercept Trimmer - trims longer hairs so
they can easily enter foils to shave close.
Pivot - Shaver head pivots to adjust to any
angle on the face.
Cordless/Rechargeable - shaver can only
be used without the power cord.
Quick Charge - Shaver will charge long
enough for one shave in 5 minutes.
Water Resistance
Dry – Shaver can only be used dry. Can be
cleaned with cleaning brush.
Wet/Dry – Shaver can be used in the
shower and with shaving gels. Can be
cleaned by rinsing under running water.
Before using, read the important
safety instructions in front of the
manual.
1. Connect the cord
to the shaver and
then to the electrical
outlet. (Diagrams A
& B) The charging
indicator light will
glow green.
2. Your shaver will
have a partially
charged battery. We
recommend giving
the battery a full
charge prior to your
first use. (Diagram C)
Charging
Use the product until the battery
is low. To preserve the life of the
batteries, let them fully run out
every six months, then recharge
them for a full 24 hours*
CAUTION!
Make sure the shaver and your
hands are dry when placing the
shaver on charge.
Always charge the shaver in a
cool, dry place.
floating foils automatically adjust
to the contours of your face. Only
apply light pressure on the shaving
head while shaving and use short,
circular strokes. (Diagram E)
5. After shaving, turn the shaver off.
(Diagram D)
Remington recommends that you
use your new shaver daily for up to
three weeks to allow time for your
hair and skin to become accustomed
to the new shaving system.
Shave
Shaving Tips (Dry)
Before using, read the important
safety instructions in front of the
manual.
1 . Begin by removing the
Stubble comb/Head guard from
your shaver.
2. Press the on/off
button to turn
on. (Diagram D)
3. Stretch the skin
with your free
hand so the hairs
stand upright.
4. Hold the
shaving head
so all screens touch your skin
simultaneously. The independently
Ensure your skin is dry and free
of oils.
Wait at least 15 minutes after
getting up before shaving, to ensure
your face is free of puffiness that
may be present from sleeping.
Always hold the shaver at a right
angle to the skin so the screens
are touching the skin with equal
pressure.
Stretch skin with the free hand
so hairs stand upright, making it
easier for them to enter the cutting
chamber.
Shave with short, circular strokes.
The use of short, circular motions in
stubborn areas may obtain a closer
shave, especially along the neck
and chin line.
Do not press hard against the skin
in order to avoid damage to the
foil heads.
NOTE: To achieve a stubble look
instead of a clean shave, affix the
Stubble comb/Head guard over the
cutter assembly and shave as usual.
5
6
Indicators
2 Stage LED - Flashing green
light indicates battery needs to be
charged. Solid green light will turn
on when charging and turn off when
full charge reached.
Worldwide Voltage – shaver
automatically adapts to an outlet
voltage between 100V and 240V.
Shaving Tips With Gel or Foam (In Shower or Over the Sink)
All models can be used in the shower for optimal performance.
NOTE: In order to ensure optimal performance, thoroughly rinse the shaver
head under water during and after shaving.
1. Apply water to face and neck area.
2. Apply shave gel or foam to applicable shaving area.
3. Rinse shaver head under water.
4. Shave face and neck using short, circular strokes.
5. Throughout the shave, regularly rinse shaver head under water to avoid residue
build up.
6. When finished shaving, rinse face.
7. Thoroughly rinse shaver head of all gel or foam.
8. Follow cleaning and care instruction.
A
B
C
E
D
FEATURE PF7400 PF7500 PF7600
INTERCEPT
TRIMMER
Yes Yes Yes
PIVOT Yes Yes Yes
POWER SYSTEM Cordless/
Rechargeable
Cordless/
Rechargeable
Cordless/
Rechargeable
BATTERY TYPE NiMH Lithium Lithium
FULL CHARGE
TIME
16 hours 2 hours 2 hours
CORDLESS SHAVE
TIME
50 minutes 60 minutes 60 minutes
5 MIN. QUICK
CHARGE
No Yes Yes
INDICATORS 2 Stage LED 2 Stage LED 2 Stage LED
WATER
RESISTANCE
Wet/Dry Wet/Dry Wet/Dry
VOLTAGE Worldwide Worldwide Worldwide
REPLACEMENT
PART NO.
SPF-PF SPF-PF SPF-PF
Register Your New Product Today!
By registering your new Remington® product, you will receive special offers.
Register online at: RemingtonProducts.com
Monthly Cleaning:
1. Perform the daily
cleaning steps 1-4.
2. Place a drop of
liquid soap on
each cutter and
in the hairpocket.
(Diagram M)
3. Brush the soap
around vigorously
with the supplied
cleaning brush.
Be sure to work
the soap into the
corners of the
hairpocket and into
any especially dirty
cutters.
(Diagram N)
4. Add a small amount
of water to the
cutters.
5. Replace the foil
assembly.
(Diagram O)
6. Turn on the shaver
for approximately
30 seconds.
7. While the shaver is running, rinse
the foils under running water.
(Diagram P)
8. Turn off shaver.
9. Remove foil assembly.
10.Rinse the cutters, hairpocket,
and foil assembly thoroughly.
(Diagram Q)
11. Shake off excess water.
12. Replace foil assembly. (Diagram O)
13. Allow shaver to dry before next
use and attach the Stubble comb/
Head guard.
Do not remove or replace head
assembly while shaver is running
as it may cause damage to the
unit’s foils and cutters.
To clean the external surfaces of
the shaver, use a damp cloth. Do
not use strong detergents or other
chemicals.
To dry, wipe the surface of the
shaver with a dry towel. Do not
use a hair dryer or heater to dry
the shaver.
The shaver should not be used until
it has dried.
Lubricate each cutter with
household oil.
This product contains no user
serviceable parts.
The shaver is a
wet/dry appliance.
The shaver may
be cleaned under
warm water.
Trim
Cleaning and Care
NOTE: When cleaning your shaver,
make sure the shaver is turned off
and disconnected from the power
adapter.
For optimal shaver performance,
clean your shaver after each use.
CAUTION!
Shaver can be placed under running
water for cleaning only. Never
submerge the shaver in water.
1. Slide trimmer release button
up to engage the trimmer.
(Diagram F)
2. Trim long, difficult hairs and
side burns.
(Diagram G)
3. Close trimmer by sliding the
button down. (Diagram H)
Daily Cleaning:
1. Pull off Stubble comb/Head guard, if
using, and rinse attachment.
2. Grasp the front
and back of the
cutter assembly
and pull away from
the shaver body.
(Diagram I)
3. Tap the stubble
from the foils and
cutters.
4. Use the cleaning
brush to sweep
any loose hairs
from the cutters,
hairpocket, and
trimmer. Pay
close attention
to cleaning out
the corners and
crevices inside
the hairpocket.
(Diagrams J–K)
5. Rinse head under running water.
6. Gently dry with towel or leave
disassembled to air dry.
7. Replace hair pocket assembly when
dry. (Diagram L)
8. Reattach the Stubble comb/Head
guard to protect the shaving head
until next use.
When your rechargeable shaver reaches
the end of its useful life, the batteries
must be removed from the shaver and
recycled or disposed of properly in
accordance with your state and local
requirements. If this is not required by
law, you may elect to dispose of the
shaver with the batteries.
This device uses one of the following
types of rechargeable batteries: nickel
metal hydride (NiMH), nickel cadmium
(Ni-Cd) or Lithium Ion (Li-Ion) (see
included battery for indication of type).
CAUTION: ALL RECHARGEABLE
BATTERIES MUST BE RECYCLED
OR DISPOSED OF IN ACCORDANCE
WITH APPLICABLE STATE AND LOCAL
REGULATIONS. DO NOT PUT IN FIRE
OR MUTILATE, AS THE BATTERY
MAY BURST OR RELEASE TOXIC
MATERIALS. DO NOT SHORT-CIRCUIT,
AS THIS MAY CAUSE BURNS.
Product Disposal
To Remove the Rechargeable Battery:
1. Remove phillips head screw at the
base of the shaver.
2. Pry the outer sleeve down off the
shaver handle.
3. Pry the back housing cover off the
shaver.
4. Remove screws from inner housing
and open inner housing to expose
the batteries.
5. Snip the battery wires and remove
batteries.
6. Dispose of battery properly.
Maintain your shaver’s peak
performance! Keep your shaver
performing like new!
Because your satisfaction is
important to us, we want to make
it simple for you to keep your new
shaver performing at its peak.
For the best possible shave, it is
necessary to replace the heads
and cutters on your shaver every
12 months.
Remington makes this easy!
Two easy ways to order!
1. Call!
U.S. and Canada residents call
800-392-6544
2. Order Online at
RemingtonProducts.com
Warranty
Limited Three-Year Warranty
Spectrum Brands, Inc. warrants this
product against any defects that are
due to faulty material or workmanship
for a three-year period from the origi-
nal date of consumer purchase. This
warranty does not include damage to
the product resulting from accident or
misuse. If the product should become
defective within the warranty period,
we will replace it free of charge.
Return your product and sales receipt
with your name, address and day
time phone number to: Remington
Returns Center, 507 Stokely Dr., P.O.
Box 1, Deforest, WI 53532. For more
information call 800-736-4648 in the
U.S. or Canada.
Warranty excludes:
Foils and cutters
KEEP ORIGINAL SALES RECEIPT
AS PROOF OF PURCHASE FOR
WARRANTY PURPOSES.
This warranty does not cover
products damaged by the following:
Accident, misuse, abuse or
alteration of the product
Servicing by unauthorized persons
Use with unauthorized accessories
Connecting it to incorrect current
and voltage
Wrapping cord around appliance
causing premature wear and
breakage
Any other conditions beyond our
control
SPECTRUM BRANDS, INC.
SHALL NOT BE RESPONSIBLE
FOR ANY INCIDENTAL, SPECIAL
OR CONSEQUENTIAL DAMAGES
RESULTING FROM THE USE OF THIS
PRODUCT. ALL IMPLIED WARRANTIES,
INCLUDING BUT NOT LIMITED TO
IMPLIED WARRANTIES OF FITNESS
AND MERCHANTABILITY, ARE LIMITED
IN DURATION TO THREE YEARS FROM
DATE OF ORIGINAL PURCHASE.
This warranty gives you specific legal
rights and you may also have other
rights which vary from state to state
or province to province. Some states
do not allow the exclusion or limita-
tion of incidental, special or conse-
quential damages.
How To Order Shaver Accessories
Please refer to the shaver compari-
son and features chart near the
front of this manual that lists the
correct replacement part number
for your shaver.
It is very important to replace your
head and cutters when necessary to
ensure a close, comfortable shave
without irritation. We recommend they
be replaced every 12 months. Here
are some signs of head and cutter
wear, indicating that replacement
is needed:
Irritation: As the heads get
excessively worn you may
experience some skin irritation.
This would be especially noticeable
when you apply moisturizing lotion.
Pulling: When the cutters wear you
may feel a sense of pulling and a
loss of closeness when you shave.
This is an indication that it is time
to replace your heads and cutters.
Performance Guarantee
Spectrum Brands, Inc. Money-back Offer
If within 30 days after you have purchased your Remington
® branded product, you
are not satisfied and would like a refund, return it with the sales slip indicating
purchase price and date of purchase to the retailer from whom it was purchased.
Spectrum Brands, Inc. will reimburse all retailers who accept the product within 30
days from the date of purchase. If you have any questions concerning the money-
back guarantee, please call 800-736-4648 in the U.S. or Canada.
Remington Guarantees Satisfaction After 60 Days!
Remington 60-Day Money Back Guarantee*
If within 60 days after purchasing any Remington
® branded product, you are
not completely satisfied and would like a refund, return it with the original dated
sales receipt directly to Remington
® and receive a full refund.** For questions
concerning the money-back guarantee, please call 800-736-4648 in the U.S.
or Canada.
*Applies to U.S. and Canadian customers’ returns only.
**Terms and conditions apply.
Terms and Conditions
1. Refund will be in the form of a check issued in U.S. Dollars and will be provided
only if all Terms and Conditions are met.
2. The following items must be returned to Remington
® and postmarked no later
than 60 days after purchase of the Remington
® branded Men’s Shave and
Groom product:
a. The Remington® product;
b. The original sales receipt indicating price and date purchased; and
c. The completed 60-day money back guarantee form located at
RemingtonProducts.com/60day.
3. In addition, Remington
®, in its discretion, must determine that the returned
product was used in accordance with the instruction booklet (included with the
product at the time of purchase).
4. Returns should be mailed prepaid (no collect returns accepted) to:
Remington 60-Day MBG
507 Stokely Drive, Box 1
DeForest, WI 53532
100-240 VAC, 50/60 Hz TYPE: PF7400, PF7500, PF7600
Questions or comments:
Call 800-736-4648 in the U.S. or Canada or visit RemingtonProducts.com
Dist. by: Spectrum Brands, Inc., Middleton, WI 53562
Dist. by: Spectrum Brands Canada Inc.
255 Longside Drive, Unit 101
Mississauga, ON L5W 1L8
REMINGTON is a Registered Trademark of Spectrum Brands, Inc.
© 2018 Spectrum Brands, Inc. 9/18
23882
Made in China.
T22-7000727-A
Contains a
listed adapter
IMPORTANT SAFETY INSTRUCTIONS -
SAVE THESE INSTRUCTIONS
DANGER - TO REDUCE THE RISK OF
FIRE OR ELECTRIC SHOCK, CAREFULLY
FOLLOW THESE INSTRUCTIONS
For connection to a power supply not in the U.S.A., use an attachment plug adapter
of the proper configuration for the power outlet.
Power Adaptor
5. Refund does not include postage costs for the return of the product, but will
include applicable taxes paid by customer, if any.
6. No responsibility will be accepted for late, lost, stolen, misdirected or damaged
product.
7. Please allow 4-6 weeks to receive your refund by check.
F
G
H
L
I
J
K
P
N
O
Q
M
Specyfikacje produktu
| Marka: | Remington |
| Kategoria: | Golarka |
| Model: | PF7500C |
Potrzebujesz pomocy?
Jeśli potrzebujesz pomocy z Remington PF7500C, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą
Instrukcje Golarka Remington
14 Października 2024
30 Września 2024
30 Września 2024
23 Września 2024
22 Września 2024
16 Września 2024
16 Września 2024
15 Września 2024
14 Września 2024
14 Września 2024
Instrukcje Golarka
- Golarka AEG
- Golarka Xiaomi
- Golarka Braun
- Golarka Philips
- Golarka Livoo
- Golarka SilverCrest
- Golarka Severin
- Golarka Panasonic
- Golarka Adler
- Golarka Marquant
- Golarka Niceboy
- Golarka Conair
- Golarka Taurus
- Golarka Orbegozo
- Golarka Blaupunkt
- Golarka Grundig
- Golarka Rowenta
- Golarka Mesko
- Golarka Unold
- Golarka Zelmer
- Golarka Create
- Golarka Melissa
- Golarka Beper
- Golarka Philco
- Golarka Koenic
- Golarka Wahl
- Golarka Cecotec
- Golarka Camry
- Golarka Scarlett
- Golarka Nevir
- Golarka Aurora
- Golarka DCG
- Golarka Axis
- Golarka Princess
- Golarka Solac
- Golarka Duronic
- Golarka GA.MA
- Golarka Lanaform
- Golarka Garett
- Golarka Sencor
- Golarka Vitek
- Golarka PRIME3
- Golarka Eldom
- Golarka Ufesa
- Golarka Essentiel B
- Golarka Lifetec
- Golarka Carmen
- Golarka Doffler
- Golarka Pro-Idee
- Golarka Easy Home - Aldi
- Golarka JML
- Golarka VS Sassoon
Najnowsze instrukcje dla Golarka
12 Października 2024
9 Października 2024
9 Października 2024
9 Października 2024
8 Października 2024
8 Października 2024
8 Października 2024
8 Października 2024
7 Października 2024
7 Października 2024