Instrukcja obsługi Readynet WRT150N

Readynet router WRT150N

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Readynet WRT150N (4 stron) w kategorii router. Ta instrukcja była pomocna dla 2 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/4
Quick Installation Guide
WRT15
Wireless R
Step 2: Basic Wireless Settings
The pre-configured settings on Figure 3 to the right
will be appropriate for most settings. You might want
to change the Network Name (ESID) and Frequency
(Channel) fields. Click ‘Advanced’ and then
‘WiFi Basic Setup’. To edit the Wireless broadcast ID,
change the “Network Name (SSID)” field and click
the ‘Apply’ button at the bottom of the page.
Click ‘Next’ to move to the final step.
Step 3: Wireless Security Setup
This final step allows you to prevent unauthorized
use of your wireless network by configuring an
encryption method and a pass-phrase that only you
know. Click the ‘Advanced’ link and then the
‘WiFi- Security Setup’. If, for example, you want to
use WPA2-PSK as the Security mode, automatic
cipher, and abcxyz123 as the pass-phrase, your
setting would be like the following image. First set
the ‘Security Mode’ to WPA, then in the WPA
section below, change the ‘Pass Phrase’ to abcxyz123.
D. Setting Up Your Wireless Devices
Your wireless devices (desktop, laptop, iPad,
smart-phone, etc.) must be configured to work with
your wireless router. Each of these devices must have
an internal or external wireless adapter and applicable
drivers. User guides for each of these devices should
have instructions for wireless set up. You will need
the SSID and password you assigned to this wireless
router during router set up. For each wireless device,
access the setup menu, choose the appropriate
SSID from the list of wireless networks, enter your
password, and test the wireless connection.
Figure 3
Figure 4
A. Connect the WRT150N Router to Your Computer
1. To set up your router for the
first time, please connect the
router to your desktop or laptop
computer as shown in the
following diagram. Your
broadband Internet access will
generally be from a cable modem,
ADSL modem, or similar device.
2. After the hardware connections have
been completed, check the status of the LED
Indicators using the following table:
Note: If the LED indicator is not displaying a “Normal Status” as described in the table above, please check the
associated hardware and connections.
Safety Notice
• Thedeviceshouldbeplacedonaathorizontalsurface,orsecuredsafelytoawall.
• Operateequipmentawayfromheatsources.
• Providegoodairventilation.
• Keepawayfromwateranddampareas.
• Disconnectpowerfromthedeviceduringseverethunderstorms.
• UseonlytheincludedACpoweradapter.
• Keeprouteratleast20cmawayfrompeopletoreduceexposuretoradiofrequencyemissions.
B. Configure Your Computer to Operate with the WRT150N Router
1. The network settings of your computer
operating system must be set to automatically
obtain an IP address and to automatically
obtain a DNS Server Address.
2. Type in the Address “http://192.168.11.1”
field of your web browser and press the
“Enter” key. A User Name and Password dialog
box will appear. The default User Name is
“admin” and the default password is “admin”.
Enter the user name and password then click
the “Login” button.
Note: The default wireless IP address for the
wireless router is and the default 192.168.11.1
Subnet Mask 255.255.255.0 is
C. Configure Your WRT150N Router
1. WAN Connection Protocol
The default WAN connection Protocol is
‘Dynamic IP Address’. Continue with this step
only if you need to use a WAN connection
protocol other than ‘Dynamic IP Address’.
To change the WAN connection protocol
click the ‘WAN’ link. Now select the
appropriate WAN connection method.
Finally you might need to enter protocol
specific settings given to you by your ISP.
Click ‘Apply’.
Broadband
Internet
Acess
WAN
POWER
LAN
Desktop PC
Figure 1
Figure 2
LED Indicator Description Normal Status
PWR Power Status Indicator Steady Light
Wifi Wireless Status Indicator Steady Light or Slow Flashing
WPS Wi-Fi Protected Status Indicator OfforFlashingWhenPairing
WAN Broadband Network Status Indicator Steady Light or Slow Flashing
LAN 1-4 LAN Indicator Steady Light or Slow Flashing

Specyfikacje produktu

Marka: Readynet
Kategoria: router
Model: WRT150N

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Readynet WRT150N, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje router Readynet

Readynet

Readynet WRT300N-DD Instrukcja

25 Września 2024
Readynet

Readynet WRT300N-RN Instrukcja

25 Września 2024
Readynet

Readynet WRT150N Instrukcja

25 Września 2024

Instrukcje router

Najnowsze instrukcje dla router

Netgear

Netgear LB2120 4G LTE Instrukcja

15 Października 2024
Linksys

Linksys WRT3200ACM Instrukcja

15 Października 2024
D-Link

D-Link DAP-1360 Instrukcja

15 Października 2024
TP-Link

TP-Link Archer AXE75 Instrukcja

14 Października 2024
Linksys

Linksys EA8500 Instrukcja

13 Października 2024
Totolink

Totolink ND300 Instrukcja

12 Października 2024
ZyXEL

ZyXEL LTE 7460 Instrukcja

10 Października 2024
Netgear

Netgear Nighthawk R7200 Instrukcja

10 Października 2024
Netgear

Netgear FR114P Instrukcja

10 Października 2024
Asus

Asus RT-BE86U Instrukcja

9 Października 2024