Instrukcja obsługi Pulsar SF116


Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Pulsar SF116 (5 stron) w kategorii Nie skategoryzowane. Ta instrukcja była pomocna dla 4 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/5
1
SF 116
v1.2
SF116 16-port switch for 16 IP cameras
Edition 4 from 29.01.2019 :
Supercedes the edition 3 from : 06.06.2018
EN
Features:
Switch 16 ports
16 10/100 PoE ports Mb/s (data transfer
and power supply)
2 ports G1/TP, G2/TP ports) (UpLink) 10/100/1000 Mb/s (
2 ports G1/SFP, G2/SFP ports) 10/100/1000Mb/s SFP (
(UpLink)
W for each PoE port, supports devices complaint with 30
the IEEE802.3af/at standard (PoE+)
Supports auto-learning and auto-aging of MAC addresses
(16K size)
LED indication
Additional assembly elements
warranty 2 year from the production date
Example of use.
1. Technical description.
1.1. General description.
SF is a -ports PoE switch designed to supply IP cameras operating in IEEE 802.3af/at standard 116 16 .
Automatic detection of any devices powered in the PoE/PoE+ standard is enabled at the 1 ports of the switch The G1/TP 8 .
and G2/TP ports is used for connection of another network device via RJ45 connector. The switch is fitted with SFP slots
(marked as G1/SFP and G2/SFP), the use of ber optic module (GBIC) allows ber optic transmission.The operating status of
the device (described in the table below) is displayed on the LED display on the front panel.
The PoE technology ensures a network connection and reduces installation costs by eliminating the need to supply a
separate power cable for each device. This method allows supplying other network devices, such as IP phone, wireless access
point or rou . ter
2
1.2. Block diagram.
Fig. 1. Block diagram.
1.3. Description of components and connectors.
Table 1 see Fig , 3 and 4) . ( . 2
Element no.
(Fig. 2)
Description
[1]
LED indication
[2]
16 x PoE port (1 ) ÷16
[3]
2 x UPLINK ports (G1/TP, P) G2/T
[4]
2 x UPLINK ports (G1/SFP, G2/SFP)
[5]
Power Socket of the 230 V
[6]
Additional mounting elements
Fig. 2. The front power of the switch.
Fig. 3. Rear panel of the switch.
3
Fig. 4. The view switch'a.
1.4. Technical parameters
Table 2.
16 x PoE (10/100Mb/s) (RJ-45)
2 UpLink (10/100/1000Mb/s) (RJ- x 45)
2 x UpLink (10/100/1000Mb/s) (SFP)
with connection speed auto-negotiation and MDI/MDIX Auto Cross)
IEEE 802.3af/at ports), 52 V DC / 30 W at each port * (1÷16
Used pairs 1/2 (+), 3/6 (-)
IEEE802.3, 802.3u, 802.3x CSMA/CD, TCP/IP
14,8Gbps
Store-and-Forward
Switch power supply
Link
PoE Status
~100-240 V; 50/60 Hz; 3 A
temperature - 10°C ÷ 40°C,
relative humidity 5 - 90%, no condensation %
W=442, H=44, D=224 [+/- 2mm]
bracket for Rack 19”
1,2m
2,7 / 3,1kg
I (rst)
- 20°C ÷ 60°C
CE
* The given value of 30 W per port is the maximum value. The total power consumption should not exceed 160 W.


Specyfikacje produktu

Marka: Pulsar
Kategoria: Nie skategoryzowane
Model: SF116

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Pulsar SF116, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje Nie skategoryzowane Pulsar

Instrukcje Nie skategoryzowane

Najnowsze instrukcje dla Nie skategoryzowane