Instrukcja obsługi Panasonic PT-P1SDU
Panasonic
projektor wideo
PT-P1SDU
Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Panasonic PT-P1SDU (17 stron) w kategorii projektor wideo. Ta instrukcja była pomocna dla 10 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek
Strona 1/17
ENGLISH
R
Before operating this product, please read the instructions carefully and save this
manual for future use.
LCD Projector
Operating Instructions
Model No. PT-P1SDU
TQBJ 0184
Commercial Use
POWER
AUTO
SET UP
INPUT MENU
SHUTT ER
VOLUME
ENTER
ROTATE
RETURN
ENT ER
STD
2-ENGLISH ENGLISH-3
Preparation
IMPORTANT SAFETY NOTICE
Dear Panasonic Customer:
This instruction booklet provides all the necessary operating information that
you might require. We hope it will help you to get the most out of your new
product, and that you will be pleased with your Panasonic LCD projector.
The serial number of your product can be found on its bottom. You should note
it in the space provided below and retain this booklet in case service is required.
Model number: PT-P1SDU
Serial number:
WARNING:
Do not look into the lens while the projector is being used.
B
Strong light is emitted from the projector’s lens. If you look
directly into this light, it can hurt and damage your eyes.
BBe especially careful not to let young children look
into the lens. In addition, disconnect the power cord
plug when you are away from the projector.
WARNING:
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO
NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE.
The lightning flash with arrowhead symbol, within an
equilateral triangle, is intended to alert the user to the
presence of uninsulated “dangerous voltage” within the
product’s enclosure that may be of sufficient magnitude to
constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is
intended to alert the user to the presence of important
operating and maintenance (servicing) instructions in the
literature accompanying the product.
Power Supply: This LCD Projector is designed to operate on 100 V – 240 V, 50 Hz/60
Hz AC, house current only.
CAUTION: The AC power cord which is supplied with the projector as an accessory can
only be used for power supplies up to 125 V, 7 A. If you need to use higher
voltages or currents than this, you will need to obtain a separate 250 V
power cord. If you use the accessory cord in such situations, fire may result.
CAUTION:
This equipment is equipped with a three-pin grounding-type power
plug. Do not remove the grounding pin on the power plug. This
plug will only fit a grounding-type power outlet. This is a safety
feature. If you are unable to insert the plug into the outlet, contact
an electrician. Do not defeat the purpose of the grounding plug.
Do not remove
WARNING:
B
Not for use in a computer room as defined in the Standard for the Protection
of Electronic Computer/Data Processing Equipment, ANSI/NFPA 75.
BFor permanently connected equipment, a readily accessible disconnect
device shall be incorporated in the building installation wiring;
BFor pluggable equipment, the socket-outlet shall be installed near the
equipment and shall be easily accessible.
WARNING:
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses and can
radiate radio frequency energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no guarantee that interference
will not occur in a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
– Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
– Consult the dealer or an experienced radio/TV technician for help.
FCC CAUTION: To assure continued compliance, use only shielded interface cables when
connecting to computers or peripheral devices.
Any unauthorized changes or modifications to this equipment will void the
users authority to operate.
Declaration of Conformity
Model Number: PT-P1SDU
Trade Name: Panasonic
Responsible party: Panasonic Corporation of North America
Address: One Panasonic Way Secaucus New Jersey 07094
Telephone number: 1-800-528-8601 or 1-800-222-0741
Email: pbtsservice@panasonic.com
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause undesired operation.
ENGLISH-5
Preparation
4-ENGLISH
Contents
Preparation
IMPORTANT SAFETY NOTICE ...2
Precautions with regard to
safety .........................................5
Accessories .................................9
Before use ..................................10
Read this page first ...................12
Location and function of each
part...........................................14
Getting started
Setting-up...................................20
Projection methods, Projector
position, Projection distances
Connections...............................22
Connecting to computer,
Connecting to video equipment,
Preparation for the remote
control unit..............................24
Basic operation
Turning on the power................26
Turning off the power................28
Useful functions
Correcting the image position
automatically...........................30
Turning off the picture and sound
momentarily ............................31
Adjusting the volume ................31
Using the SD memory card.......32
Inserting and removing the SD
memory card, SD selection screen
Playing back images from a SD
memory card ...........................35
Button functions during playback
Setting a detailed playback
method for the SD memory card
..................................................37
MODE, AUTO PLAY, INTERVAL,
EFFECT, AUDIO
Making a presentation without
using a computer....................39
Adjustments and settings
On-screen menus ......................40
Menu screens, Menu operation
guide, Returning a setting to the
factory default
Adjusting the picture.................44
PICTURE MODE,
DAYLIGHTVIEW, DETAILED
SETUP
Adjusting the position...............46
KEYSTONE, ASPECT, POSITION,
DETAILED SETUP
Other settings ............................49
AUTO SIGNAL, TV-SYSTEM,
FRONT/REAR, DESK/CEILING,
HIGHLAND, LAMP RUNTIME, SXGA
MODE, CTRL PANEL, NR
Changing the display
language..................................51
Setting up the security
function ...................................52
SETUP, AMEND PASSWORD,
TO REGISTER SD KEY 1(2),
INSERTED SD KEY
Care and maintenance
When the TEMP indicator and the
LAMP indicator are
illuminated...............................54
Cleaning and replacing
the air filter ..............................56
Replacing the lamp unit ............57
Before calling for service..........60
Cleaning and maintenance .......62
Others
Specifications ............................63
Appendix ....................................65
List of compatible signals, DCF
standard, Guide screen for
computer connection, Projection
dimensions calculation methods
Dimensions ................................69
Trademark
acknowledgements ................70
NOTES IMPORTANTES
CONCERNANT LA SECURITE
...71
Précautions de sécurité ............72
Avant l’utilisation.......................76
Remplacement du bloc de lampe
...78
Precautions with regard to safety
WARNING
If you notice smoke, strange smells or noise coming from the
projector, disconnect the power cord plug from the wall outlet.
BDo not continue to use the projector in such cases, otherwise fire or
electric shocks could result.
BCheck that no more smoke is coming out, and then contact an Authorized
Service Center for repairs.
BDo not attempt to repair the projector yourself, as this can be dangerous.
Do not install this projector in a place which is not strong enough to
take the full weight of the projector.
BIf the installation location is not strong enough, it may fall down or tip over,
and severe injury or damage could result.
Installation work (such as ceiling suspension) should only be carried
out by a qualified technician.
BIf installation is not carried out correctly, there is the danger that injury or
electric shocks may occur.
If foreign objects or water get inside the projector, or if the projector is
dropped or the cabinet is broken, disconnect the power cord plug from
the wall outlet.
BContinued use of the projector in this condition may result in fire or electric
shocks.
BContact an Authorized Service Center for repairs.
Do not overload the wall outlet.
BIf the power supply is overloaded (for example, by using too many
adapters), overheating may occur and fire may result.
Do not remove the cover or modify it in any way.
BHigh voltages can cause fire or electric shocks.
BFor any inspection, adjustment and repair work, please contact an
Authorized Service Center.
Clean the power cord plug regularly to prevent it from becoming
covered in dust.
BIf dust builds up on the power cord plug, the resulting humidity can
damage the insulation, which could result in fire. Pull the power cord plug
out from the wall outlet and wipe it with a dry cloth.
BIf not using the projector for an extended period of time, pull the power
cord plug out from the wall outlet.
Specyfikacje produktu
| Marka: | Panasonic |
| Kategoria: | projektor wideo |
| Model: | PT-P1SDU |
Potrzebujesz pomocy?
Jeśli potrzebujesz pomocy z Panasonic PT-P1SDU, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą
Instrukcje projektor wideo Panasonic
7 Czerwca 2024
7 Czerwca 2024
7 Czerwca 2024
7 Czerwca 2024
7 Czerwca 2024
7 Czerwca 2024
7 Czerwca 2024
7 Czerwca 2024
7 Czerwca 2024
7 Czerwca 2024
Instrukcje projektor wideo
- projektor wideo Sony
- projektor wideo Sharp
- projektor wideo Philips
- projektor wideo Acer
- projektor wideo Epson
- projektor wideo Hisense
- projektor wideo Canon
- projektor wideo Viewsonic
- projektor wideo Casio
- projektor wideo Pyle
- projektor wideo XGIMI
- projektor wideo NEC
- projektor wideo Sanyo
- projektor wideo Optoma
- projektor wideo Barco
- projektor wideo 3M
- projektor wideo Hitachi
- projektor wideo BenQ
- projektor wideo Adj
- projektor wideo Stairville
- projektor wideo Speaka
- projektor wideo InFocus
- projektor wideo Vivitek
- projektor wideo Vankyo
- projektor wideo EKO
- projektor wideo Christie
Najnowsze instrukcje dla projektor wideo
25 Września 2024
25 Września 2024
19 Września 2024
16 Września 2024
16 Września 2024
16 Września 2024
16 Września 2024
16 Września 2024
14 Września 2024
14 Września 2024