Instrukcja obsługi Panasonic PT-LX271U

Panasonic projektor wideo PT-LX271U

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Panasonic PT-LX271U (72 stron) w kategorii projektor wideo. Ta instrukcja była pomocna dla 2 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/72

Operating Instructions

Functional Manual

DLP™ Projector Commercial Use

Thank you for purchasing this Panasonic Product.

Before operating this product, please read the instructions carefully, and save this manual

for future use.

Before using your projector, be sure to read “Read this rst!” (See pages 2 to 8).

Model No. PT-LW321U

PT-LW271U

PT-LX351U

PT-LX321U

PT-LX271U

ENGLISH

TQBJ0614

2 - ENGLISH

Important

Information

Read this rst!

WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT

TO RAIN OR MOISTURE.

Power Supply: This Projector is designed to operate on 100 V - 240 V, 50 Hz/60 Hz AC, house current only.

CAUTION: The AC power cord which is supplied with the projector as an accessory can only be used for

power supplies up to 125 V, 10 A. If you need to use higher voltages or currents than this, you will

need to obtain a separate 250 V power cord. If you use the accessory cord in such situations, re

may result.

The lightning ash with arrowhead symbol, within an equilateral triangle, is intended to alert the

user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may

be of sufcient magnitude to constitute a risk of electric shock to persons.

The exclamation point within an equilateral triangle is intended to alert the user to the presence of

important operating and maintenance (servicing) instructions in the literature accompanying the

product.

CAUTION: This equipment is equipped with a three-pin grounding-type power

plug. Do not remove the grounding pin on the power plug. This plug

will only t a grounding-type power outlet. This is a safety feature. If

you are unable to insert the plug into the outlet, contact an electrician.

Do not defeat the purpose of the grounding plug. Do not remove

CAUTION: To assure continued FCC emission limit compliance, follow the attached installation instructions.

The user must use the provided RGB computer interface cable with ferrite cores. Any changes or

modications not expressly approved by Panasonic Corp. of North America could void the user's

authority to operate this device.

For USA-California Only

This product contains a CR Coin Cell Lithium Battery which contains Perchlorate Material – special handling

may apply.

See www.dtsc.ca.gov/hazardouswaste/perchlorate

Read this rst!

ENGLISH - 3

Important

Information

FCC NOTICE (USA)

Declaration of Conformity

Model Number: PT-LW321U / PT-LW271U / PT-LX351U / PT-LX321U / PT-LX271U

Trade Name: Panasonic

Responsible Party: Panasonic Corporation of North America

Address: Two Riverfront Plaza, Newark, NJ 07102-5490

Telephone number: (877)803-8492

E-mail: projectorsupport@us.panasonic.com

This device complies with Part 15 of the FCC Rules.

Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and (2) this device must accept any interference received,

including interference that may cause undesired operation.

To assure continued compliance, follow the attached installation instructions and do not make any unauthorized

modications.

CAUTION:

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant

to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful

interference in a residential installation. This equipment generates, uses and can radiate radio frequency

energy and, if not installed and used in accordance with the instructions, may cause harmful interference

to radio communications. However, there is no guarantee that interference will not occur in a particular

installation. If this equipment does cause harmful interference to radio or television reception, which can be

determined by turning the equipment off and on, the user is encouraged to try to correct the interference by

one of the following measures:

Reorient or relocate the receiving antenna.

•

Increase the separation between the equipment and receiver.

•

Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

•

Consult the dealer or an experienced radio/TV technician for help.

•

The user may nd the booklet “Something About Interference” available from FCC local regional ofces helpful.

FCC Warning:

To assure continued FCC emission limit compliance, follow the attached installation instructions and the user

must use only shielded interface cables when connecting to host computer or peripheral devices. Also, any

unauthorized changes or modications to this equipment could void the user’s authority to operate this device.

NOTIFICATION (Canada)

This class B digital apparatus complies with Canadian ICES-003.

WARNING:

Not for use in a computer room as dened in the Standard for the Protection of Electronic Computer/Data •

Processing Equipment, ANSI/NFPA 75.

For permanently connected equipment, a readily accessible disconnect device shall be incorporated in the •

building installation wiring.

For pluggable equipment, the socket-outlet shall be installed near the equipment and shall be easily •

accessible.

Notice (USA only):

This product has a High Intensity Discharge (HID) lamp that contains mercury. Disposal may be regulated •

in your community due to environmental considerations. For disposal or recycling information, please visit

Panasonic website: http://www.panasonic.com/environmental or call 1-888-769-0149.

Specyfikacje produktu

Marka:	Panasonic
Kategoria:	projektor wideo
Model:	PT-LX271U
Kolor produktu:	Biały
Typ produktu:	Przenośny projektor
Źródło zasilania:	Prąd przemienny
Wbudowany wyświetlacz:	Nie
Częstotliwość wejściowa AC:	50 - 60 Hz
Napięcie wejściowe AC:	100 - 240 V
Wysokość produktu:	100 mm
Szerokość produktu:	288 mm
Głębokość produktu:	231 mm
Waga produktu:	2500 g
W zestawie pilot zdalnego sterowania:	Tak
Podręcznik użytkownika:	Tak
Poziom hałasu:	34 dB
Wbudowane głośniki:	Tak
Moc wyjściowa (RMS):	8 W
Zasięg obiektywu:	21.8 - 24
Prędkość transferu danych przez Ethernet LAN:	10, 100 Mbit/s
Ilość portów Ethernet LAN (RJ-45):	1
Umieszczenie:	Sufit
Zakres temperatur (eksploatacja):	5 - 40 °C
Zakres wilgotności względnej:	20 - 80 %
Współczynnik kontrastu (typowy):	7500:1
Natywne proporcje obrazu:	4:3
Możliwość przybliżenia:	Tak
Wi-Fi:	Nie
Skrócona instrukcja obsługi:	Tak
Przewody:	AC, VGA
Pobór mocy w trybie czuwania:	6 W
Wejscie Audio (L,P):	2
Przewodowa sieć LAN:	Tak
Zintegrowany czytnik kart:	Nie
Kompatybilność 3D:	Nie
Pobór mocy:	220 W
Typ lamp:	UHM
Ilość lamp:	1 lamp(y)
Ilość portów HDMI:	1
Port RS-232:	1
Baterie w zestawie:	Tak
Pozycjonowanie na rynku:	Przenośny
Liczba portów VGA (D-Sub):	3
HDCP:	Nie
Ilość wbudowanych glosników:	1
Dopuszczalna wysokość podczas eksploatacji (n.p.m.):	750 - 3000 m
Długość ogniskowa:	2.5 - 2.67 mm
Zasięg skanowania w poziomie:	15 - 91.1 kHz
Zasięg skanowania (długość):	24 - 85.1 Hz
Wejście PC (D-Sub):	Tak
Wyjście audio (prawe/lewe):	1
Obsługiwane tryby wideo:	1080i, 1080p, 480i, 480p, 576i, 576p, 720p
Port DVI:	Nie
Obsługiwane proporcje obrazu:	4:3
Pełny HD:	Nie
Pilot zdalnego sterowania:	Podczerwień
System formatu sygnału analogowego:	NTSC, NTSC 4.43, PAL 60, PAL M, PAL N, SECAM
Wejście audio dla PC:	Tak
Ostrość:	Ręczny
Interfejs SCSI:	RS-232
Jasność projektora:	2700 ANSI lumenów
Technologia projekcji:	DLP
Naturalna rozdzielczość projektora:	XGA (1024x768)
Korekcja Keystone'a, poziom:	-40 - 40 °
Jednorodność:	80 %
Odległość projekcji:	0.76 - 7.62 m
Kompatybilność rozmiaru ekranu:	30 - 300 "
Rodzaj źródła światła:	Lampa
Moc lampy:	190 W
Żywotność źródła światła:	5000 h
Żywotność źródła światła (tryb ekonomiczny):	6000 h
Stosunek padania:	1.55 - 1.7:1
Współczynnik zbliżenia:	1.1:1
Rodzaj zoomu:	Ręczny
Poziom hałasu (tryp ekonomiczn):	29 dB
PC Audio out:	Tak
Częstotliwość zegara skanera:	162 MHz