Instrukcja obsługi Ozito PXRDS-300

Ozito radio PXRDS-300

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Ozito PXRDS-300 (8 stron) w kategorii radio. Ta instrukcja była pomocna dla 7 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/8
WHAT’S IN THE BOX
Cordless Radio
400mm Auxiliary Cable
3 x AAA Batteries
SPECIFICATIONS
Input: 18V
AM Frequency: 522-1620KHz
FM Frequency: 87.5-108MHz
Auxiliary Jack: 3.5mm
Speaker Output: 3W
Weight: 0.6kg
CORDLESS
RADIO
INSTRUCTION MANUAL
ozito.com.au
PXRDS-300
IN ORDER TO MAKE A CLAIM UNDER THIS WARRANTY YOU
MUST RETURN THE PRODUCT TO YOUR NEAREST BUNNINGS
WAREHOUSE WITH YOUR BUNNINGS REGISTER RECEIPT. PRIOR TO
RETURNING YOUR PRODUCT FOR WARRANTY PLEASE TELEPHONE
OUR CUSTOMER SERVICE HELPLINE:
Australia 1800 069 486
New Zealand 0508 069 486
WARRANTY
TO ENSURE A SPEEDY RESPONSE PLEASE HAVE THE MODEL
NUMBER AND DATE OF PURCHASE AVAILABLE. A CUSTOMER
SERVICE REPRESENTATIVE WILL TAKE YOUR CALL AND
ANSWER ANY QUESTIONS YOU MAY HAVE RELATING TO THE
WARRANTY POLICY OR PROCEDURE.
OZITO Australia/New Zealand (Head Ofce) 1-23 Letcon Drive, Bangholme, Victoria, Australia 3175.
The benets provided under this warranty are in addition to other rights and
remedies which are available to you at law.
Our goods come with guarantees that cannot be excluded at law. You are entitled to
a replacement or refund for a major failure and for compensation for any other
reasonably foreseeable loss or damage. You are also entitled to have the goods
repaired or replaced if the goods fail to be of acceptable quality and the failure
does not amount to a major failure.
Generally you will be responsible for all costs associated with a claim under this
warranty, however, where you have suffered any additional direct loss as a result of
a defective product you may be able to claim such expenses by contacting our
customer service helpline above.
0416
WARNING
The following actions will result in the warranty being
void.
• If the tool has been operated on a supply voltage other than that specied
on the tool.
• If the tool shows signs of damage or defects caused by or resulting from
abuse, accidents or alterations.
• Failure to perform maintenance as set out within the instruction manual.
• If the tool is disassembled or tampered with in any way.
5 YEAR REPLACEMENT WARRANTY
Your Product is guaranteed for a period of 60 months from the original date of
purchase and is intended for DIY (Do It Yourself) use only. If a product is defective it
will be replaced in accordance with the terms of this warranty. Lithium Ion
batteries and chargers are covered by a 36 month
warranty and are excluded from the warranty extension. Warranty excludes
consumable parts.
10
5
9 10
ONLINE MANUAL
Scan this QR Code with your
mobile device to take you to the
online manual.
BATTERY & CHARGER (sold separately)
This tool is compatible with all battery and chargers from the Ozito
Power X Change Range.
KNOW YOUR PRODUCT SETUP & PREPARATION
1. BATTERY & CHARGING
1 Control Panel
2 On/Off Switch
3 AAA Battery Compartment
4 Speaker
5 Carry Handle
6 LCD Display Screen
7 3.5mm Auxiliary Jack
8 Rear MP3 Player/Phone
Holder (not shown)
CORDLESS RADIO
The purchased battery will be shipped in a low charge condition, and requires charging
prior to use. Allow several cycles of charging and discharging (through use of the tool)
for the battery to reach its optimum performance / runtime.
1 Connect the charger into a mains power outlet.
4 The charger LED will illuminate
red signifying that the battery is
charging.
3 With the charger sitting on a at
surface, align the raised ribs on
the battery with the recess in the
charger and slide onto the charger
ensuring a rm connection.
2 The charger LED will ash green
showing power is being supplied
to the charger.
5 The charger LED will illuminate
green once the battery is fully
charged.
Charging your lithium ion battery - Fast Charger
Charger LED Indicator
LED Indicator Situation
GREEN (Flashing) Stand By (no battery pack is inserted)
RED (Flashing) Battery is charging (low charge)
RED (Illuminated) Battery is charging (mid charge)
GREEN (Illuminated) Battery is fully charged
BOTH(Illuminated) Battery pack is too hot or too cold (charging will begin
automatically when battery reaches correct charging
temperature).
BOTH (Flashing) Defective battery. Never charge a defective battery
pack!
Remove battery pack from charger.
1 2 43 6 7 8
9 400mm Auxiliary
Cable
10 3 x AAA Batteries
CAUTION: THE CHARGER FOR THIS PRODUCT SHOULD
BE PROTECTED BY A RESIDUAL CURRENT DEVICE
(RATED AT 30mA OR LESS).
2. BATTERY INSTALLATION
Battery Charge Indicator
The purchased battery is equipped with a
battery charge indicator to show the state of
the battery charge.
Press the charge indicator button and look to
see which LED lights.
Battery requires
immediate charging
Low state of charge, requires charging soon.
Mid state of charge
Full state of charge.
Note: The battery needs to be removed from the tool to check the state of charge.
1 Connect the charger into a mains power outlet.
4 The charger LED will illuminate red signifying that the battery is charging.
3 With the battery sitting on a at
surface, align the raised ribs on the
battery with the recess in the charger
and slide onto the battery ensuring a
rm connection.
2 The charger LED will ash green
showing power is being supplied
to the charger.
5 When removing the charger from the
battery, rst press the battery release
tab, then slide the charger from its
position.
Charging your lithium ion battery - Eco Charger
Charger LED Indicator
LED Indicator Situation
GREEN (Flashing) Stand By (no battery pack is inserted)
RED (Illuminated) Battery is charging (low charge)
GREEN (Illuminated) Battery is fully charged
RED (Flashing) Battery or Charger fault
RED & GREEN (Flashing) Battery pack is too hot or too cold (remove battery from
charger and store at room temperature 20ºC. Insert
battery again when at correct charging temperature). If
this happens again, the battery is defective and needs
to be replaced.
Installing AAA Batteries (for clock & memory function)
Installing the 18V Battery Pack
1. AAA Batteries sit in
compartment at base
of radio housing. AAA
batteries must be
installed prior to 18V
battery pack.
1. Holding the radio
housing, slide the
battery into the base
of the radio until it
clicks into place.
Removing the Battery Pack
1. Press down on the
battery release
button.
2. Open AAA battery
compartment
housing
3. Install AAA batteries
2. Holding the radio
housing, slide the
battery pack out.

Specyfikacje produktu

Marka: Ozito
Kategoria: radio
Model: PXRDS-300

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Ozito PXRDS-300, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje radio Ozito

Ozito

Ozito PXRDS-300U Instrukcja

13 Grudnia 2024
Ozito

Ozito PXRDS-300 Instrukcja

25 Sierpnia 2024

Instrukcje radio

Najnowsze instrukcje dla radio

Uniden

Uniden X70 Instrukcja

13 Stycznia 2025
Thomson

Thomson WKR60BT Instrukcja

13 Stycznia 2025
MB Quart

MB Quart GMR7V1.2 Instrukcja

13 Stycznia 2025
Roadstar

Roadstar HIF-1899TUMPK Instrukcja

12 Stycznia 2025
Tivoli Audio

Tivoli Audio Albergo Instrukcja

12 Stycznia 2025
Furrion

Furrion DV1230-BL Instrukcja

11 Stycznia 2025
Hyundai

Hyundai TRC 533 AU3BS Instrukcja

11 Stycznia 2025
Kenwood

Kenwood CR-ST90S Instrukcja

10 Stycznia 2025
Yamazen

Yamazen JYTM-RTV430 Instrukcja

7 Stycznia 2025
Sven

Sven SRP-50 Instrukcja

7 Stycznia 2025