Instrukcja obsługi Ozito HDR-3000U

Ozito Wiertarka HDR-3000U

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Ozito HDR-3000U (3 stron) w kategorii Wiertarka. Ta instrukcja była pomocna dla 5 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/3
size 445 x 210 mm
Danger! - Read the operating instructions to re-
duce the risk of inquiry
Caution! Wear ear-mus. The impact of noise
can cause damage to hearing.
Caution! Wear a breathing mask. Dust which
is injurious to health can be generated when
working on wood and other materials. Never use
the device to work on any materials containing
asbestos!
Caution! Wear safety goggles. Sparks gene-
rated during working or splinters, chips and dust
emitted by the device can cause loss of sight.
To avoid damaging the gearbox, the drill / ham-
mer drill selector switch should only be moved
when the machine is at a standstill
Protection class II
HDR-3000U
GB Additonal operating & safety instructions Hammer Drill
Service information
We have competent service partners in all countries named on the guarantee certicate whose contact
details can also be found on the guarantee certicate. These partners will help you with all service re-
quests such as repairs, spare and wearing part orders or the purchase of consumables.
Please note that the following parts of this product are subject to normal or natural wear and that the
following parts are therefore also required for use as consumables.
Category Example
Wear parts* Carbon brushes, chuck
Consumables* Drill bits
Missing parts
* Not necessarily included in the scope of delivery!
In the eect of defects or faults, please register the problem on the internet at www.isc-gmbh.info. Plea-
se ensure that you provide a precise description of the problem and answer the following questions in all
cases:
• Did the equipment work at all or was it defective from the beginning?
• Did you notice anything (symptom or defect) prior to the failure?
• What malfunction does the equipment have in your opinion (main symptom)?
Describe this malfunction.
Yang/Product-ManagementWeichselgartner/General-Manager
explains the following conformity according to EU directives and norms for
the following product
Hammer Drill HDR-3000U (Ozito)
2014/29/EU
2005/32/EC_2009/125/EC
2014/35/EU
2006/28/EC
X 2014/30/EU
2014/32/EU
2014/53/EC
2014/68/EU
90/396/EC_2009/142/EC
89/686/EC_96/58/EC
X 2011/65/EU
X 2006/42/EC
Annex IV
Noti ed Body:
Noti ed Body No.:
Reg. No.:
2000/14/EC_2005/88/EC
Annex V
Annex VI
Noise: measured LWA = dB (A); guaranteed LWA = dB (A)
P = KW; L/Ø = cm
Noti ed Body:
2004/26/EC
Emission No.:
Standard references: EN 60745-1; EN 60745-2-1; EN 55014-1;
EN 55014-2; EN 61000-3-2; EN 61000-3-3
Landau/Isar, den 13.06.2016
First CE: 16 Archive-File/Record: NAPR014299
Art.-No.: 44.722.32 I.-No.: 11016 Documents registrar: Robert Gehard
Subject to change without notice Wiesenweg 22, D-94405 Landau/Isar
ISC GmbH · Eschenstraße 6 · D-94405 Landau/Isar
Declaration of conrmity
The reprinting or reproduction by any other means, in whole or in part, of documentation and papers
accompanying products is permitted only with the express consent of the iSC GmbH.
Subject to technical changes
size 445 x 210 mm
Items supplied
Please check that the article is complete as
specied in the scope of delivery. If parts are
missing, please contact our service center or the
sales outlet where you made your purchase at
the latest within 5 working days after purchasing
the product and upon presentation of a valid bill
of purchase. Also, refer to the warranty table in
the service information at the end of the operating
instructions.
• Open the packaging and take out the equip-
ment with care.
• Remove the packaging material and any
packaging and/or transportation braces (if
available).
• Check to see if all items are supplied.
• Inspect the equipment and accessories for
transport damage.
• If possible, please keep the packaging until
the end of the guarantee period.
Danger!
The equipment and packaging material are
not toys. Do not let children play with plastic
bags, foils or small parts. There is a danger of
swallowing or suocating!
Proper use
The drill is designed for drilling holes into wood,
iron, non-ferrous metals and rock using the
appropriate bits.
The equipment is to be used only for its prescri-
bed purpose. Any other use is deemed to be a
case of misuse. The user / operator and not the
manufacturer will be liable for any damage or inju-
ries of any kind caused as a result of this.
Please note that our equipment has not been de-
signed for use in commercial, trade or industrial
applications. Our warranty will be voided if the
machine is used in commercial, trade or industrial
businesses or for equivalent purposes.
Technical data
Mains voltage: 230-240 V ~ 50 Hz ........................
Power input: .............................................. 710 W
Idling speed: ...................................... 0-3000/min
Drilling capacity Concrete 13 mm .........................
......................................................... Steel 13 mm
........................................................ Wood 25 mm
Protection class: II/ ............................................ &
Danger!
Sound and vibration
Sound and vibration values were measured in
accordance with EN 60745.
LpA sound pressure level ........................ 93 dB(A)
KpA uncertainty ............................................. 3 dB
LWA
sound power level ........................ 104 dB(A)
KWA uncertainty ............................................. 3 dB
Wear ear-mus.
The impact of noise can cause damage to hea-
ring.
Total vibration values (vector sum of three direc-
tions) determined in accordance with EN 60745.
Hammer drilling in concrete (handle)
Vibration emission value ah, ID = 9.13 m/s2
K uncertainty = 1.5 m/s2
Hammer drilling in concrete
(additional handle)
Vibration emission value ah, ID = 9.13 m/s2
K uncertainty = 1.5 m/s2
Drilling in metal (handle)
Vibration emission value ah, D = 2.57 m/s2
K uncertainty = 1.5 m/s2
Drilling in metal (additional handle)
Vibration emission value ah, I = 2.57 m/s2
K uncertainty = 1.5 m/s2
The specied vibration value was established in
accordance with a standardized testing method. It
may change according to how the electric equip-
ment is used and may exceed the specied value
in exceptional circumstances.
The specied vibration value can be used to
compare the equipment with other electric power
tools.
The specied vibration value can be used for initi-
al assessment of a harmful eect.
Keep the noise emissions and vibrations to a
minimum.
• Only use appliances which are in perfect wor-
king order.
• Service and clean the appliance regularly.
• Adapt your working style to suit the appliance.
• Do not overload the appliance.
• Have the appliance serviced whenever
necessary.
• Switch the appliance off when it is not in use.
• Wear protective gloves.
Caution!
Residual risks
Even if you use this electric power tool in ac-
cordance with instructions, certain residual
risks cannot be rules out. The following ha-
zards may arise in connection with the equip-
ment’s construction and layout:
1. Lung damage if no suitable protective dust
mask is used.
2. Damage to hearing if no suitable ear protecti-
on is used.
3. Health damage caused by hand-arm vibra-
tions if the equipment is used over a pro-
longed period or is not properly guided and
maintained.
For EU countries only
Never place any electric power tools in your
household refuse.
To comply with European Directive 2012/19/EC
concerning old electric and electronic equipment
and its implementation in national laws, old elec-
tric power tools have to be separated from other
waste and disposed of in an environment-friendly
fashion, e.g. by taking to a recycling depot.
Recycling alternative to the return request:
As an alternative to returning the equipment to
the manufacturer, the owner of the electrical
equipment must make sure that the equipment
is properly disposed of if he no longer wants to
keep the equipment. The old equipment can be
returned to a suitable collection point that will
dispose of the equipment in accordance with the
national recycling and waste disposal regulations.
This does not apply to any accessories or aids
without electrical components supplied with the
old equipment.

Specyfikacje produktu

Marka: Ozito
Kategoria: Wiertarka
Model: HDR-3000U

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Ozito HDR-3000U, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje Wiertarka Ozito

Ozito

Ozito BDP-500 Instrukcja

15 Października 2024
Ozito

Ozito PXDDS-200 Instrukcja

30 Września 2024
Ozito

Ozito BDP-450 Instrukcja

24 Września 2024
Ozito

Ozito HDR-1050U Instrukcja

20 Września 2024
Ozito

Ozito HDR-3000U Instrukcja

16 Września 2024
Ozito

Ozito HDR-1100U Instrukcja

15 Września 2024
Ozito

Ozito PXBHS-100U Instrukcja

15 Września 2024
Ozito

Ozito PXHDS-301U Instrukcja

15 Września 2024
Ozito

Ozito DP-350U Instrukcja

13 Września 2024
Ozito

Ozito CDL-1810U Instrukcja

7 Września 2024

Instrukcje Wiertarka

Najnowsze instrukcje dla Wiertarka

Einhell

Einhell BM-G1100 E Instrukcja

14 Października 2024
Sun Joe

Sun Joe 24V-DDK-LTX-PNK Instrukcja

14 Października 2024
DeWalt

DeWalt DWD450 Instrukcja

14 Października 2024
Black & Decker

Black & Decker GC1800 Instrukcja

13 Października 2024
Rupes

Rupes BH 252R Instrukcja

13 Października 2024
Makita

Makita HP2070 Instrukcja

13 Października 2024
Makita

Makita DHR263ZJ Instrukcja

12 Października 2024
Black & Decker

Black & Decker BDCDE120 Instrukcja

10 Października 2024
Gamma

Gamma BH-1500W Instrukcja

9 Października 2024
Flex

Flex IW 1/2" 1500 18-EC Instrukcja

9 Października 2024