Instrukcja obsługi Oreck Orbitor RORB400

Oreck nieskategoryzowany Orbitor RORB400

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Oreck Orbitor RORB400 (36 stron) w kategorii nieskategoryzowany. Ta instrukcja była pomocna dla 12 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/36
U ’ GSER S UIDE
•IMPORTANT•
SAVE THIS BOOKLET!
Includes:
• Safety Warnings
• Warranty
• Operating Instructions
• Trouble Diagnosis
• Accessories
ORBITER®
MULTI-FLOOR MACHINE
RORB400
RORB550
RORB600
RORB700
SERIES
S I M P L Y A M A Z I N G ®
USA: 1-800-989-3535
CANADA: 1-888-676-7325
COMMERCIAL: 1-800-242-1378
www.oreck.com
www.oreckcommercial.com
VISIT ONE OF OUR OVER
450 STORE LOCATIONS
53367-01 REV F
T Cable of ontents
BEFORE OPERATING
CLEANER, READ ALL
INSTRUCTIONS IN THIS
MANUAL CAREFULLY.
SAFETY & GENERAL INFORMATION . . . . . . 2
Important Safety Instructions . . . . . . . . . . . . . . . . 2
Grounding Information . . . . . . . . . . . . . . . . . . . . 3
Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Customer Service . . . . . . . . . . . . . . . . . . . . . . . . 4
INTRODUCTION . . . . . . . . . . . . . . . . . . . . . . . 4
GETTING STARTED . . . . . . . . . . . . . . . . . . . . . 4
Attaching Accessories . . . . . . . . . . . . . . . . . . . . 4
Removing Accessories . . . . . . . . . . . . . . . . . . . . 5
Turning Floor Machine On and Off . . . . . . . . . . . 5
To Guide the Floor Machine . . . . . . . . . . . . . . . . 5
CARPET & AREA RUG APPLICATIONS . . . . . 5
Dry Carpet Cleaning . . . . . . . . . . . . . . . . . . . . . 5
Bonnet Cleaning . . . . . . . . . . . . . . . . . . . . . . . . 5
LAMINATE, VINYL AND
LINOLEUM FLOOR APPLICATIONS . . . . . . . . 6
Sur . . . . . . . . . . . . . . . . . . . . . . . . 6face Cleaning
Scrubbing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Stripping . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Refinishing . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
SEALED HARDWOOD
FLOOR APPLICATIONS . . . . . . . . . . . . . . . . . 7
Surface Cleaning Sealed Floors . . . . . . . . . . . . . . 7
Sandscreening . . . . . . . . . . . . . . . . . . . . . . . . . . 8
WAXED HARDWOOD
FLOOR APPLICATIONS . . . . . . . . . . . . . . . . .8
Surface Cleaning and Waxing Hard Wood Floors 8
TILE FLOOR APPLICATIONS . . . . . . . . . . . . . . 8
Deep Cleaning . . . . . . . . . . . . . . . . . . . . . . . . .8
Light Cleaning . . . . . . . . . . . . . . . . . . . . . . . . . .9
STONE FLOOR APPLICATIONS . . . . . . . . . . . 9
Deep Cleaning . . . . . . . . . . . . . . . . . . . . . . . . .9
Marble Restoration . . . . . . . . . . . . . . . . . . . . . . . 9
CONCRETE & ASPHALT APPLICATIONS . . . . 10
Removing Oil & Dirt . . . . . . . . . . . . . . . . . . . . . .10
ACCESSORIES . . . . . . . . . . . . . . . . . . . . . . . . .
10
General . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Bonnets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10
Pads . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Brushes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Sand Screens . . . . . . . . . . . . . . . . . . . . . . . . . .11
MAINTENANCE & TROUBLESHOOTING . . . . 11
Care of your Oreck Floor Machine . . . . . . . . . . . 11
User Maintenance . . . . . . . . . . . . . . . . . . . . . . .11
Troubleshooting Guide . . . . . . . . . . . . . . . . . . . . 12
When using an electrical appliance, basic
precautions should always be followed,
including the following:
READ ALL INSTRUCTIONS BEFORE
USING THIS MULTI-FLOOR MACHINE
WARNING
To reduce the risk of fire,
electric shock, or injury:
IMPORTANT
SAFETY INSTRUCTIONS
• Use indoors only.
• Risk of explosion - Floor sanding can result in an
explosive mixture of fine dust and air. Use floor
sanding machine only in well ventilated area.
• Do not allow to be used as a toy. Close attention is
necessary when used by or near children.
• Do not leave appliance unattended when plugged
in. Unplug from outlet when not in use and before
servicing.
• Use only as described in this manual. Use only
manufacturer’s recommended attachments.
• Do not use with a damaged cord or plug. If
appliance is not working as it should, has been
dropped, damaged, left outdoors, or dropped into
water, return it to a service center or call customer
service at:
US: 1-800-989-3535 Canada: 1-888-676-7325
Commercial: 1-800-242-1378
• Do not pull or carry by cord, use cord as a handle,
close door on cord, or pull cord around sharp edges
or corners. Keep cord away from heated surfaces.
• Do not run cleaner over cord.
• Do not use on stairs.
• Connect to a properly grounded outlet only. See
grounding instructions.
• Unplug before installing or removing pads/cleaning
brushes.
• Warning - To reduce the risk of fire, use only
commercially available floor cleaners and waxes
intended for machine application.
• Do not unplug by pulling on cord. To unplug, grasp
the plug, not the cord.
• Do not handle plug or cleaner with wet hands.
• Do not put any object into openings. Do not use with
any opening blocked; keep free of dust, lint, hair
and anything that may reduce air flow.
• Keep hair, loose clothing, fingers and all parts of
body away from openings and moving parts.
• Turn off all controls before unplugging.
• Do not use appliance in an enclosed space where
flammable, explosive or toxic vapors are given off
by oil base paint, paint thinner, some mothproofing
substances, or in an area where flammable dust is
present.
Safety &
General Information
E N G L I S H
2
Grounding Information
s sCAUTION
This appliance must be grounded. If it should malfunction
or break down, grounding provides a path of least
resistance for electrical current to reduce the risk of electric
shock. This appliance is equipped with a cord having an
equipment-grounding conductor and grounding plug. The
plug must be inserted into an appropriate outlet that is
properly installed and grounded in accordance with all
local codes and ordinances.
sWARNING s
Improper connection of the equipment-grounding conductor
can result in a risk of electric shock. Check with a qualified
electrician or service person if you are in doubt as to
whether the outlet is properly grounded. Do not modify the
plug provided with the appliance - if it will not fit the outlet,
have a proper outlet installed by a qualified electrician.
This appliance is for use on a nominal 120-volt
circuit, and has a grounded plug that looks like the plug
illustrated in Sketch A (see next column). A temporary
adapter that looks like the adapter illustrated in Sketch B
(see next column) may be used to connect this plug to a
2-pole receptacle, if a properly grounded outlet is not
available. The temporary adapter should be used only until
a properly grounded outlet can be installed by a qualified
electrician. The green colored rigid ear, lug, or the like
extending from the adapter must be connected to a
permanent ground such as a properly grounded outlet box
cover. Whenever the adapter is used, it must be held in
place by a metal screw.
NOTE: In Canada, the use of a temporary adapter is not
permitted by the Canadian Electrical Code.
Grounding Methods
GROUNDED
OUTLET BOX
GROUNDING
PIN
Sketch A Sketch B
METAL
SCREW
GROUNDED
OUTLET
ADAPTER
Orbiter®Model 400, 600 & 700 is
intended for Household Use.
Orbiter®Model 550 is intended for
Commercial Use.
E N G L I S H
CAUTION
This appliance must be connected to a grounded
metal, permanent wiring system; or an
equipment-grounding conductor must be run with
the circuit conductors and connected to the
equipment-grounding terminal or lead on the
appliance.
ALWAYS UNPLUG THE MACHINE BEFORE
INSTALLING OR REMOVING ACCESSORIES.
ALWAYS WEAR SHOES WHEN USING
ELECTRICAL EQUIPMENT.
SAVE THESE INSTRUCTIONS
Warranty
Oreck Corporation (Oreck) gives you the following
limited warranty for this product only if it was originally
purchased for use, not resale, from Oreck or an ORECK
AUTHORIZED Dealer.
Oreck will repair or replace, free of charge, to the original
purchaser, any part, which is found to be defective in
material or workmanship within one (1) year of the date
of purchase for all models. Note: The 550 series Floor
Machine is intended for commercial use. Any commercial
use voids of the 400, 600 or 700 series voids the
warranty.
Components r ned prepaid to an Oreck Factoryetur
Authorized Service Center or to Oreck will be repaired or
replaced free of cost at the option of Oreck and/or its
service center when upon examination by either of them,
such components are found to be defective.
Brushes, pads, drive blocks and other parts are subject to
normal wear and are not covered by this limited warranty.
This limited warranty does not apply to any part subjected
to accident, abuse, alteration, misuse, damage caused by
fire or act of God, the use of voltages other than indicated
on the serial number plate of this product, or service of this
product by other than Oreck or an Oreck Factory
Authorized Service Center.
Oreck does not authorize any person or representative to
assume or grant any other warranty obligation in
connection with the sale of this product.
Oreck's limited warranty is valid only if you retain proof of
purchase from Oreck or an Oreck authorized retail dealer
of this product. If you purchase this product from any other
source, your purchase is “AS IS”, which means that Oreck
grants to you no warranty and that you, not Oreck,
assume the entire risk of the quality and performance of
this product, including the entire cost of any necessary
servicing or repairs of any defects.
3

Specyfikacje produktu

Marka: Oreck
Kategoria: nieskategoryzowany
Model: Orbitor RORB400

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Oreck Orbitor RORB400, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje nieskategoryzowany Oreck

Oreck

Oreck Grab-It & Steam-It Instrukcja

10 Sierpnia 2024
Oreck

Oreck SurfaceScrub FK40100PC Instrukcja

10 Sierpnia 2024
Oreck

Oreck Steam 75 Instrukcja

10 Sierpnia 2024
Oreck

Oreck Orbitor RORB400 Instrukcja

10 Sierpnia 2024
Oreck

Oreck M900 Instrukcja

10 Sierpnia 2024
Oreck

Oreck Lowboy LB8005 Instrukcja

10 Sierpnia 2024
Oreck

Oreck RinseAMatic XLS70 Instrukcja

10 Sierpnia 2024
Oreck

Oreck Lowboy LB8000 Instrukcja

10 Sierpnia 2024
Oreck

Oreck Orbiter 550 Instrukcja

10 Sierpnia 2024
Oreck

Oreck Zip Vac Ultra ZIP100 Instrukcja

18 Czerwca 2024

Instrukcje nieskategoryzowany

Najnowsze instrukcje dla nieskategoryzowany

Asko

Asko DBI644MIB.S.TW/1 Instrukcja

28 Października 2024
Asko

Asko DFS233IB.S.TW/1 Instrukcja

28 Października 2024
Emko

Emko EZM-9920 Instrukcja

27 Października 2024
Emko

Emko ESM-3712-H Instrukcja

27 Października 2024
Emko

Emko ATS-10 Instrukcja

27 Października 2024
Emko

Emko EAOM-11.2 Instrukcja

27 Października 2024
Emko

Emko EPM-3790 Instrukcja

27 Października 2024
Emko

Emko EPM-7790 Instrukcja

27 Października 2024
Livarno Lux

Livarno Lux IAN 108340 Instrukcja

27 Października 2024
Livarno Lux

Livarno Lux HG06009A-BS Instrukcja

27 Października 2024