Instrukcja obsługi Oreck Lowboy LB8005

Oreck nieskategoryzowany Lowboy LB8005

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Oreck Lowboy LB8005 (4 stron) w kategorii nieskategoryzowany. Ta instrukcja była pomocna dla 2 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/4
USER’SGUIDE
•IMPORTANT•
SAVE THIS BOOKLET!
Includes:
• Safety Warnings
• Warranty
• Operating Instructions
• Trouble Diagnosis
• Accessories
LB8005
S I M P L Y A M A Z I N G ™
LOW BOY
INDUSTRIAL
FLOOR MACHINE
2
BEFORE OPERATING CLEANER,
READ ALL INSTRUCTIONS IN
THIS MANUAL CAREFULLY.
Table of Contents
Maintenance and Customer Service, Accessories, Caution,
Important Safety Instructions . . . . . . . . . . . . . . . . . . . . . . . . . page 2
Grounding Instructions, Warranty . . . . . . . . . . . . . . . . . . . . . page 3
Operating Instructions, Troubleshooting Guide . . . . . . . . . . . page 4
Maintenance and Customer Service
Your Oreck Low Boy is a product of precise engineering. The motor
bearings are permanently lubricated and should not be oiled. If you
require additional information or have problems with your Oreck
appliance, you may call ORECK customer service at:
0800 67 68 69
Please specify the model number and serial/code number which can be
found on the data plate on the back of the vacuum.
Save your sales or purchase slip. Should your Oreck appliance require
warranty service in the U.S.A., present this slip to the Authorized Service
Center as your proof of purchase date or, in Canada, call customer
service.
Accessories
ITEM PART #
1. Green Bristle Holder: included with machine. 53304-01
2. Drive Pad Holder 53269-51-0327
3. Scrub Brush: Hard Surface cleaning. 82001
4. NY/LO Grit 82003
5. Carpet Bonnet 82008
6. Lambs Wool Bonnet 82009
7. Pad, Black 82004
8. Pad, White 82005
9. Pad, Brown 82006
CAUTION
This appliance must be connected to a grounded metal, permanent
wiring system; or an equipment-grounding conductor must be run with
the circuit conductors and connected to the equipment-grounding
terminal or lead on the appliance.
ALWAYS UNPLUG THE MACHINE BEFORE INSTALLING OR
REMOVING ACCESSORIES. ALWAYS WEAR SHOES WHEN USING
ELECTRICAL EQUIPMENT.
When using an electrical appliance, basic
precautions should always be followed,
including the following:
READ ALL INSTRUCTIONS BEFORE
USING THIS FLOOR MACHINE
WARNING
To reduce the risk of fire,
electric shock, or injury:
IMPORTANT SAFETY
INSTRUCTIONS
• Use indoors only.
• Risk of explosion - Floor sanding can result in an
explosive mixture of fine dust and air. Use floor sanding
machine only in well ventilated area.
• Do not allow to be used as a toy. Close attention is
necessary when used by or near children.
• Do not leave appliance unattended when plugged in.
Unplug from outlet when not in use and before servicing.
• Use only as described in this manual. Use only manufac-
turer’s recommended attachments.
• Do not use with damaged cord or plug. If appliance is not
working as it should, has been dropped, damaged, left
outdoors, or dropped into water, return it to a service
center or call customer service at: 0800 67 68 69
• Do not pull or carry by cord, use cord as a handle, close
door on cord, or pull cord around sharp edges or corners.
Keep cord away from heated surfaces.
• Do not run appliance over cord.
• Use extra care when cleaning on stairs.
• Connect to a properly grounded outlet only. See
grounding instructions.
• Unplug before installing or removing pads/cleaning
brushes.
• Warning - To reduce the risk of fire, use only commer-
cially available floor cleaners and waxes intended for
machine application.
• Do not unplug by pulling on cord. To unplug, grasp the
plug, not the cord.
• Do not handle plug or appliance with wet hands.
• Do not put any object into openings. Do not use with any
opening blocked; keep free of dust, lint, hair and anything
that may reduce air flow.
• Keep hair, loose clothing, fingers and all parts of body
away from openings and moving parts.
• Turn off all controls before unplugging.
• Do not use appliance in an enclosed space where
flammable, explosive or toxic vapors are given off by oil
base paint, paint thinner, some mothproofing substances,
or in an area where flammable dust is present.
• Only use the brushes provided with the appliance or
those specified in the instruction manual. The use of other
brushes may impair safety.
• The appliance is suitable for commercial use, for example
in hotels, schools, hospitals, factories, shops, offices and
rental businesses.
SAVE THESE INSTRUCTIONS
3
Low Boy Model LB8005 is
intended for Commercial Use.
IMPORTANT:
Where Necessary for Plug to be Fitted
The wires in this mains lead are coloured in accordance with the
following code:
Blue: Neutral Brown: Live Green: Earth
As the colours of the wires in the mains lead of this appliance may not
correspond with the coloured markings identifying the terminals in your
plug, proceed as follows;
The wire which is coloured Blue must be
connected to the terminal which is
marked with the letter or colouredN
Black.
The wire which is coloured Brown must
be connected to the terminal which is
marked with the letter or coloured Red.L
Green is to be connected to the earth pin
of the 3 pin plug.
The wire which is coloured Green must
be connected to the terminal which is
marked with the letter E.
If a 13 amp plug is fitted, fit a 13 amp fuse.
Warranty
ORECK MANUFACTURING COMPANY: (ORECK gives you the
following limited warranty for this product only if it was originally
purchased for use, not resale, from ORECK or an ORECK Authorized
Retail Dealer.)
ORECK will repair or replace, free of charge, to the original purchaser,
any part which is found to be defective in material or workmanship
within one (1) year of the date of original purchase.
PAD DRIVER, CARPET BONNET, LAMBS WOOL BONNET,
BRUSHES, PADS and other parts subject to normal wear are not
covered by this limited warranty.
This limited warranty does not apply to any part subjected to accident,
abuse, or alteration, misuse, damage caused by fire or act of God, the
use of voltages other than indicated on the serial number plate of this
product or service of this product by other than ORECK or an ORECK
Factory Authorized Service Center.
ORECK does not authorize any person or representative to assume or
grant any other warranty obligation with the sale of this product.
ORECK’S limited warranty is valid only if you retain proof of purchase
from ORECK or an ORECK Authorized Retail Dealer for this product. If
you purchase this product from any other source, your purchase is “AS
IS,” which means ORECK grants you no warranty, and that you, not
ORECK, assume the entire risk of the quality and performance of this
product, including the entire cost of any necessary servicing or repairs
of any defects.
ORECK’S liability for damages to you for any costs whatsoever arising
out of this statement of limited warranty shall be limited to the amount
paid for this product at the time of original purchase, and ORECK shall
not be liable for any direct, indirect, consequential or incidental
damages arising out of the use or inability to use this product.
Some states do not allow the exclusion or limitation of incidental or
consequential damages, so the above limitation or exclusion may not
apply to you.
ALL EXPRESS AND IMPLIED WARRANTIES FOR THIS PRODUCT,
INCLUDING IMPLIED WARRANTIES OF MERCHANTABILITY AND
FITNESS FOR A PARTICULAR PURPOSE, ARE LIMITED IN
DURATION TO THE WARRANTY PERIOD, AND NO WARRANTIES,
WHETHER EXPRESS OR IMPLIED, WILL APPLY AFTER THIS
PERIOD.
Some states do not allow limitations on the duration of implied
warranties, so the above limitation may not apply to you.
This warranty gives you specific legal rights, and you may also have
other rights which vary from state to state.
BLUE
BROWN
GREEN
13 AMP
N
E
L
CORD CLAMP
13 AMP FUSE

Specyfikacje produktu

Marka: Oreck
Kategoria: nieskategoryzowany
Model: Lowboy LB8005

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Oreck Lowboy LB8005, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje nieskategoryzowany Oreck

Oreck

Oreck Grab-It & Steam-It Instrukcja

10 Sierpnia 2024
Oreck

Oreck SurfaceScrub FK40100PC Instrukcja

10 Sierpnia 2024
Oreck

Oreck Steam 75 Instrukcja

10 Sierpnia 2024
Oreck

Oreck Orbitor RORB400 Instrukcja

10 Sierpnia 2024
Oreck

Oreck M900 Instrukcja

10 Sierpnia 2024
Oreck

Oreck Lowboy LB8005 Instrukcja

10 Sierpnia 2024
Oreck

Oreck RinseAMatic XLS70 Instrukcja

10 Sierpnia 2024
Oreck

Oreck Lowboy LB8000 Instrukcja

10 Sierpnia 2024
Oreck

Oreck Orbiter 550 Instrukcja

10 Sierpnia 2024
Oreck

Oreck Zip Vac Ultra ZIP100 Instrukcja

18 Czerwca 2024

Instrukcje nieskategoryzowany

Najnowsze instrukcje dla nieskategoryzowany

Asko

Asko DBI644MIB.S.TW/1 Instrukcja

28 Października 2024
Asko

Asko DFS233IB.S.TW/1 Instrukcja

28 Października 2024
Emko

Emko EZM-9920 Instrukcja

27 Października 2024
Emko

Emko ESM-3712-H Instrukcja

27 Października 2024
Emko

Emko ATS-10 Instrukcja

27 Października 2024
Emko

Emko EAOM-11.2 Instrukcja

27 Października 2024
Emko

Emko EPM-3790 Instrukcja

27 Października 2024
Emko

Emko EPM-7790 Instrukcja

27 Października 2024
Livarno Lux

Livarno Lux IAN 108340 Instrukcja

27 Października 2024
Livarno Lux

Livarno Lux HG06009A-BS Instrukcja

27 Października 2024