Instrukcja obsługi Omega OG90XA

Omega piec OG90XA

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Omega OG90XA (12 stron) w kategorii piec. Ta instrukcja była pomocna dla 14 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/12
installation
and operating
instructions
OG90XA
cooktop
Dear customer,
We thank you and congratulate you on
your choice.
This new carefully designed product,
manufactured with the highest quality
materials, has been carefully tested to sa-
tisfy all your cooking demands.
We would therefore request you to read
and follow these easy instructions which
will allow you to obtain excellent results
right from the start.
May we wish you all the very best with
your modern appliance!
THE MANUFACTURER
APPLIANCE CONCEIVED FOR DOMESTIC USE IS
ONLY. THE MANUFACTURER SHALL NOT IN ANY
WAY BE HELD RESPONSIBLE FOR WHATEVER
INJURIES OR DAMAGES ARE CAUSED BY
INCORRECT ,INSTALLATION OR BY UNSUITABLE
WRONG OR ABSURD USE .
- The appliance is not intended for use by young children or infirm
persons without supervision.
- Young children should be supervised to ensure that they do not play
with the appliance.
- If the supply cord is damaged, it must be replaced by the manufacturer
or its service agent or a similarly qualified person in order to avoid a
hazard.
- If a stationary appliance is not provided with a supply cord and a plug
or with other means for disconnection from the supply having an air gap
contact separation in all active (phase) conductors, the instructions shall
state that such means for disconnection shall be incorporated in the fixed
wiring according to the wiring rules.
3
Fig. 1
wok Ø 20-32
fast Ø 20-26
semifast Ø 14-20
auxiliary Ø 10-14
INSTRUCTIONS FOR USE
FOR VITROCERAMIC HOBS SEE ADDITIONAL INSTRUCTIONS
Installation
All the operations concerned with the installation (electrical connection) must be
carried out by qualified technicians, in terms with the standards in force.
For specific instructions, kindly read the part reserved for the installation technician.
Use
Gas burners (Fig. 1-1a-1b).
The ignition of the gas burner is carried out by putting a small flame to the upper part
holes of the burner, pressing and rotating the corresponding knob in an anti-clockwise
manner, until the maximum position has coincided with the marker. When the gas
burner has been turned on, adjust the flame according to need. The minimum position
is found at the end of the anti-clockwise rotation direction.
In models with automatic ignition, operate the knob as described above, pressing
simultaneously, the corresponding push-button. The electric spark between the
ignition plug and the burner provides the ignition of the burner itself. After ignition,
immediately release the push-button and adjust the flame according to need.
To start the burner in models equipped with a thermoelectric resistance keep the knob
pressed hard for 10 seconds, as described above, after placing it on its maximum value.
After releasing the knob, make sure the burner is actually lit.
N.B. - we recommend the use of pots and pans with a diameter matching that of the
burner, thus preventing the flame from escaping from the bottom part and
surrounding the pot
- do not leave any empty pots or pans on the fire
- do not use any tools for grill-cooking on Crystal hobs.
When cooking is finished, it is also a good norm to close the main gas pipe tap and
cylinder.
GAS


Specyfikacje produktu

Marka: Omega
Kategoria: piec
Model: OG90XA

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Omega OG90XA, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje piec Omega

Omega

Omega OCG63FFX Instrukcja

12 Czerwca 2024
Omega

Omega OC64KB Instrukcja

12 Czerwca 2024
Omega

Omega OCC64TZ Instrukcja

12 Czerwca 2024
Omega

Omega OCI64Z Instrukcja

12 Czerwca 2024
Omega

Omega OC64TZ Instrukcja

12 Czerwca 2024
Omega

Omega OG64XA Instrukcja

12 Czerwca 2024

Instrukcje piec

Najnowsze instrukcje dla piec

Miele

Miele KM 7404 FX Instrukcja

9 Października 2024
Proctor Silex

Proctor Silex 37533 Instrukcja

1 Października 2024
Siemens

Siemens ED651HSB1E Instrukcja

23 Września 2024
Siemens

Siemens ER7EA233HK Instrukcja

23 Września 2024
Siemens

Siemens ER3A6AD70A Instrukcja

22 Września 2024
Atag

Atag HIDD08471EVX Instrukcja

21 Września 2024
GE

GE JGS760FPDS Instrukcja

19 Września 2024
ARC

ARC CI6SE2 Instrukcja

18 Września 2024
ARC

ARC CD7SG1 Instrukcja

18 Września 2024
Schneider

Schneider SVI 316C Instrukcja

17 Września 2024