Instrukcja obsługi NUVO Odeon 60/2855

NUVO Lampa Odeon 60/2855

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla NUVO Odeon 60/2855 (1 stron) w kategorii Lampa. Ta instrukcja była pomocna dla 2 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/1
ODEON ASSEMBLY INSTRUCTIONS
GENERAL:
Carefully unpack the xture, you should receive:
mounting hardware, fixture assembly, glass assembly.
FIXTURE ASSEMBLY: (see FIG.1)
STEP 1: Secure mounting bar (A) to outlet box with outlet box
screws (B).Thread nut (D) onto nipple (E) so that five
threads are exposed above nut (D). Insert lock washer
(C) and thread nipple (E) into mounting bar (A), then
secure with nut (D).
STEP 2: Slide collar ring (G) and canopy (F) over chain (I).
Thread collar ring (G) onto nipple (E). Weave the fixture
wire and the ground wire through the chain links (I).
Open key link-2 (J), connect it to xture loop (K) and
close the key link-2 (J). Open key link-1 (H), connect it
to collar ring (G) and close the key link-1 (H).
BE SURE TO CLOSE ALL CHAIN LINKS COMPLETELY.
STEP 3: Lace wires up through chain (I) and pass wires through
holes in collar ring (G). We recommend lacing wire up
through every other link of chain (I).
STEP 4: After wires are connected, tuck them carefully inside
outlet box, then secure canopy (F) with collar ring (G).
STEP 5: Place glass (A1) to glass frame (X), then place glass
frame (X) and cups (Y) to socket (W), secure with
retaining ring (Z).
NOTE: This fixture has two methods of installation: one is
ARMS/GLASS facing upward, the other one
ARMS/GLASS facing adown. (Remark: Tube (O1),
tube (T1) are standby.)
The xture ships with the ARMS/GLASS in the
upward positions:
To disassembly: (see FIG.2)
If you select an ARMS/GLASS facing down installation,
please follow the steps listed below.
STEP 1: Unscrew fixture loop (K), iron washer (L), nipple (M),
tube (O) in order, pull apart cable connector (P), pull
apart cable connector (Q), take out tube (O) place to the
side.
STEP 2: Unscrew nipple (V), coupling (U), tube (T) in order, take
out tube (T) place to the side.
STEP 3: Flip over fixture arms (N) 180 degrees so the arms now
down.
Arms/Glass Assembly: (see FIG.3)
STEP 1: Insert cable connector (P) to cable connector (Q2),
cable connector (Q) to cable connector (P2), screw tube
(O1) to coupling (R), place nipple (M) through the hole
of fixture arms (N) and screw it to tube (O1), place iron
washer (L), screw fixture loop (K) to nipple (M) until
tight.
STEP 2: Screw coupling (U) to tube (T1), then place tube (T1)
through the hole of fixture arms (N) and screw it to
coupling (S), screw nipple (V) to coupling (U).
STEP 3: Repeat installation for step 1 to step 5.
ITEM NO: 60-2855, 60-2856
FIG.1
FIG.2
FIG.3


Specyfikacje produktu

Marka: NUVO
Kategoria: Lampa
Model: Odeon 60/2855

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z NUVO Odeon 60/2855, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje Lampa NUVO

Instrukcje Lampa

Najnowsze instrukcje dla Lampa