Instrukcja obsługi Neumann LH 64

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Neumann LH 64 (2 stron) w kategorii luidsprekersteun. Ta instrukcja była pomocna dla 3 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/2
LH 64 Mounting manual
Important safety and
mounting instructions
EN
Read and follow the safety and mounting instructions, keep these
instructions easily accessible and always include them when pas-
sing the LH64 on to third parties.
Also read and follow the installation instructions contained in the
operating manual of the studio monitor to be mounted.
-When mounting, follow the local, national and international regu
lations and standards.
Intended use
The LH64 is a holder for fastening KH 80 DSP, KH 120, KH 120 II and
KH 150 studio monitors to a 75×75 VESA mount. The LH64 is only
suitable for the above-mentioned 2-way monitors and must only be
used indoors in dry, clean rooms such as studios.
To properly mount the LH64 together with a studio monitor, you need
additional products from the VESA75×75 range of accessories, as
well as additional fastening elements for mounting on the wall or a
surface.
The LH64 must not be used for other purposes or in other environ-
ments. In case of any damage or any deviation from the safety and
mounting instructions, immediately dismount the studio monitor and
the LH64.
Required qualications
Only skilled personnel may attach the LH64 to the studio monitor and
mount it on the wall. Due to his/her technical training, know-how and
experience as well as knowledge of relevant provisions, regulations
and standards, the specialist must be able to assess assigned tasks,
recognize potential hazards and ensure appropriate safety measures.
Safety instructions for mounting
Mount only one LH64 to a studio monitor, as described in these
assembly instructions. Centred suspension is recommended, see
Figure1a. When using the cinch sockets, the side suspension must
be used, see Figure1b.
Place something soft underneath the studio monitor so that you do
not scratch its surface while performing the work.
Always use the enclosed original accessories.
The wall or surface must be able to support the weight of the studio
monitor and all accessories used, such that no parts will fall even
if someone pulls hards on the power or audio cables. When calcu-
lating the weight, also take into account the additional leverage.
When mounting the LH 64 on the wall or surface, use products
from the range of accessories, as well as fastening VESA75× 75
elements (not included with delivery) that are suciently dimensi-
oned to ensure that the entire weight is held securely.
Tighten all screws by hand. Once you have finished mounting and
aligning the studio monitor, ensure that all screws are firmly tigh-
tened.
Do not use the LH64 in environments that are exposed to external
vibrations.
Every 3 months, check that all screws are properly tightened and
that the LH64, the studio monitor, the mounting accessories and
the wall on which the LH64 is mounted are in the proper condition.
Package contents
A: 1 × adapter plate
B: 2 × Allen screws, M8×12
C: 2 × Allen screws, M6×12
D: 1 × Allen key, 4mm
E: 1 × Allen key, 5mm
Specications
Weight 0.2kg
Dimensions when assembled 96×98×22,5mm (H × W × D)
Max. load 10kg
Guarantee
For the current terms and conditions of the product guarantee
please visit www.neumann.com.
   ·  .  ·   ·  / · /
  () /   - ·  - · @. · ..
LH 64
Mounting manual
1a
2
1b
B = KH 120
C = KH 80 DSP/
KH 150
B = KH 120
C = KH 80 DSP/
KH 150
C
B/C
D/E
A
B/C
D/E
A
D
B
E
A

Specyfikacje produktu

Marka: Neumann
Kategoria: luidsprekersteun
Model: LH 64

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Neumann LH 64, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą