Instrukcja obsługi Neumann LH 47

Neumann obsługa głośników LH 47

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Neumann LH 47 (2 stron) w kategorii obsługa głośników. Ta instrukcja była pomocna dla 5 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/2
LH 47 Mounting manual
Important safety and mounting instructions
• Have the product mounted by a specialist.
• Due to his/her technical training, know-how and experience as well
as knowledge of relevant provisions, regulations and standards, the
specialist must be able to assess assigned tasks, recognize poten-
tial hazards and ensure appropriate safety measures. The following
safety and mounting instructions are addressed to this specialist.
•
Read and follow the safety and mounting instructions, keep these
instructions and always include them when passing the LH 47 on
to third parties.
•
Also read and follow the installation instructions contained in the
operating manual of the mounted loudspeaker.
• -When mounting, observe and follow the local, national and interna
tional regulations and standards.
•
Only mount loudspeakers in combination with other accessories from
the Neumann mounting hardware range to the LH 47 (see below).
•
Only mount one loudspeaker with a maximum weight of 65 kg
(143.3 lbs) to the LH 47.
•
Do not install the LH 47 in locations where it is exposed to externally
generated vibrations.
• Always use the original supplied parts.
In the following you will be asked to combine other acces-
sories from the Neumann mounting hardware range with the
LH 47. Download the PDF file Hardware Mounting Matrix“ ”
from www.neumann.com. Only combine the Neumann moun-
ting hardware as specified in the Hardware Mounting Matrix“ ”.
•
First attach a Neumann mounting hardware that features a cylinder-
shaped holder (e.g. LH 43, 45, 46) to a vertical or horizontal surface.
Follow the safety and mounting instructions contained in the operat-
ing manual of the selected mounting hardware.
Horizontal surfaces must be able to carry the weight of all parts
used plus the weight of the loudspeaker. With vertical surfaces,
you additionally have to consider the leverage.
•
Fasten your loudspeaker to a Neumann mounting hardware that is
also suitable for mounting to the LH47 (e.g. LH25, LH 42, 61, refer LH
to the Hardware Mounting Matrix ). Follow the safety and mount“ ” -
ing instructions contained in the operating manual of the selected
mounting hardware.
•
Next attach the LH 47 to the mounting hardware/loudspeaker
combination (see fi . 1).
–
If di erent mounting positions are possible, choose mounting
points that minimize leverage when the loudspeaker is tilted.
– Tighten the nuts with a torque of 2 m.0N
•
Now mount the LH 47 onto the cylinder-shaped holder F of the
Neumann mounting hardware. To do so, proceed as shown in fi .2.
CAUTION!
Danger of injury and material damage
due to dropping of the loudspeaker
Unless the LH 47 is properly fastened to the cylinder-shaped
holder, the loudspeaker together with the mounting hardware
can drop down.
XHave the loudspeaker held by a second specialist who is
physically able to do so. The requirements mentioned ear-
lier also apply to this specialist.
XWhen mounting the loudspeaker, provide a sufficien addi-
tional protection against dropping.
– Position the locking ring of the cylinder-shaped holder in the
F
upper position and tighten the 4 Allen screws so that the locking
ring cannot work loose and fall o .
– Place the LH 47 onto the cylinder-shaped holder F as shown in
gs. 2, 3 and 4.
– Loosen th llen screws of the locking ring (see  g. 5a). e 4A
– Lower the locking ring into position (see  g 5b).
– Tighten the 4 Allen screws with a torque of 1 Nm. The LH 47 is 5
now properly fastened to the cylinder-shaped holder F.
•
Use safety wires to additionally protect the loudspeaker and the
mounting hardware against dropping. The safety wires, rope ter-
minations and coupling links must comply in their dimensioning
and condition with the regulations and standards of the country in
which they are used and must reliably prevent dropping of a load
of 65 kg (143.3 lbs).
• Make sure that ...
– you use both screws C to fasten the LH 47 to suitable Neumann
mounting hardware;
–
the surface to which you fasten the Neumann mounting hardware
cannot tip over or drop down;
–
the LH 47, the associated mounting hardware and the loudspeaker
cannot tip over or drop down, even if the power or audio cables
are pulled;
–
you check every 3 months if all screws are properly tightened and
if the LH 47 and associated mounting hardware, additional fasten-
ing elements, as well as the loudspeaker are in proper condition.
In case of any damage or any deviation from the safety and mounting
instructions, immediately dismount the loudspeaker, the LH 47 and
the additional mounting hardware used.
Delivery includes
A: 1 x LH 47 mounting
adapter plate
B: 4 x washers
C: 2 x M8x25 screws
D: 2 x lock washers
E: 2 x M8 nuts
Specification
Weight 250 g (0.6 lbs)
Dimensions 16 x 145 x 80 mm
(H x W x D)
x 5 x 3 ⅝”¾”⅛”
(H x W x D)
Max. load 65 kg (143.3 lbs)
Guarantee
For the current terms and conditions of the product guarantee please
visit www.neumann.com.
GEORG NEUMANN GMBH · LEIPZIGER STR. 112 · 10117 BERLIN · GERMANY 10/15 · 544942/ A02
TEL +49 (0)30 / 41 77 24-0 · FAX -50 · HEADOFFICE@NEUMANN.COM · WWW.NEUMANN.COM
Mounting Adapter Plate
A
B
D
E
B
C
B
D
E
B
C
B
D
E
A
C
1
2
F
3
4 5
5a
5b
15 Nm
20 Nm
Example:
LH25

Specyfikacje produktu

Marka: Neumann
Kategoria: obsługa głośników
Model: LH 47

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Neumann LH 47, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje obsługa głośników Neumann

Neumann

Neumann LH 47 Instrukcja

5 Października 2024
Neumann

Neumann LH 64 Instrukcja

5 Października 2024
Neumann

Neumann LH 61 Instrukcja

5 Października 2024
Neumann

Neumann LH 46 Instrukcja

5 Października 2024
Neumann

Neumann REK 4 Instrukcja

4 Października 2024
Neumann

Neumann LH 48 Instrukcja

7 Maja 2024

Instrukcje obsługa głośników

Najnowsze instrukcje dla obsługa głośników

Extron

Extron V-Lock Instrukcja

9 Października 2024
Extron

Extron SMK VRE 48 Instrukcja

9 Października 2024
Sanus

Sanus BSWM3IWP Instrukcja

8 Października 2024
Sanus

Sanus WSWM3IWP Instrukcja

8 Października 2024
Valcom

Valcom V-9915M Instrukcja

8 Października 2024
Valcom

Valcom V-9912M Instrukcja

8 Października 2024
Valcom

Valcom V-9910 Instrukcja

8 Października 2024
Valcom

Valcom V-9904M-5 Instrukcja

8 Października 2024
Valcom

Valcom V-9806 Instrukcja

8 Października 2024
Valcom

Valcom V-936480 Instrukcja

8 Października 2024