Instrukcja obsługi Nedis WIFIDS10WT

Nedis Detektor dymu WIFIDS10WT

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Nedis WIFIDS10WT (58 stron) w kategorii Detektor dymu. Ta instrukcja była pomocna dla 4 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/58

WIFIDS10xx

Wi-Fi smoke and heat detector

Quick Start Guide (EN)

Verkorte handleiding (NL)

Kurzanleitung (DE)

Guía de inicio rápido (ES)

Guide de démarrage rapide (FR)

Guida rapida (IT)

Guia de iniciação rápida (PT)

Hurtigstartsguide (DA)

Hurtigstartsguide (NO)

Snabbstartsguide (SV)

Pikaopas (FI)

Γρήγορος οδηγός (EL)

Krótki przewodnik (PL)

Rychlá příručka (CS)

Gyors útmutató (HU)

Ghid rapid (RO)

Руководство быстрого старта (RU)

Hızlı başlangıç kılavuzu (TR)

1 2 3

50cm 50cm

English

WIFIDS10xx

Wi-Fi smoke and heat detector

Description (g. A)

The smoke and heat detector is a device used to detect

smoke and heat. The device does not detect gas. The

device is suitable for indoor use only. If the device

detects smoke or heat, the alarm will sound and the LED

indicator will ash red continuously until it is eliminated.

1. Test button

2. LED indicator

3. Siren

4. Smoke intake

5. Mounting plate

Safety

• Read the manual carefully before use. Keep the

manual for future reference.

• Only use the device for its intended purposes. Do not

use the device for other purposes than described in

the manual.

• Do not use the device if any part is damaged or

defective. If the device is damaged or defective,

replace the device immediately.

• The device has a limited lifetime. Replace the device

10 years after the date of purchase. Write the

purchase date on the manual for future reference.

Battery safety

• Use only the batteries mentioned in the manual.

• Do not use old and new batteries together.

• Do not use batteries of dierent types or brands.

• Do not install batteries in reverse polarity.

• Do not short-circuit or disassemble the batteries.

• Do not expose the batteries to water.

• Do not expose the batteries to re or excessive heat.

• Batteries are prone to leakage when fully discharged.

To avoid damage to the product, remove the

batteries when leaving the product unattended for

longer periods of time.

• If liquid from the batteries comes into contact with

skin or clothing, immediately rinse with fresh water.

Installation (g. B)

Warning!

• Do not use the device outdoors.

• Do not expose the device to water or moisture.

• Install the device out of the reach of children.

• Install at least one device at each oor level.

Preferably install one device in each recommended

area.

• Do not install the device in bathrooms, toilets or

other rooms where the device can be triggered by

steam or condensation. Install the device at least 3

meters away from these rooms.

• Do not install the device in rooms where normal

combustion occurs regularly.

• Do not install the device in rooms with temperatures

below 5 °C or above 37 °C.

• Do not install the device in dusty or dirty

environments.

• Do not install the device near doors and windows.

• Do not install the device near radiators or air vents in

walls or ceilings.

• Do not install the device behind curtains or furniture.

• Do not use rechargeable batteries in order to prevent

malfunctions.

• Do not paint the device.

1. Download, install and launch the app “Nedis

SmartLife” from the Apple App Store or Google Play

Store on your mobile device.

2. Create a new account or log in to your existing

account.

3. Tap “+” to add the device.

4. Select the correct product from the list.

5. Place the batteries (2x AA, alkaline) into the battery

compartment.

6. Press the test button 3 times in 2 seconds.

7. When the LED is turned on, conrm in the app.

8. Conrm the Wi-Fi network and password.

9. Enter the device name.

10. Mount the device to the mounting plate. Refer to the

illustrations for the correct positioning of the device.

11. Test the alarm. Refer to the section “Testing the

alarm”.

Specyfikacje produktu

Marka:	Nedis
Kategoria:	Detektor dymu
Model:	WIFIDS10WT
Kolor produktu:	Biały
Źródło zasilania:	Bateria
Technologia łączności:	Bezprzewodowy
Zakres temperatur (eksploatacja):	5 - 37 °C
Rodzaj baterii:	AA
Napięcie:	3 V
Częstotliwość danych wejściowych:	2.412 - 2.484 Hz
Liczba baterii:	2
Zgodne rodzaje baterii:	AA
Urządzenia alarmujące o decybelach:	90 dB