Instrukcja obsługi NEC NP03CM

NEC Akcesoria do projektora NP03CM

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla NEC NP03CM (16 stron) w kategorii Akcesoria do projektora. Ta instrukcja była pomocna dla 6 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/16

Portable Projector

NP03CM Ceiling Mount Unit

Installation and Adjustment Manual

Thank you for your purchase of the NEC portable projector ceiling mount unit.

Please read this installation and adjustment manual carefully to ensure proper use.

Special skills are required for the installation of the portable projector.

This work should never be performed by the customer.

To the Dealer and the Installer

For the safety of the customer, we ask that the installation work be started

after careful attention is paid to the strength of the mounting location to be

sure it will withstand the weight of the portable projector and mounting

hardware.

Printed in Japan

NP03CM-0604K-02

CONTENTS

Heed the Following ....................................................................................2

Preparation ..................................................................................................4

List of Packaged Parts ......................................................................................4

Required Tools...................................................................................................4

Names of the Parts ............................................................................................4

Dimensions ........................................................................................................4

Guide to Screen Size and Projector Mounting Position..........................5

Screen Size and Projection Distance

(VT580/VT480/VT57/VT595/VT590/VT491/VT490/VT59)

........5

Screen Size and Projection Distance

(VT48/VT49)

................................................................6

Screen Size and Projection Distance

(VT695)

......................................................................7

Screen Size Conversion Table .........................................................................8

Mounting the Projector...............................................................................9

Replacing the Lamp ..................................................................................12

Adjustment of the Projection Angle ........................................................13

Distortion Adjustment .....................................................................................13

Fine Adjustment...............................................................................................15

Specifications............................................................................................15

PRINTED WIT H

SOY INK

T M

Printed on recycled paper.

Heed the Following

• When installing the projector, be sure to

do so as explained in this manual. The

projector may fall and cause injury if it is

installed improperly.

• To prevent the projector from falling, install

it in a place and fasten it in a way with

sufficient strength to support the combined

weight (4.9 kg) of the projector (2.9 kg)

and the ceiling mount unit (2.0 kg) for an

extended period of time as well as to

withstand earthquakes. Insufficient

strength or fastening may result in the

projector falling and causing injury.

• To ensure safety, be sure to tighten the

bolts and screws securely. Also be sure to

use the included units and other metal

fittings. Failure to do so may result in the

projector falling and causing injury.

• When sliding the opening of the mounting

adapter over the pin of the ceiling

attachment unit, check that the pin of the

ceiling attachment unit is fully seated in

the opening. If not, the projector may fall

and cause injury.

• Do not modify any parts. Doing so may

result in the projector falling and causing

injury.

WARNING

• Do not use broken parts. Doing so may

result in the projector falling and causing

injury. If a part should be broken, consult

your dealer.

• Do not look into the lens when the

projector is turned on. Doing so could

damage your eyesight.

• Make adjustments as described in this

manual.

Incorrect adjustments may result in the

projector falling and causing injury.

This symbol alerts the user that important information concerning the

operation and maintenance of this unit has been provided. The

information should be read carefully to avoid problems.

CAUTION

• Do not obstruct the projector's ventilation

holes. Doing so will prevent the dissipation

of heat and may result in fires. In

particular, do not use the projector in the

following ways:

Do not install the projector in a wall or in a

tight place where ventilation is poor, place

a cover it, etc.

• Do not install the projector in front of the

outlets of an air conditioner or heater or in

a place where vibrations are strong.

Doing so may result in fires.

• Do not install the projector in humid or

dusty places or exposed to smoke or

steam (such as near cooking equipment or

humidifiers). Doing so may result in fires.

• When installing the projector, leave

sufficient space between it and

surrounding objects. Failure to leave

sufficient space will prevent the dissipation

of heat and may result in fires.

• When removing the screws on left and

right on the mounting adapter, be sure to

support the projector while doing so.

Failing to do so may result in the projector

swinging back abruptly and causing injury.

• for PLUGGABLE EQUIPMENT, the

socket-outlet shall be installed near the

equipment and shall be easily accessible.

Installation Precautions

•Special techniques are required for the

installation work of the projector and

installation work should only be

undertaken by qualified and licenced

installers.

•NEC Display Solutions will not accept any

responsibility related to any accidents or

incidents due to insufficient or inferior

mounting techniques.

Installation Location

Avoid places of high temperature or low

temperature.

(Ambient operating temperature: 0°C to

35°C)

Avoid places exposed to direct sunlight and

the vicinity of ventilation holes of room air

conditioning and heating.

Avoid rooms with a lot of dust, humidity,

greasy smoke, or tobacco smoke.

Dirt will adhere to optical parts such as

lenses and mirrors and this will cause a

deterioration of image quality.

Avoid places in which the screen is exposed

to direct sunlight or illumination light.

When surrounding light directly hits the

screen, the image appears washed out and

is difficult to view.

Heed the Following

Specyfikacje produktu

Marka:	NEC
Kategoria:	Akcesoria do projektora
Model:	NP03CM

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z NEC NP03CM, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą

Twoje imię*

Twój email*

Napisz tutaj swoje pytanie

Instrukcje Akcesoria do projektora NEC

NEC NP03Wi Instrukcja

6 Września 2024

NEC NP03CM Instrukcja

2 Września 2024

NEC NP09CM Instrukcja

2 Września 2024

NEC WT40SN40 Instrukcja

22 Sierpnia 2024

NEC NP04CM Instrukcja

20 Sierpnia 2024

NEC NP31ZL Instrukcja

14 Sierpnia 2024

NEC NP30ZL Instrukcja

9 Sierpnia 2024

NEC NPSTWM Instrukcja

8 Sierpnia 2024

Instrukcje Akcesoria do projektora

Najnowsze instrukcje dla Akcesoria do projektora

Barco R9853370 Instrukcja

14 Stycznia 2025

Vogel's PPA 904 Instrukcja

10 Stycznia 2025

Roadinger MBT-3 Instrukcja

7 Stycznia 2025

Chief RPMC198 Instrukcja

31 Grudnia 2025

Chief RPMA360 Instrukcja

31 Grudnia 2025

Chief RSMA342 Instrukcja

31 Grudnia 2025

Chief RSMA360 Instrukcja

31 Grudnia 2025

Chief RPMC266 Instrukcja

31 Grudnia 2025

Chief RSMC360 Instrukcja

31 Grudnia 2025

Chief RPMA303 Instrukcja

31 Grudnia 2025