Instrukcja obsługi Mtx Audio TH904

Mtx Audio Radia samochodowe TH904

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Mtx Audio TH904 (44 stron) w kategorii Radia samochodowe. Ta instrukcja była pomocna dla 2 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/44

TH904

4 Channel Class-AB Power Ampliﬁer

600W

RMS

www.mtx.eu.com

www.mtx.com

www.mtx.com - www.mtx.eu.com

Introduction

Thank you for purchasing an MTX Audio Hi-Performance amplier. Proper installation matched with MTX speak-

ers and subwoofers provide superior sound and performance for endless hours of waking the neighbors, slam-

min' your friends or at out stomping wanna-be players. Congrats and enjoy the ultimate audio experience with

MTX !

Specications :

• 4-Channel Class-AB amplier

• CEA2006 certied Power Output :

- 150 watts RMS x 4-channels at 2 ohm and THD+N ≤1%

- 90 watts RMS x 4-channels at 4 ohm and THD+N ≤1%

- 300 watts RMS x 2-channels at 4 ohm and THD+N ≤1%

• Crossover :

- High pass 12dB/oct variable from 40Hz to 8000Hz

- Low pass 12dB/oct variable from 40Hz to 8000Hz

- Band pass 12dB/oct variable from 40Hz to 8000Hz

• Signal-to-Noise Ratio (1 watt) : > 81dB

• THD+Noise (Distortion) (1 watt) : ≤ 0,25%

• Frequency Response (±1dB) : 20Hz-20000Hz

• Maximum Input Signal : 6V

• Maximum Sensitivity : 100mV

• Dimensions : 383mm x 213mm x 52,5mm

• High level inputs with Smart Engage Technology

Features :

• XTC - (Xtant Technology Cooling) - A regulated thermal intercooler, injecting cool air through internal heat

sinks. Fan speed is load dependent and continuously variable, sampling the temperature of the heat sink and

transformers for maximum reliability. Intercooler exhaust is strategically placed to chill transformers and main-

tain exceptional performance at any volume level. (Cool eh ? An Amp with an Intercooler ! )

• Pure N-Channel Design - Patent N°: US05631608 and N°: US05783970 - MTX ampliers incorporate N-

Channel MOSFETs on both the positive and negative circuits of the output stage (PURE N-Channel Design). No

additional circuits are needed to compensate for inecient designs like P-Channel MOSFETs. Both the positive

and negative circuits have equal usable power ratings. Genuine Genius...Yea we know...

• EAF Technology (Ecient Auto Former) - Patent N°: US05598325 - Our Transformers are "Auto Formers"

which allows us to use smaller magnetics (-30% to -50%) yielding increased eciency. Turn ratios are improved

due to series connections between the primary and secondary taps meaning MORE Power !

• Smart Engage™ Technology - Patent N°: US06556683 - The amp switches on and o automatically when

connected with high level inputs. No need for a remote turn on wire from under the dashboard. No need to

remove the head unit. Thanks MTX !

• Bi-Level Inputs - High level inputs (Speaker cables) and line level inputs (RCA) utilize the same RCA type input

connections on the amp.

Owner’s Manual - TH904

Control Panel :

Gain Control - The gain control matches the input sensitivity of the amplier to the source unit being used. The

operating range varies from 100mv to 6V.

Adjusting the gain

1. Turn the gain control on the amplier all the way down (counter clockwise).

2. Turn up the volume control on the source unit to approximately 3⁄4 of maximum.

3. Adjust the gain control on the amplier until audible distortion occurs.

4. Adjust the gain control down until audible distortion disappears.

5. The amplier is now calibrated to the output of the source unit.

Low Pass X-Over Switch - Turns the active low pass (LP) x-over on and o. When engaged (in) the x-over is “ON”,

when disengaged (out) the x-over is “OFF”

Low Pass X-Over Frequency Control - Used to select the desired low-pass (LP) x-over frequency. The frequency is

adjustable from 40Hz to 8000Hz.

High Pass X-Over Switch - Used to turn on the active high-pass (HP) x-over on and o. When engaged (in) the

x-over is “ON”, when disengaged (out) the x-over is “OFF”.

High Pass X-Over Frequency Control - Used to select the desired high-pass (HP) x-over frequency. The frequency

is adjustable from 40Hz to 8000Hz..

Band Pass X-Over : To use, turn “ON” the HP and LP x-overs at the same time, creating a band-pass x-over for kick

woofers or midranges. You can tune the lter with frequency controls (3) and (5).

Important Notice: When both x-overs are turned “OFF”, the pre-amp section is in “Direct” mode providing the

best possible sound quality.

Power On LED - The LED illuminates red when the amp is switched on. For Short or Thermal protection, see

points 9 and 10

Control Panel (Top)

Connectors Panel (Side)

Specyfikacje produktu

Marka:	Mtx Audio
Kategoria:	Radia samochodowe
Model:	TH904

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Mtx Audio TH904, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą

Twoje imię*

Twój email*

Napisz tutaj swoje pytanie

Instrukcje Radia samochodowe Mtx Audio

Mtx Audio TH902 Instrukcja

16 Września 2024

Mtx Audio TX6500D Instrukcja

16 Września 2024

Mtx Audio RT50.4M Instrukcja

16 Września 2024

Mtx Audio TX2450 Instrukcja

15 Września 2024

Mtx Audio re-Q Instrukcja

15 Września 2024

Mtx Audio TR275 Instrukcja

14 Września 2024

Mtx Audio TX81000D Instrukcja

14 Września 2024

Mtx Audio TX480D Instrukcja

14 Września 2024

Mtx Audio X1000D Instrukcja

14 Września 2024

Mtx Audio RT60-2 Instrukcja

13 Września 2024

Instrukcje Radia samochodowe

Najnowsze instrukcje dla Radia samochodowe

JVC KD-R90BT Instrukcja

15 Października 2024

Kenwood KMM-X705 Instrukcja

15 Października 2024

Alpine CDM-7870R Instrukcja

14 Października 2024

Hyundai H-CMD2009 Instrukcja

14 Października 2024

Dual XC4100 Instrukcja

13 Października 2024

Audiovox VXE 3010 Instrukcja

13 Października 2024

MB Quart PAB 5400 Instrukcja

13 Października 2024

Hyundai H-CDM8023 Instrukcja

13 Października 2024

Caliber RCD110B Instrukcja

13 Października 2024

JVC KD-X30 Instrukcja

13 Października 2024