Instrukcja obsługi Monoprice Joule 3D Printer DIY Assembly Kit
Monoprice
drukarka 3D
Joule 3D Printer DIY Assembly Kit
Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Monoprice Joule 3D Printer DIY Assembly Kit (45 stron) w kategorii drukarka 3D. Ta instrukcja była pomocna dla 7 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek
Strona 1/45
Joule 3D Print
Joule 3D Print
Joule 3D Print
Joule 3D PrintJoule 3D Printer DIY Assembly Kit
er DIY Assembly Kit
er DIY Assembly Kit
er DIY Assembly Kit er DIY Assembly Kit
P/N 43363
User's Manual
User's Manual
User's Manual
User's Manual User's Manual
2
SAFETY WARNINGS
SAFETY WARNINGS
SAFETY WARNINGS
SAFETY WARNINGSSAFETY WARNINGS AND GUIDELINES
AND GUIDELINES
AND GUIDELINES
AND GUIDELINES AND GUIDELINES
Please read this entire manual before using this device, paying extra attention to these safety warnings and guidelines. Please keep this
manual in a safe place for future reference.
• This device is intended for indoor use only.
• Do not expose this device to water or moisture of any kind. Do not place drinks or other containers with moisture on or near the
device. If moisture does get in or on the device, immediately remove it from its power source and allow it to fully dry before
reapplying power.
• Do not touch the device, the power cord, or any other connected cables with wet hands.
• Do not install this device on an unstable surface where it could fall and cause either personal injury or damage to the device
and/or other equipment.
• Do not expose this device to excessive vibration, extreme force, shock, or fluctuations in temperature or humidity.
• Do not expose this device to excessively high temperatures. Do not place it in, on, or near a heat source, such as a fireplace,
stove, radiator, etc. Do not leave it in direct sunlight.
• Do not place or install this device in an area where it can be exposed to excessive amounts of dust, humidity, oil, smoke, or
combustible vapors.
• Use only in a well-ventilated area. Do not use in close, confined spaces.
• Prior to operation, check the unit and power cord for physical damage. Do not use if physical damage has occurred.
• Before plugging the unit into a power outlet, ensure that the outlet provides the same type and level of power required by the
device.
3
• This device uses a grounded power cord and requires a ground connection for safe operation. Ensure that the power source has
a proper ground connection. Do not modify the plug or use a "cheater" plug to bypass the ground connection.
• Unplug this device from the power source when not in use.
• Take care to prevent damage to the power cord. Do not allow it to become crimped, pinched, walked on, or become tangled
with other cords. Ensure that the power cord does not present a tripping hazard.
• Never unplug the unit by pulling on the power cord. Always grasp the connector head or adapter body.
• Clean using a soft, dry cloth only. Do not use chemical cleaners, solvents, or detergents. For stubborn deposits, moisten the cloth
with warm water.
• This device has no user serviceable parts. Do not attempt to open, service, or modify this device.
• Take care to avoid touching hot parts, including heat blocks, extruder nozzle, extruded filament, and the heated build plate.
• Do not wear gloves when operating or repairing to avoid entanglement.
• Keep the printer and all accessories out of reach of children.
• Do not reach inside the printer during operation.
• Always allow the printer and extruded filament to cool before reaching inside.
• Ensure that the printer is turned off and unplugged from its power source before making repairs or performing service.
Specyfikacje produktu
| Marka: | Monoprice |
| Kategoria: | drukarka 3D |
| Model: | Joule 3D Printer DIY Assembly Kit |
Potrzebujesz pomocy?
Jeśli potrzebujesz pomocy z Monoprice Joule 3D Printer DIY Assembly Kit, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą
Instrukcje drukarka 3D Monoprice
22 Września 2024
21 Września 2024
21 Września 2024
20 Września 2024
20 Września 2024
20 Września 2024
19 Września 2024
19 Września 2024
18 Września 2024
Instrukcje drukarka 3D
- drukarka 3D LulzBot
- drukarka 3D Kodak
- drukarka 3D MakerBot
- drukarka 3D Gembird
- drukarka 3D Flashforge
- drukarka 3D Renkforce
- drukarka 3D Velleman
- drukarka 3D Polaroid
- drukarka 3D Anker
- drukarka 3D Creality
- drukarka 3D Weller
- drukarka 3D Exibel
- drukarka 3D BQ
- drukarka 3D XYZprinting
- drukarka 3D Craftbot
- drukarka 3D Weistek
- drukarka 3D Leap Frog
- drukarka 3D Snapmaker
- drukarka 3D Dimension
- drukarka 3D Anycubic
- drukarka 3D German RepRap
- drukarka 3D Creality3D
- drukarka 3D Wanhao
- drukarka 3D Artillery
- drukarka 3D GooVer
- drukarka 3D Easy Threed
- drukarka 3D Zortrax
- drukarka 3D SINDOH
- drukarka 3D PP3DP
- drukarka 3D Wasp
- drukarka 3D 3D Systems
- drukarka 3D Raise3D
Najnowsze instrukcje dla drukarka 3D
26 Grudnia 2024
26 Grudnia 2024
26 Grudnia 2024
26 Grudnia 2024
12 Grudnia 2024
7 Października 2024
7 Października 2024
4 Października 2024
4 Października 2024
4 Października 2024