Instrukcja obsługi Creality K2 Plus
Creality
drukarka 3D
K2 Plus
Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Creality K2 Plus (27 stron) w kategorii drukarka 3D. Ta instrukcja była pomocna dla 6 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek
Strona 1/27
User nual
s 3D Printer
V 1.6_EN
K2 P s
Thank you for choosing Creality. For your convenience, please read through this User Manual before you sta and follow
the instructions provided carefully.
Creality is always ready to provide you with high-quality seices. If you encounter any issues or have any questions when
using our products, please use the contact information at the end of this manual to contact us. To fuher improve your
user experience, you can nd more about our devices via the following methods:
User manual: You can nd instructions and videos in the USB ash disk provided with the printer.
You can also visit our ocial website (https://www.creality.com) to nd information regarding software, hardware,
contact information, device instructions, device warranty information, and more.
1. You can upgrade the rmware directly through the device screen;
2. You can upgrade the rmware via the Creality Cloud OTA;
3. Please visit the ocial website https://www.creality.com, click on “Suppo → Download Center ” , select the corresponding
model to download the required rmware, (Or click on“Creality Cloud → Downloads → Firmware”) , after installation is complete,
you can use it.
To Our Dear Users
Firmware Upgrade
Product Operation and After-Sales Seice Information
1. You can log in to the Creality Ocial Wiki (https://wiki.creality.com) to explore more
detailed after-sales seice tutorials.
2. Or contact our after-sales seice center at +86 755 3396 5666, or send e-mail to
cs@creality.com.
Creality Wiki
NOTES
1. Do not use the printer in any way other than described herein in order to avoid personal inju or propey damage;
2. Do not place the printer near any heat source or ammable or explosive objects. We suggest placing it in a well-venti-
lated, cool and dustless environment;
3. Do not expose the printer to a violent vibration or any other unstable environment, as this may cause poor print
quality;
4. Please use recommended laments to avoid clogging of the extrusion head and causing damage to the machine;
5. Do not use the power cable of other products during installation. Always use a grounded three-prong power outlet,
which accompanies the printer;
6. Do not touch the nozzle and the heated bed during operation to avoid burns or personal inju;
7. Do not wear gloves or wraps while operating the machine to prevent entrapment of movable pas that could cause
crushing and cutting injuries to bodily pas;
8. Use the provided tools to clean the lament from the extruder in time taking advantage of the residual temperature
after printing. Do not touch the extruder directly when cleaning, otherwise it may cause burns;
9. Clean the printer frequently. Clean the printer body with a d cloth regularly after powering o the printer, wipe away
dust, bonded print lament and foreign objects on the guide rails;
10. Children under 10 years old should not use the printer without supeision, otherwise it may cause personal inju;
11. Users should comply with the laws and regulations of the corresponding countries and regions where the equipment
is located (used), abide by professional ethics, pay attention to safety obligations, and strictly prohibit the use of our
products or equipment for any illegal purposes; Creality will not be responsible for any violators' legal liability under any
circumstance;
12. Tip: Do not plug in or unplug wires on a charged basis.
Specyfikacje produktu
| Marka: | Creality |
| Kategoria: | drukarka 3D |
| Model: | K2 Plus |
Potrzebujesz pomocy?
Jeśli potrzebujesz pomocy z Creality K2 Plus, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą
Instrukcje drukarka 3D Creality
16 Stycznia 2025
16 Stycznia 2025
26 Grudnia 2024
26 Grudnia 2024
26 Grudnia 2024
26 Grudnia 2024
2 Października 2024
2 Października 2024
2 Października 2024
2 Października 2024
Instrukcje drukarka 3D
- drukarka 3D LulzBot
- drukarka 3D Kodak
- drukarka 3D MakerBot
- drukarka 3D Gembird
- drukarka 3D Flashforge
- drukarka 3D Renkforce
- drukarka 3D Velleman
- drukarka 3D Polaroid
- drukarka 3D Anker
- drukarka 3D Weller
- drukarka 3D Exibel
- drukarka 3D BQ
- drukarka 3D Monoprice
- drukarka 3D XYZprinting
- drukarka 3D Craftbot
- drukarka 3D Weistek
- drukarka 3D Leap Frog
- drukarka 3D Snapmaker
- drukarka 3D Dimension
- drukarka 3D Anycubic
- drukarka 3D German RepRap
- drukarka 3D Creality3D
- drukarka 3D Wanhao
- drukarka 3D Artillery
- drukarka 3D GooVer
- drukarka 3D Easy Threed
- drukarka 3D Zortrax
- drukarka 3D SINDOH
- drukarka 3D PP3DP
- drukarka 3D Wasp
- drukarka 3D 3D Systems
- drukarka 3D Raise3D
- drukarka 3D Orbbec
Najnowsze instrukcje dla drukarka 3D
27 Stycznia 2025
12 Grudnia 2024
7 Października 2024
7 Października 2024
4 Października 2024
4 Października 2024
4 Października 2024
4 Października 2024
4 Października 2024
4 Października 2024