Instrukcja obsługi MIOPS RemotePlus

MIOPS pilot RemotePlus

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla MIOPS RemotePlus (24 stron) w kategorii pilot. Ta instrukcja była pomocna dla 2 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/24

RemotePlus User Manual

Content:

Content of the Package

2. Charging and Operation

3. First Use

4. Camera and Flash Connection

5. Mobile Application

6. Connecting to MIOPS RemotePlus

7. Firmware Upgrade

8. Using the Mobile Application

FEATURES

9.1. CABLE RELEASE MODES

9.1.a. Cable Release

9.1.b.

Press & Hold

9.1.c. Press & Lock

9.1.d. Timed Release

9.1.e.

Self Timer

9.1.f. Timed Release & Self Timer

9.2. TIMELAPSE MODES

9.2.a. Basic Timelapse

9.2.b. Long Exposure Timelapse

9.2.c. Bulb Ramping Timelapse

9.2.d. Road Lapse

9.2.e. HDR Timelapse

9.2.f. HDR

9.3.

SMARTPHONE SENSOR MODES

9.3.a. Sound

9.3.b. Vibration

9.3.c. Motion

9.4.

DEVICE SENSOR MODES

9.4.a. Lightning

9.4.b. Sound

9.4.c. Laser

10. SETTINGS

1. Content of the Package

When you purchase a MIOPS RemotePlus, it will be delivered with the following

items.

1 x MIOPS RemotePlus

1 x USB Charge Cable

2. Charging and Operation

MIOPS RemotePlus comes with a rechargeable battery which lasts up to 24 hours

with a single charge. The battery will be charged when you

connect MIOPS RemotePlus to a USB power source. You can use your computer USB

port for this purpose.

You can power MIOPS RemotePlus directly from the USB port.

3. First Use

Your MIOPS RemotePlus may not be delivered with the latest firmware. If a new

firmware has been released, before you have used it for the first time, you should

update the firmware first. To get detailed information about the firmware

upgrade, see the Firmware Upgrade Section.

The rechargeable battery comes partially charged. You can use it right out of the

box but you may need to charge to get it fully loaded. You can charge the battery

using any USB charger (500 mA min.) or the USB port of your computer. MIOPS

RemotePlus will be delivered with a Mini-USB cable. You can use this cable to

charge it. The mini end of the USB cable will be plugged into the USB port. It is

located on the left side of the device under the protective cover.

When you short press the button on the back side of the device, the lights on the

top side will flash for a short time and the device will start to work.

4. Camera and Flash Connection

The MIOPS RemotePlus uses connection cables to trigger your camera or flash unit.

Your unit will be shipped with the proper camera connection cables. The MIOPS

RemotePlus is a versatile device, which is compatible with many brand and models.

You can use the same device with many different cameras by just changing the

connection cable.

The MIOPS RemotePlus has a single output for both the camera and the flash

connection. The port is a 2.5 mm stereo female jack. The camera cable already has

the male 2.5 mm stereo jack on one end. The other end changes depending on the

camera. For flash connection, you should have a cable with 2.5mm stereo jack on

one end and your flash compatible plug on the other end. You may consider

purchasing a MIOPS Flash Adapter if you don't have a compatible flash cable.

The camera and flash cables are designed to trigger the cameras and flash units

only. Do not use them for any other purpose. Doing so may damage the cable or the

device.

5. Mobile Application

MIOPS RemotePlus requires a mobile app which has been designed as an interface

to configure and control your device easily. The communication between the

smartphone and MIOPS RemotePlus is done over Bluetooth connection. So, your

smartphone has to be compatible with Bluetooth 4.0.

MIOPS MOBILE app is available on iOS and Android platforms. Search for MIOPS

MOBILE in your app store, or use the following buttons to download the app.

6. Connecting to MIOPS RemotePlus

Warning: Please make sure that your Bluetooth is turned ON in the connection

preferences of your smartphone or tablet.

After opening the mobile app, you will be asked for selecting your MIOPS product.

After selecting MIOPS RemotePlus from the list, you will be listed all available

RemotePlus devices around. In case your device is not shown in the list, make sure

that your RemotePlus is turned ON and click the Scan button again.

7. Firmware Upgrade

Specyfikacje produktu

Marka:	MIOPS
Kategoria:	pilot
Model:	RemotePlus
Kolor produktu:	Czarny
Liczba portów Mini-USB:	1
Minutnik:	Tak
Obsługiwane operacyjne systemy komórkowe:	Android, iOS
Standardowe rozwiązania komunikacyjne:	Bluetooth
Odpowiedni do smartfonu:	Tak