Instrukcja obsługi Metra MPS-DSPL-BT

Metra Konwerter audio/wideo MPS-DSPL-BT

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Metra MPS-DSPL-BT (16 stron) w kategorii Konwerter audio/wideo. Ta instrukcja była pomocna dla 3 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/16

MPS-DPSL-BT

I N S T A L L A T I O N I N S T R U C T I O N S

Google Play Store Apple App Store

iOS 12.1 or higher

INTERFACE FEATURES

INTERFACE COMPONENTS

TOOLS & INSTALLATION ACCESSORIES REQUIRED

• Crimping tool and connectors, or solder gun,

solder, and heat shrink • Tape • Wire cutter

• Zip ties • Multimeter

TABLE OF CONTENTS

Preface ....................................................................2

Installing bluetooth board ....................................3

Pinout .....................................................................4

Installation .............................................................5

Stand-alone bluetooth diagram ..........................6

Quick setup guide ..............................................7-12

Advanced DSP features & control options .....13-14

Other installation options ....................................15

Speciﬁcations ....................................................... 16

Marine & Powersports Bluetooth Streaming

Audio Interface w/ DSP Controls

No Source Needed.

• 15 Band graphic EQ

• Bluetooth streaming from your smart device

• 4 inputs and 6 outputs, including front, rear, and subwoofer

• Independent equalization for front, rear, and sub

• Independent crossover for front, rear, and sub

• Selectable slope (12, 24, 36, or 48db per octave)

• Front and rear channels can be delayed independently up to 10ms

• Water resistant enclosure with zip tie mounts included

• Clipping detection and limiting circuits

• Bluetooth interface module included

• Volume knob & Bass knob included

•

Settings adjusted via Bluetooth® in a smart device application (tablet

or mobile phone), compatible with both Android and Apple devices

• Read, write, and store conﬁgurations for future recall

• Password protect feature available in the mobile app

• Micro-B USB updatable

• MPS-DSPL-BT circuit board

• Bluetooth streaming audio circuit board

• Volume and Subwoofer knobs

• MPS-DPSL-BT harness (16-pin & 20-pin, with gaskets)

• MPS-DPSL-BT enclosure

• Case

• Cap (with O-ring)

PREFACE

The MPS-DSPL-BT is designed for UTV, Marine and Motorcycle applications when a source is not required. The interface includes the AXDSPL-BT Bluetooth Streaming circuit board. This

board plugs directly into the DSP’s circuit board and will allow your phone or tablet to stream music directly to your aftermarket ampliﬁers. The MPS-DSP-BT is housed in a water tight

case making it perfect for ON/OFF road vehicles that are exposed to the elements. We recommend matching the MPS-DSPL-BT with our MPS-RZKIT for 2014-2020 Polaris RZR.

The MPS-DSPL-BT provides 6 outputs that are assignable to match your systems requirements. Outputs are commonly assigned as Front, Rear, and Subwoofer, which are all setup

through the free Axxess AX-DSP-XL application. Included with interface are two separate knobs that are used as an overall system volume control and a subwoofer’s volume control.

The interface provides a 12-volt 1-amp output to turn on aftermarket amp(s). If installing multiple amps, an SPDT automotive relay will be required if the amp turn-on current of all

amps combined exceeds 1-amp. Use Metra part number E-123 (sold separately) for best results.

REV. 9/24/2020 INSTMPS-DPSL-BT

INSTALLING BLUETOOTH BOARD

16-Pin Header

AX-DSPL-BT

• The AXDSPL-BT Bluetooth interface will be used for adding a Bluetooth interface to the

MPS-DPSL-BT for playing music from your smart device.

• While playing music the volume can be controlled from your streaming device or from

the included volume knob.

1. Make sure the 16 pin and 20 pin plugs are disconnected from the Important!

circuit board before installing the ASDSPL-BT.

2. Locate the 16-pin header on the circuit board.

3. Important! Referencing how the Bluetooth interface is laid out in the picture,

carefully line up the header pins to the AXDSPL-BT Bluetooth interface. Gently

press down to secure.

Volume Knob Installation:

• Connect the Brown wire (Volume Control Wire) from the MPS-DPSL-BT harness, to the

Orange wire from the volume knob you want controlling the overall volume of your

system. The black wire from your volume control will need to be grounded. Tapping

into the ground wire from the MPS-DSPL-BT harness is recommended.

Subwoofer Knob installation

• Connect the Orange wire from the MPS-DSPL-BT Orange harness, to the wire from

the bass knob. The black wire from your volume control will need to be grounded.

Tapping into the ground wire from the MPS-DSPL-BT harness is recommended.

Specyfikacje produktu

Marka:	Metra
Kategoria:	Konwerter audio/wideo
Model:	MPS-DSPL-BT

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Metra MPS-DSPL-BT, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą

Twoje imię*

Twój email*

Napisz tutaj swoje pytanie

Instrukcje Konwerter audio/wideo Metra

Metra AXDSPL-VW1 Instrukcja

18 Września 2024

Metra MPS-DSPL-BT Instrukcja

18 Września 2024

Metra AXDSPL-HN3 Instrukcja

17 Września 2024

Metra AXDSPX-GL44 Instrukcja

17 Września 2024

Metra AX-DSPH-HN2 Instrukcja

17 Września 2024

Instrukcje Konwerter audio/wideo

Najnowsze instrukcje dla Konwerter audio/wideo

Abus TVAC20001 Instrukcja

10 Października 2024

StarTech.com VS123HD Instrukcja

9 Października 2024

StarTech.com VS421HDDP Instrukcja

9 Października 2024

StarTech.com ST228MX Instrukcja

9 Października 2024

StarTech.com HDMI2DVI Instrukcja

9 Października 2024

StarTech.com VGANTSCPRO Instrukcja

9 Października 2024

StarTech.com CPNT2VGAA Instrukcja

9 Października 2024

StarTech.com DVI2VGA Instrukcja

9 Października 2024

StarTech.com VS222HDQ Instrukcja

9 Października 2024

StarTech.com VS122HDMIU Instrukcja

9 Października 2024