Instrukcja obsługi Metra AXDSPL-VW1

Metra Konwerter audio/wideo AXDSPL-VW1

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Metra AXDSPL-VW1 (13 stron) w kategorii Konwerter audio/wideo. Ta instrukcja była pomocna dla 5 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/13
AXDSPL-VW1
I N S T A L L A T I O N I N S T R U C T I O N S
AxxessInterfaces.com © COPYRIGHT 2020 METRA ELECTRONICS CORPORATION REV. 8/3/20 INSTAXDSPL-VW1
Google Play Store Apple App Store
iOS 12.1 or higher
INTERFACE FEATURES
INTERFACE COMPONENTS
TOOLS & INSTALLATION ACCESSORIES REQUIRED
• Crimping tool and connectors, or solder gun,
solder, and heat shrink • Tape • Wire cutter
• Zip ties • Multimeter
TABLE OF CONTENTS
Installation Options ...............................................2
Installation .............................................................2
Connections ........................................................3-4
AXDSPL-BT Installation...........................................5
AXDSPL-SP Installation...........................................6
Mobile App .........................................................7-15
Specifications ....................................................... 16
Volkswagen † DSP Interface With Pre-Wired
Harness 2011-2014
• Includes a DSP (Digital Signal Processor)
• 15 Band graphic EQ
• 6 outputs including front, rear, and subwoofer
• Independent equalization for front, rear, and sub
• Selectable low pass, band pass, and high pass filters
• Selectable crossover slopes; 12db, 24db, 36db, 48db
• Each channel can be delayed independently up to 10ms
• Clipping detection and limiting circuits
• Designed for non-amplified models
• Easy behind the radio installation with pre-wired harness
• Internal header port for adding interface modules
• Bass knob included for level control of subwoofer amp
• Settings adjusted via Bluetooth® in a smart device application (tablet
or mobile phone), compatible with both Android and Apple devices
• Read, write, and store configurations for future recall
• Password protect feature available in the mobile app
• Micro-B USB updatable
• AXDSPL-VW1 interface
• AXDSPL-VW1 interface harness
• AXDSPL-VW1 vehicle T-harness • Bass knob
APPLICATIONS
Visit axxessinterfaces.com for current application list
† Excluding models equipped with a Fender sound system
2
Adding a sub to a factory system:
This feature offers the ability to add a subwoofer to a factory system. (refer to page 3)
Adding a full-range amp & sub to a factory system:
This feature offers the ability to add a full-range amp and sub to a factory system. (refer to page 4)
16-pin header port:
Inside the interface is a 16-pin header port for adding optional modules (sold separately). Page 5
and 6 will show the installation and use of these modules.
• AXDSPL-BT - Bluetooth streaming interface
• AXDSPL-SP - Toslink digital output
Note: The interface provides a 12-volt 1-amp output to turn on aftermarket amp(s). If installing
multiple amps, an SPDT automotive relay will be required if the amp turn-on current of all amps
combined exceeds 1-amp. Use Metra part number E-123 (sold separately) for best results.
1. Remove the factory radio †, then unplug all connectors.
2. Install the AXDSPL-VW1 vehicle T-harness to the vehicle and make all necessary
connections, but leave the amp turn-on wire disconnected.
3. AXDSPL-VW1 vehicle T-harness AXDSPL-VW1 interface Plug the to the .
4. Plug the AXDSPL-VW1 interface harness AXDSPL-VW1 interface to the .
5.
Download and install the AX-DSP-X app Google Play Store Apple App Store from the or
.
6.
Cycle the ignition on.
7. Open the app then select the Bluetooth Connection tab. Follow the instructions to
pair the mobile device to the interface. Refer to page 6 for more information.
8. Configuration Scroll to the tab then select the vehicle type. Press the ‡ Lock Down
button to save the configuration. Refer to page 7 for more information.
9. Connect the amp turn-on wire.
10. Adjust the settings in the app as desired. Press the ‡ button to save any Lock Down
new configurations.
† Refer to Metra online for dash disassembly. If Metra makes a dash kit for the vehicle,
disassembly will be within those instructions.
‡ Anytime the interface is locked down the key must be cycled off then back on
INSTALLATION OPTIONS INSTALLATION
3
REV. 8/3/2020 INSTAXDSPL-VW1
Factory Radio
These outputs can be used for
additional sub amps, or for adding
onto the em at a later datesyst
6
5
4
3
2
1
RCA Jacks
(sold separately)
K deep Connecte
Any remaining wires
tape off and disregard
Black - Ground
Orange - Control
Bass Knob
Factory Radio Harness
Interface
Any remaining wires
tape off and disregard
Vehicle T-Harness
Blue/White - Amp Turn-On Wire
Interface Harness
ADDING A SUB TO A FACTORY SYSTEM

Specyfikacje produktu

Marka: Metra
Kategoria: Konwerter audio/wideo
Model: AXDSPL-VW1

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Metra AXDSPL-VW1, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje Konwerter audio/wideo Metra

Metra

Metra AXDSPL-VW1 Instrukcja

18 Września 2024
Metra

Metra MPS-DSPL-BT Instrukcja

18 Września 2024
Metra

Metra AXDSPL-HN3 Instrukcja

17 Września 2024
Metra

Metra AXDSPX-GL44 Instrukcja

17 Września 2024
Metra

Metra AX-DSPH-HN2 Instrukcja

17 Września 2024

Instrukcje Konwerter audio/wideo

Najnowsze instrukcje dla Konwerter audio/wideo

Tripp Lite

Tripp Lite P569-006-IND2 Instrukcja

15 Stycznia 2025
AJA

AJA 12G-AMA Instrukcja

15 Stycznia 2025
AJA

AJA FIDO-T-MM Instrukcja

15 Stycznia 2025
AJA

AJA OG-FIDO-TR Instrukcja

15 Stycznia 2025
INOGENI

INOGENI U-CAM Instrukcja

14 Stycznia 2025
D-Link

D-Link AirPremier DWL-1800 Instrukcja

13 Stycznia 2025
StarTech.com

StarTech.com ST122VGA Instrukcja

10 Stycznia 2025
D-Link

D-Link DMC-300M Instrukcja

9 Stycznia 2025
TRENDnet

TRENDnet TFC-GSFP Instrukcja

9 Stycznia 2025
TRENDnet

TRENDnet TFC-FSFP Instrukcja

9 Stycznia 2025