Instrukcja obsługi Metabo UR18DA

Metabo radio UR18DA

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Metabo UR18DA (57 stron) w kategorii radio. Ta instrukcja była pomocna dla 4 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/57
Designed for operating in USA & Canada only.
When this product is used in areas other than the USA & Canada,
we cannot guarantee the product quality and performance.
Model
Modèle
Modelo UR 18DA Cordless Radio
Radio de chantier sans l
Radio Inalámbrico
SAFETY INSTRUCTIONS AND INSTRUCTION MANUAL
WARNING
IMPROPER OR UNSAFE use of this radio can result in death or serious bodily injury!
This manual contains important information about product safety. Please read and understand
this manual BEFORE operating the radio. Please keep this manual available for other users
and owners before they use the radio.
This manual should be stored in safe place.
INSTRUCTIONS DE SECURITE ET MODE D’EMPLOI
AVERTISSEMENT
L’utilisation INAPPROPRIÉE OU DANGEREUSE de cette radio pourrait résulter en de
sérieuses blessures corporelles ou la mort !
Ce manuel contient des informations importantes de sécurité concernant ce produit. Merci de
bien lire et comprendre ce manuel AVANT de faire fonctionner la radio. Merci de garder ce
manuel disponible pour d’autres utilisateurs ou propriétaires avant qu’ils n’utilisent la radio.
Ce manuel doit être rangé dans un endroit sûr.
INSTRUCCIONES DE SEGURIDAD Y MANUAL DE INSTRUCCIONES
ADVERTENCIA
¡EL USO INADECUADO O INSEGURO de este radio puede resultar en heridas serias o la
muerte!
Este manual contiene información importante sobre la seguridad del producto. Por favor lea y
entienda este manual ANTES de operar el radio. Por favor mantenga este manual disponible
para todos los usuarios y dueños antes de usar el radio.
Este manual debe ser guardado en un lugar seguro.
English
2
IMPORTANT SAFETY INSTRUCTIONS
1) Read these instructions.
2) Keep these instructions.
3) Heed all warnings.
4) Follow all instructions.
5) Do not use this apparatus near water.
6) Clean only with dry cloth.
7) Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
8) Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including
ampli ers) that produce heat.
9) Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles,
and the point where they exit from the apparatus.
10)
Only use attachments/accessories speci ed by the manufacturer.
11)
Unplug this apparatus during lightning storms or when unused for long periods of time.
12)
Refer all servicing to quali ed service personnel. Servicing is required when the apparatus has been
damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects
have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate
normally, or has been dropped.
IMPORTANT SAFETY INFORMATION
Read and understand all of the safety precautions, warnings and operating instructions in the Instruction
Manual before operating or maintaining this tool.
Most accidents that result from tool operation and maintenance are caused by the failure to observe basic
safety rules or precautions. An accident can often be avoided by recognizing a potentially hazardous situation
before it occurs, and by observing appropriate safety procedures.
Basic safety precautions are outlined in the “SAFETY” section of this Instruction Manual and in the sections
which contain the operation and maintenance instructions.
Hazards that must be avoided to prevent bodily injury or machine damage are identi ed by WARNINGS on
the tool and in this Instruction Manual.
NEVER use this tool in a manner that has not been speci cally recommended by metabo HPT.
MEANINGS OF SIGNAL WORDS AND SYMBOLS
WARNING indicates a potentially hazardous situations which, if ignored, could result in death or serious injury.
CAUTION indicates a potentially hazardous situations which, if not avoided, may result in minor or moderate
injury, or may cause machine damage.
NOTE emphasizes essential information.
This mark is intended to alert the user to the presence of uninsulated “dangerous voltage” within
the product’s enclosure that may be of su cient magnitude to constitute a risk of electric shock to
persons.
This mark is intended to alert the user to the presence of important operating and maintenance
(servicing) instructions in the literature accompanying the product.
English
3
SAFETY
When using an electrical appliance, basic precautions should always be followed, including the following:
READ ALL INSTRUCTIONS BEFORE USING (THIS
APPLIANCE)
WARNING
To reduce the risk of re, electric shock, or
injury:
1. Use indoors only.
2. Use only the speci ed power supply voltage.
3. Do not allow to be used as a toy. Close
attention is necessary when used by or near
children.
4. Use only as described in this manual.
5. Use only manufacturer’s recommended
attachments.
6. Do not handle appliance with wet hands.
7. Do not touch the power plug (AC adapter)
with wet hands.
8. Do not use the radio in the bathroom or
shower.
9. To reduce the risk of re or electric shock, do
not expose this radio to rain or moisture.
10.
Radio shall not be exposed to dripping or
splashing and no objects lled with liquids,
such as vases, shall be placed on radio.
11.
Do not operate radio in explosive
atmospheres, such as in the presence of
ammable or combustible liquids, gasses or
dust.
12.
In case of use BSL36B18, never use when
the temperature is below 32°F (0°C) or above
104°F (40°C). In case of use AC adapter, never
use when the temperature is below 32°F (0°C)
or above 77°F (25°C).
13.
Do not put any object into openings.
14.
Avoid damaging the AC adapter cord.
Do not modify, forcibly bend, twist or pull the cord,
place heavy objects on it or place it near heating
appliances.
15.
When not in use, remove the power plug (AC
adapter) from the electric socket and from
the radio. Failure to do so may lead to electric
shock or re.
16.
Remove the AC adapter from the outlet during
thunderstorms.
17.
Do not touch the FM antenna during
thunderstorms.
18.
Do not disassemble or modify the radio.
Inspections and repairs should be performed by
the store where purchased or by a metabo HPT
power tool service center.
19.
Insert the power plug (AC adapter) securely
as far as it will go.
Dust or dirt between the power plug and the
electric socket may lead to re. Remove the
power plug periodically and wipe o any dust or
dirt with a dry cloth.
20.
Do not let any unspeci ed objects or water
get inside the radio body.
With the exception of the AC adapter and the
rechargeable battery, if any metal or ammable
object or water gets inside the back door, it may
lead to electric shock or re.
Take care to prevent iron powder from the bass
re ex speakers, dust or water getting into the
radio.
21.
Do not place the radio on an unstable surface
or in a high place.
22.
When no slide battery is loaded, attach the
slide terminal cover to the terminal to prevent
cuts and other injuries that may result from
touching the terminal area.
23.
If is displayed when you turn the power
on with the rechargeable battery inserted, the
battery power is low.
Power the radio from the AC adapter or insert a
charged battery.


Specyfikacje produktu

Marka: Metabo
Kategoria: radio
Model: UR18DA

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Metabo UR18DA, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje radio Metabo

Instrukcje radio

Najnowsze instrukcje dla radio

Ruarkaudio

Ruarkaudio Rseven Instrukcja

15 Października 2024
Ruarkaudio

Ruarkaudio MR1 Instrukcja

15 Października 2024
Denver

Denver TWE-55B Instrukcja

15 Października 2024
Audiosonic

Audiosonic CL-1486 Instrukcja

14 Października 2024
Sangean

Sangean DPR-39 Instrukcja

13 Października 2024
Roberts

Roberts Stream 93i Instrukcja

13 Października 2024
Sangean

Sangean RCR-9 Instrukcja

13 Października 2024
Uniden

Uniden UH45CP Instrukcja

12 Października 2024
Muse

Muse M-178 P Instrukcja

10 Października 2024
Sencor

Sencor SIR 5000WDB Instrukcja

10 Października 2024