Instrukcja obsługi Meliconi Gumbody universal 5 web
Meliconi
Afstandsbediening
Gumbody universal 5 web
Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Meliconi Gumbody universal 5 web (7 stron) w kategorii Afstandsbediening. Ta instrukcja była pomocna dla 8 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek
Strona 1/7
8
Keep this booklet for future reference.
Thank you for choosing a Meliconi remote control.
The Universal 5 web remote control is ideal for replacing up to 5 remote controls for TV - SAT (satellite decoder)
- TER (Digital Terrestrial decoder) - DVD (Dvd player and Blu Ray) – PVR (Personal Video Recorder, Media
Center and VCR). Moreover, thanks to its AUDIO UPDATE function, the device can also be connected to a PC
via the cable supplied in order to download the information required to confi gure it. The Universal 5 web remote
control also has a LEARN function so it can learn any original remote control signals not yet inserted in the
databank, as well as allowing secondary functions to be acquired and saved on the F1 - F2 - F3 - F4 function
keys or on any other button on the keypad. The remote control has a non-volatile memory, meaning that it does
not lose its settings even if there are no batteries in it. Its ergonomic shape and soft rubber body make it easy to
grip and protect the remote control if it is knocked or dropped.
IMPORTANT: The remote control must not be exposed to excessive heat sources.
USE OF THE BUTTONS AND FUNCTIONS
The functions of the buttons described below are available only if they are on your original device.
Volume control +/–
TELETEXT buttons
ON/OFF switches the device OFF and
in some cases ON
Numeric keypad
Confi rm selection
MUTE turns sound OFF and ON
For selecting an external
input source
For selecting the next programme P+
or the previous programme P–
For moving around within the MENU
Buttons for selecting the device to be
controlled.
Fastext functions or for selecting sub-
menus using colours
DVD/PVR RECORD PAUSE
STOP PLAY buttons
DVD and PVR forward/back functions
Specifi c buttons for decoder
Displays the list of programmes
Selects analogue/digital
Selects digital TV and radio
Button for activating the LEARN function.
The button lights up when commands are
being captured or transmitted
User customised buttons that additional
commands can be saved to and accessed
directly from
I
EN
9
INSERTING THE BATTERIES
Before using the remote control, insert the batteries and programme it.
The remote control requires 2 new 1.5V alkaline AAA/LR03 batteries.
Insert them as illustrated.
Try pressing a number button and check that the red light remains lit
continuously until you release the button. If the light fl ashes, the batteries
inserted are not charged and are about to go fl at, therefore you must
substitute them.
Do not leave fl at batteries inserted, as liquid may leak and damage the remote control
The Universal 5 web remote control is a universal remote, so its memory contains data relating to numerous
devices of various brands available on the market.
Each original device has a specifi c code which must be used to set up the remote control.
Therefore, to use your Universal 5 web you must enter the specifi c code for each device you wish to control.
So use one of the following methods to identify the correct code and set it in your remote control:
A) - INTERNET (recommended)
B) - CELL PHONE (SMS)
C) - MANUAL SEARCH
SETTING CODES
If you have an Internet connection available, follow the on-line guide on the www.meliconi.com/guide website
to identify the specifi c codes for the devices you wish to command. Then set the codes manually in your
MELICONI remote control as described in the ENTERING THE CODE DIRECTLY procedure.
SETTING CODES USING INTERNET
Today, Meliconi gives customers who don’t have internet the chance to receive the codes for programming their
remote control directly on their cell phone.
Simply send an SMS to this number 0039 345 7518893 as follows: 5A, Type, Brand, Model
- Type = indicate the device to be controlled using one of the following abbreviations: TV - SAT - DVD - VCR - TER
(Digital Terrestrial decoder) - AUX (other audio video device).
- Brand, Model = to indicate the brand and the model of the device to be controlled.
Example: 5A, TV, PHILIPS, 32PFL3614 (if you don’t know the model, don’t write anything after the brand).
Once you have received the SMS with the list of codes, set the fi rst code in the remote control as described in
the ENTERING THE CODE DIRECTLY section.
Stand in front of the device with the MELICONI remote control. Turn the device on and then press the OFF button
on the remote (or the PLAY button if the device is a VCR/DVD).
If the device does NOT switch off (or if the VCR/DVD does not start playing), try setting the consecutive code
in the SMS list in the remote control.
When the device reacts check whether the other buttons are operating correctly too.
If they do, the remote control is ready to use.
If they don’t, you are probably using an incorrect code destined for a very similar device; at this point
ignore the SMS list and consult the SETTING CODES USING A MANUAL CODE section to fi nd a more suitable
code.
SETTING CODES USING A CELL PHONE
NOTE: If you don’t receive an SMS on your cell phone or if the message says ERROR / NO CODE, it
means the system has not been able to process the data you have sent; Do not try sending another
SMS use the MANUAL SEARCH instead.
10
SETTING CODES USING A MANUAL SEARCH
(only to be performed if the specifi c code could not be found)
CHECK
Check that the other buttons correspond to the functions of the original remote control; if not, it is likely
that the code found is incorrect, but is used for a very similar device. In that case, repeat the procedure
from point 2.
If the manual search for the code is successful, obtain the code in use by following the DISPLAY CODE IN
USE procedure and make a note of it inside the battery cover.
NOTE: During the search the indicator stops fl ashing and the remote control exits the programming mode
in the following cases:
• if for 12 seconds the button indicated is not pressed or if another button is pressed
• if the list of codes to fi nd is terminated. If this happens, go to the www.meliconi.com website
1. Switch on the device to be programmed:
- if it is a TV, SAT or TER select a programme
- if it is a DVD insert a DVD.
- if it is a VCR insert a cassette.
2. Press and hold down for 6 seconds the device selection
button corresponding to the device you wish to enter
the code for. Note: Use the PVR button if the device is a
VCR.
3. Release the button. The indicator light will fl ash. Point
the remote control at the device and press the ON/OFF
key (or PLAY if it is a VCR/DVD). If the device does NOT
switch off (or if the VCR/DVD does not start playing)
press the same button again slowly (it may be necssary
to press the button several times).
4. When the device responds correctly, press OK. Three
long fl ashes indicate that the operation has been carried
out correctly.
6 SEC.
or or or or
or
ENTERING THE CODE DIRECTLY
(only to be performed if you know the specifi c code to be set)
1. Press and hold down for 6 seconds the device selection
button corresponding to the device you wish to enter
the code for. Note: Use the PVR button if the device is a
VCR.
2. Release the button. The indicator light fl ashes.
Immediately enter the specifi c code previously found.
(e.g.. 1306).
3. Three long fl ashes indicate a correct setting.
If they do not appear, repeat the procedure. If this still does not work it means the code indicated
is not in the remote control, so it must be loaded using the INTERNET as described in the following
section.
6 SEC.
or or or or
Specyfikacje produktu
Marka: | Meliconi |
Kategoria: | Afstandsbediening |
Model: | Gumbody universal 5 web |
Kolor produktu: | Czarny |
Wysokość produktu: | 427 mm |
Szerokość produktu: | 193 mm |
Głębokość produktu: | 495 mm |
Waga produktu: | 4600 g |
Układ: | Midi Tower |
Liczba portów USB 2.0: | 2 |
Model: | PC |
Zasilanie: | 460 W |
Wejście audio: | Tak |
Obsługiwany typ płyty głównej: | ATX,Micro ATX |
Wyjście audio: | Tak |
Obsługiwana średnica wentylatorów przednich: | 120,140 mm |
Maksymalna ilość wentylatorów przednich: | 1 |
Maksymalna ilość wentylatorów bocznych: | 2 |
Obsługiwana średnica wentylatorów tylnych: | 80,92,120 mm |
Maksymalna ilość wentylatorów tylnych: | 1 |
Obsługiwana średnica wentylatorów bocznych: | 120,140 mm |
Maksymalna ilość wentylatorów dolnych: | 1 |
Obsługiwana średnica wentylatorów dolnych: | 80,92,120 mm |
Gniazdo rozszerzeń: | 7 |
Zewnętrzne kieszenie na napęd: | 1 x 3.5", 4 x 5.25" |
Wewnętrzne kieszenie na napęd: | 5 x 3.5" |
Potrzebujesz pomocy?
Jeśli potrzebujesz pomocy z Meliconi Gumbody universal 5 web, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą
Instrukcje Afstandsbediening Meliconi
22 Września 2024
21 Września 2024
21 Września 2024
21 Września 2024
17 Września 2024
9 Sierpnia 2024
9 Sierpnia 2024
9 Sierpnia 2024
Instrukcje Afstandsbediening
- Afstandsbediening Sony
- Afstandsbediening Yamaha
- Afstandsbediening Samsung
- Afstandsbediening AEG
- Afstandsbediening LG
- Afstandsbediening Logitech
- Afstandsbediening Philips
- Afstandsbediening Technics
- Afstandsbediening Bose
- Afstandsbediening Panasonic
- Afstandsbediening Canon
- Afstandsbediening Crestron
- Afstandsbediening Nedis
- Afstandsbediening Medion
- Afstandsbediening Jensen
- Afstandsbediening Ardes
- Afstandsbediening Metra
- Afstandsbediening Grundig
- Afstandsbediening Honeywell
- Afstandsbediening Strong
- Afstandsbediening Tripp Lite
- Afstandsbediening Nikon
- Afstandsbediening HeiTech
- Afstandsbediening Kenwood
- Afstandsbediening DJI
- Afstandsbediening Alpine
- Afstandsbediening Chamberlain
- Afstandsbediening Bang & Olufsen
- Afstandsbediening JVC
- Afstandsbediening Trust
- Afstandsbediening Clarion
- Afstandsbediening Thomson
- Afstandsbediening Tado
- Afstandsbediening Velleman
- Afstandsbediening Homematic IP
- Afstandsbediening DataVideo
- Afstandsbediening One For All
- Afstandsbediening Danfoss
- Afstandsbediening Marantz
- Afstandsbediening Revox
- Afstandsbediening Naim
- Afstandsbediening NAD
- Afstandsbediening Continental Edison
- Afstandsbediening Harman Kardon
- Afstandsbediening Axis
- Afstandsbediening Telefunken
- Afstandsbediening Viper
- Afstandsbediening Amazon
- Afstandsbediening Abus
- Afstandsbediening Hama
- Afstandsbediening Marmitek
- Afstandsbediening Omega
- Afstandsbediening Optex
- Afstandsbediening Reely
- Afstandsbediening Loewe
- Afstandsbediening Technika
- Afstandsbediening Busch-Jaeger
- Afstandsbediening RCA
- Afstandsbediening Vivanco
- Afstandsbediening Gaggenau
- Afstandsbediening PowerBass
- Afstandsbediening Monacor
- Afstandsbediening Aputure
- Afstandsbediening Tascam
- Afstandsbediening EVE
- Afstandsbediening KPN
- Afstandsbediening Ruwido
- Afstandsbediening Brennenstuhl
- Afstandsbediening Targus
- Afstandsbediening Hähnel
- Afstandsbediening KlikaanKlikuit
- Afstandsbediening Steren
- Afstandsbediening Malmbergs
- Afstandsbediening Asustor
- Afstandsbediening Nemef
- Afstandsbediening Hema
- Afstandsbediening Konig
- Afstandsbediening Sweex
- Afstandsbediening Metronic
- Afstandsbediening Hannspree
- Afstandsbediening Provision
- Afstandsbediening Niko
- Afstandsbediening Lifetec
- Afstandsbediening Apart
- Afstandsbediening Genaray
- Afstandsbediening Jolly
- Afstandsbediening Tihao
- Afstandsbediening Zapman
- Afstandsbediening OEM
- Afstandsbediening Emtec
- Afstandsbediening Ranex
- Afstandsbediening Jasco
- Afstandsbediening CME
- Afstandsbediening Engel Axil
- Afstandsbediening Wentronic
- Afstandsbediening EQ3
- Afstandsbediening Fortin
- Afstandsbediening Wet Sounds
- Afstandsbediening ProMaster
- Afstandsbediening Medion MD6461
- Afstandsbediening TCM
- Afstandsbediening Pixel
- Afstandsbediening Sunwave
Najnowsze instrukcje dla Afstandsbediening
23 Września 2024
22 Września 2024
22 Września 2024
21 Września 2024
21 Września 2024
21 Września 2024
21 Września 2024
20 Września 2024
19 Września 2024
19 Września 2024