Instrukcja obsługi Meliconi GumBody Light

Meliconi Zdalne sterowanie GumBody Light

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Meliconi GumBody Light (6 stron) w kategorii Zdalne sterowanie. Ta instrukcja była pomocna dla 3 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/6
USING T HE KEYS AND FUNCT ION S
The functions described below are only available if
they are already foreseen by your TV.
SET- UP
Read these instructions carefully before
programming your remote control!
The F A C I L E L i g h t replacement remote control was designed as a TV control. Thanks to its large
database and numerous functions it is ideal for replacing any lost, defective or broken remote control.
Its ergonomic form and casing in soft rubber make it easy to grip and protect it against falls and bumps.
The large pushbuttons are easy to see and to use. And thanks to the LIGHT button the keys light up so
you can use the remote control even in the dark.
Thank you for choosing a MELICONI remote control.
F A C I L E L i g h t
Keep your Instruction Booklet and Code Booklet for future reference. For anyone with internet,
via the website www.gumbodylight.com, it is even easier and quicker to programme the remote
control and discover all the potential of the FACILE Light thanks to the on-line guide.
Light indicator
TV buttonON/OFF
Teletext keys
Number keys
Confirm button
To select an external input terminal
Control the volume using +/
To select the next ( ) orP+
previous (P-) channel or programme
MUTE key
turns the volume on and off
Fastext functions
or to select submenus
by means of the colours
To move around within the MENU
or to control BRIGHTNESS/COLOUR
Key with additional TV functions To access the MENU
LIGHT button
to light up the keysImpact-proof rubber casing
GB
7
To programme the
remote control,F A C I L E L i g h t
follow the indications in paragraph
A
,
B
or
C
.
1. Switch on the TV.
2. Look for the brand of your TV in the code book and make
a note of the code indicated alongside (
e.g. PHILIPS 0025
)
or the code for the brand indicated by the arrow.
3. Hold down the MUTE ON/OFF and buttons together for
5 seconds until the light indicator at the top starts to flash
indicating that the remote control is being programmed.
4. Release the buttons and enter the brand code previously
identified (
e.g. 0025
) within 12 seconds. The light indicator
flashes more quickly to indicate that the remote control
is ready for the search.
5. Point the remote control at the TV. Press and slowly release
the ON/OFF key several times, stopping when the TV
goes off.
6. When the TV goes off, press the key to confirm. OK Three
flashes indicate that the operation has been completed
correctly.
The quickest and easiest way to programme the remote control
is by consulting the website www.gumbodylight.com.
BRAND SEARCH PROGRAMMING MODE
A
PHILIPS 0025
PHONOLA
PHILIPS
+ + +
FI TT ING T HE B AT T ERIES
Before programming and using
the remote control, fit the batteries.
The remote control requires 2 new
AA/LR06
batteries. Insert the batteries as shown:
• Remember to replace the batteries once a year.
• If the light indicator starts to flash while using the remote
control, replace the batteries. The batteries are low.
• When you remove the batteries, fit the new ones within
5 minutes or you may have to reprogramme your remote
control.
• Make a note of the code for your TV on the adhesive label
inside the battery cover in case you have to reprogramme
your remote control.
+5 SEC.
ADDITIONAL CHECK
Check that some of the other keys, corresponding to those on your original remote control, work correctly.
If the commands function incorrectly or erratically, you have probably entered a code for a similar remote
control but not the right one. In this case, repeat the search procedure starting from
point 3
, entering the
code previously used (e.g. 0025).
8
To display and make a note of the code memorized by means of the search,
follow the instructions described in the paragraph CURRENT CODE DISPLAY.
ADDITIONAL CHECK
Point the remote control at the TV. Check that the TV responds correctly to the commands given. If there
is no response or the TV only responds partially or incorrectly, it is probable that you have used the wrong
code. In this case, repeat the procedure starting from point 3. This time, however, use the
NEXT CODE
in the list (e.g. 1006).
The quickest and easiest way to programme the remote control
is by consulting the website www.gumbodylight.com.
DI RE C T C O D E E N T RY
B
1
. Switch on the TV.
2
. Look for the brand of your TV in the code book and
make a note of the
first code
in the list (e.g. Philips
1000).
3
. Hold down the
MUTE
and
ON/OFF
buttons together for
5 seconds until the light indicator at the top starts to
flash indicating that the remote control is being
programmed.
4
. Release the buttons and enter the 4-digit brand code
previously identified (e.g. 1000) within 12 seconds.
Three flashes
indicate that the code has been
memorized correctly. If not, try the code entry procedure
again, starting from
point 3
.
PHILIPS 0025
TV 1000 1006 1007 1008
1009 1010 1011 1012 1013
1014 1015 1016 1017 1018
Remember to make a note of the TV code used to programme
the remote control on the adhesive label inside the battery cover
for quick and easy reprogramming.
N.B. THE LIGHT INDICATOR STOPS FLASHING
The remote control exits programming mode and the light indicator stops flashing:
if no keys are pressed for 14 seconds
if an invalid code is entered
N.B. THE LIGHT INDICATOR STOPS FLASHING
The remote control exits programming mode and the light indicator stops flashing:
• if no keys are pressed for 14 seconds
if an invalid brand code is entered
if the end of the code search list has been reached. In this case, switch to programming mode C.
+ + +
1 00 0
+5 SEC.
9


Specyfikacje produktu

Marka: Meliconi
Kategoria: Zdalne sterowanie
Model: GumBody Light

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Meliconi GumBody Light, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje Zdalne sterowanie Meliconi

Instrukcje Zdalne sterowanie

Najnowsze instrukcje dla Zdalne sterowanie

Neewer

Neewer RT112 Instrukcja

9 Października 2024
Neewer

Neewer RT113 Instrukcja

9 Października 2024
Zalman

Zalman ZM-VE350 Instrukcja

9 Października 2024
Canon

Canon BG-R20 Instrukcja

9 Października 2024
Canon

Canon BG-R20EP Instrukcja

9 Października 2024
Mosconi

Mosconi DSP6T8 Instrukcja

8 Października 2024
Mosconi

Mosconi RC MINI Instrukcja

8 Października 2024
Ridem

Ridem CRC UNB Instrukcja

8 Października 2024
Ridem

Ridem CRC UNW Instrukcja

8 Października 2024
ORNO

ORNO OR-GB-458 Instrukcja

8 Października 2024