Instrukcja obsługi Meliconi fully 8

Meliconi Zdalne sterowanie fully 8

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Meliconi fully 8 (4 stron) w kategorii Zdalne sterowanie. Ta instrukcja była pomocna dla 4 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/4

Fully 8 RC

Keep this booklet for future reference.

Thank you for choosing a Meliconi remote control.

The FULLY 8 RC universal remote control is ideal for replacing up to 8 remote controls of any brand for TV, Digital Terrestrial

(TER), Satellite (SAT) Decoders, DVD players (including Blu Ray), Videotape recorders (VCR), Personal video recorders

(PVR), cable TV (CAB), other audio video equipment (AUX) or decoders for ADSL TV (ADSL). The remote control has a non-

volatile memory, meaning that it does not lose its settings even if there are no batteries in it.

IMPORTANT: the device must not be exposed to excessive heat sources.

USE OF THE BUTTONS AND FUNCTIONS

The functions of the buttons described below are available only if they are also present on the original remote control.

Volume control +/–

TELETEXT buttons

ON/OFF switches the device OFF and

in some cases ON

Numeric keypad

Conﬁ rm selection

MUTE

turns sound OFF and ON

For selecting an external input

source

For selecting the next programme P+

or the previous programme P–

For moving around within the MENU

Fastext functions or for selecting

sub-menus using colours

Buttons for selecting the device to be

controlled.

DVD/PVR RECORD PAUSE STOP PLAY

buttons

DVD and PVR forward/back functions

Speciﬁ c buttons for decoder

Displays the list of programmes

Selects analogue/digital

Selects digital TV and radio

INSERTING THE BATTERIES

The remote control requires 2 new 1.5V alkaline AAA/LR03 batteries.

Insert them as illustrated.

Try pressing a number button and check that the red light remains lit

continuously until you release the button: if the light ﬂ ashes, the batteri-

es inserted are not charged and are about to go ﬂ at, therefore you must

substitute them.

Do not leave ﬂ at batteries inserted, as liquid may leak and damage the remote control

The Fully 8 RC remote control is a universal remote, so its memory contains data relating to numerous devices of various

brands available on the market.

Each original device has a speciﬁ c code which must be used to set up the remote control.

Therefore, to use your Fully 8 RC you must enter the speciﬁ c code for each device you wish to control.

So use one of the following methods to identify the correct code and set it in your remote control:

A) - INTERNET (recommended)

B) - CELL PHONE (SMS)

C) - MANUAL SEARCH

SETTING CODES

If you have an Internet connection available, follow the on-line guide on the www.meliconi.com/guida website to identify

the speciﬁ c codes for the devices you wish to command. Then set the codes manually in your MELICONI remote control

as described in the ENTERING THE CODE DIRECTLY procedure.

SETTING CODES USING INTERNET

Today, Meliconi gives customers who don’t have internet the chance to receive the codes for programming their remote

control directly on their cell phone.

Simply send an SMS to this number 0039 345 7518893 as follows: 8A, Type, Brand, Model

- Type = indicate the device to be controlled using one of the following abbreviations: TV - SAT - DVD - VCR - TER

(Digital Terrestrial decoder) - AUX (other audio video device).

- Brand, Model = to indicate the brand and the model of the device to be controlled.

Example: 8A, TV, PHILIPS, 32PFL3614 (if you don’t know the model, don’t write anything after the brand).

Once you have received the SMS with the list of codes, set the ﬁ rst code in the remote control as described in the

ENTERING THE CODE DIRECTLY section.

Stand in front of the device with the MELICONI remote control. Turn the device on and then press the OFF button on the

remote (or the PLAY button if the device is a VCR/DVD).

If the device does NOT switch off (or if the VCR/DVD does not start playing), try setting the consecutive code in the SMS

list in the remote control.

When the device reacts check whether the other buttons are operating correctly too.

If they do, the remote control is ready to use.

If they don’t, you are probably using an incorrect code destined for a very similar device; at this point ignore the

SMS list and consult the SETTING CODES USING A MANUAL CODE section to ﬁ nd a more suitable code.

SETTING CODES USING A CELL PHONE

NOTE: If you don’t receive an SMS on your cell phone or if the message says ERROR / NO CODE, it means the

system has not been able to process the data you have sent; Do not try sending another SMS use the MANUAL

SEARCH instead.

(only to be performed if you know the speciﬁ c code to be set)

ENTERING THE CODE DIRECTLY

Three long ﬂ ashes indicate a correct setting. If they do not appear, repeat the procedure.

1. Hold down the selection button corresponding to the device whose code you want to enter (e.g.: ) until the indicator

light starts to ﬂ ash.

2. When the indicator light starts ﬂ ashing, release the button and immediately enter the speciﬁ c code previously found (e.g.:

1306).

1. Switch on the device to be programmed: if TV, SAT, TER select a programme - if DVD insert a DVD, for videotape recorders

insert a cassette

2. Hold down the selection button corresponding to the device whose code you want to ﬁ nd (e.g.: ) until the indicator

light starts to ﬂ ash.

3. Now release the button and brieﬂ y press the button or for a DVD, VCR and PVR.

4. The indicator light ﬂ ashes faster; the remote control is ready for the search.

5. Point the remote control at the device. Slowly press and release the or button several times, stopping when the

device responds correctly to the command sent (you may need to press the button several dozen times).

6. When the device responds correctly, press the button. Three long ﬂ ashes indicate that the operation was completed

correctly.

Check that the other buttons correspond to the functions of the original remote control; if not, it is likely that the code found

is incorrect, but is used for a very similar device. In that case, repeat the procedure from point 2.

If the manual search for the code is successful, obtain the code in use by following the DISPLAY CODE IN USE procedure

and make a note of it inside the battery cover.

NOTE: During the search the indicator stops ﬂ ashing and the remote control exits the programming mode in the fol-

lowing cases:

• if for 12 seconds the button indicated is not pressed or if another button is pressed

• if the list of codes to ﬁ nd is terminated. If this happens, go to the www.meliconi.com website

DISPLAY CODE IN USE

If you set up the remote control using the MANUAL SEARCH procedure, obtain and make a note of the code in use as follows:

1. Hold down the selection button corresponding to the device whose code you want to ﬁ nd (e.g.: ) until the indicator

light starts to ﬂ ash.

2. When the indicator light starts ﬂ ashing, release the button and brieﬂ y press the button.

3. After a pause of several seconds, the indicator light produces four sets of ﬂ ashes, spaced out, corresponding to the code to

be obtained. Count the number of ﬂ ashes. Each set of ﬂ ashes corresponds to one ﬁ gure in the code. Ten ﬂ ashes correspond

to the ﬁ gure 0.

(only to be performed if the speciﬁ c code could not be found)

SETTING CODES USING A MANUAL SEARCH

Specyfikacje produktu

Marka:	Meliconi
Kategoria:	Zdalne sterowanie
Model:	fully 8

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Meliconi fully 8, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą

Twoje imię*

Twój email*

Napisz tutaj swoje pytanie

Instrukcje Zdalne sterowanie Meliconi

Meliconi fully 8 Instrukcja

12 Stycznia 2025

Meliconi Personal 2 plus Instrukcja

30 Września 2024

Meliconi gumbody light facile Instrukcja

23 Września 2024

Meliconi Speedy 2.1 Instrukcja

22 Września 2024

Meliconi GumBody Light Instrukcja

22 Września 2024

Meliconi universal 4 Instrukcja

22 Września 2024

Meliconi Pratico 2.1 Instrukcja

21 Września 2024

Meliconi Gumbody Personal 7 plus Instrukcja

21 Września 2024

Meliconi Gumbody Personal 2 Instrukcja

21 Września 2024

Meliconi Control TV+ Instrukcja

21 Września 2024

Instrukcje Zdalne sterowanie

Najnowsze instrukcje dla Zdalne sterowanie

Sonos Controller voor Mac of pc Instrukcja

14 Stycznia 2025

Sonos Controller for Android Tablets Instrukcja

14 Stycznia 2025

One For All URC 7935 Instrukcja

14 Stycznia 2025

Sonos Controller for iPad Instrukcja

14 Stycznia 2025

SilverCrest KH 2155 Instrukcja

12 Stycznia 2025

Hama Spot-Pointer V2 Instrukcja

11 Stycznia 2025

Interphone Handlebar Control Instrukcja

5 Stycznia 2025

Nexa MYCT-2107 Instrukcja

4 Stycznia 2025

Amewi DDF-350 Instrukcja

3 Stycznia 2025

Pixel Wireless Remote Control Instrukcja

29 Grudnia 2024