Instrukcja obsługi Meliconi Gumbody Senior2

Meliconi Zdalne sterowanie Gumbody Senior2

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Meliconi Gumbody Senior2 (5 stron) w kategorii Zdalne sterowanie. Ta instrukcja była pomocna dla 9 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/5
Keep this booklet for future reference.
Thank you for choosing a Meliconi remote control.
The Gumbody Senior 2 remote control is ideal for simultaneously controlling an analogue TV combined with a
digital decoder (terrestrial, satellite or cable) connected to it.
In this case, thanks to its combined keypad, there is no need to manually select the device to be controlled.
Using SENIOR 2 to control both devices (TV + DECODER), the light blue buttons automatically control the TV,
and the dark blue buttons control the DECODER.
With the appropriate settings the remote control can also control individual devices such as a digital TV, analogue
TV or decoder. In that case, all of the buttons on the keypad control the selected device.
The remote control has a non-volatile memory, meaning that it does not lose its settings even if there are no
batteries in it.
Its ergonomic shape and soft rubber body make it easy to grip and protect the remote control if it is knocked
and dropped.
IMPORTANT: the device must not be exposed to excessive heat sources.
USING THE REMOTE CONTROL
Volume control +/–
Confi rm selection
MUTE
turns sound OFF and ON
TELETEXT buttons
Shockproof rubber body
Fastext functions
or for selecting sub-menus using
colours
Specifi c area for digital,
terrestrial or satellite decoder
Indicator light
ON/OFF
switches the TV OFF and in some
cases ON
Important: sometimes, to
switch on the TV, you need to
simultaneously press the ALT
button and a number button
ON/OFF switches the Decoder
OFF and in some cases ON
Numeric keypad
For selecting an external
input source
For selecting the next programme
P+ or the previous programme P–
If pressed together with any TV
button (light blue), allows access
to the corresponding function on
the Decoder and vice versa (e.g.:
ALT + VOL+ adjusts the decoder
volume) For moving around within
MENUs
The functions of the buttons described below are available only if they are also present on the original
remote control.
SIZE: button for changing the
screen confi guration
2
Senior
The SENIOR 2 remote control is a universal remote, its memory containing data relating to many devices of
different brands available on the market. Each original device has a specifi c code which must be used to set up
the remote control.
Therefore, to use SENIOR 2 you must enter the specifi c code for each device you want to control.
If you have an internet connection, follow the online guide on the www.meliconi.com/guida website to fi nd
the specifi c codes for the devices you want to control; then set the codes in the SENIOR 2 remote control as
described in the ENTERING THE CODE DIRECTLY procedure.
FINDING THE CODE
INSERTING THE BATTERIES
If you are unable to fi nd a specifi c code, consult the section on MANUAL CODE SEARCH.
If you want to use the SENIOR 2 to simultaneously control two different devices (TV + DECODER) follow
procedure A then procedure B.
To control a single device (DECODER), follow only procedure B.
To control a single device (DIGITAL/ANALOGUE TV), follow procedure C.
If the manual search for the code is successful, obtain the code in use by following the DISPLAY CODE IN USE
procedure and make a note of it inside the battery cover.
(only to be performed if the specifi c code could not be found)
MANUAL CODE SEARCH
To go to the programming mode, according to requirements, use one of the following pairs of buttons:
VOL
+
and VOL - to set the code for the TV part only - (light blue buttons)
P
+
and P - to set the code for the DECODER part only - (dark blue buttons)
VOL
+
and P
+
to set a single code and control only one device - (whole keypad)
ENTERING THE CODE DIRECTLY
Three long fl ashes indicate a correct setting. If they do not appear, repeat the procedure.
1. Switch to the programming mode by simultaneously holding
down the appropriate pair of buttons.
2. When the indicator light starts fl ashing, release the buttons
and immediately enter the specifi c code previously found.
(e.g.: 1306)
Example of TV code
The remote control requires 2 new 1.5V alkaline AAA/
LR03 batteries.
Insert them as illustrated.
Try pressing a number button and check that the red
light remains lit continuously until you release the
button: if the light fl ashes, the batteries inserted are not
charged and are about to go fl at, therefore you must
substitute them.
Check that the other buttons (light blue) correspond to the functions of the original remote control; if not, it is likely
that the code found is incorrect, but is used for a very similar device, therefore repeat the procedure from point 2
1. Switch on the device and select a programme.
2. Simultaneously hold down the P+ and P- buttons.
3. When the indicator light starts fl ashing, release the buttons
and briefl y press the STB ON/OFF button.
4. The indicator light fl ashes faster; the remote control is ready
for the search.
5. Point the remote control at the device. Slowly press and
release the STB ON/OFF button several times, stopping
when the decoder is switched off (you may need to press the
button several dozen times).
6. When the device has switched off press the OK button.
Three long fl ashes indicate that the operation was completed
correctly.
STB
STB
1. Switch on the TV and select a programme
2. Simultaneously hold down the VOL + and VOL - buttons.
3. When the indicator light starts fl ashing, release the buttons
and briefl y press the TV ON/OFF button.
4. The indicator light fl ashes faster; the remote control is ready
for the search.
5. Point the remote control at the TV. Slowly press and release
the TV ON/OFF button several times, stopping when the TV
is switched off (you may need to press the button several
dozen times).
6. When the device has switched off press the OK button.
Three long fl ashes indicate that the operation was completed
correctly.
TV
TV
A. MANUAL SEARCH (TV)
B. MANUAL SEARCH (DECODER)
Check that the other buttons (dark blue) correspond to the functions of the original remote control; if not, it is likely
that the code found is incorrect, but is used for a very similar device, therefore repeat the procedure from point 2.
P

Specyfikacje produktu

Marka: Meliconi
Kategoria: Zdalne sterowanie
Model: Gumbody Senior2

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Meliconi Gumbody Senior2, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje Zdalne sterowanie Meliconi

Meliconi

Meliconi Gumbody Senior2 Instrukcja

4 Lutego 2025
Meliconi

Meliconi Gumbody DIGITAL 2 SMART Instrukcja

3 Lutego 2025
Meliconi

Meliconi Mycro Instrukcja

1 Lutego 2025
Meliconi

Meliconi fully 8 Instrukcja

12 Stycznia 2025
Meliconi

Meliconi Personal 2 plus Instrukcja

30 Września 2024
Meliconi

Meliconi gumbody light facile Instrukcja

23 Września 2024
Meliconi

Meliconi Speedy 2.1 Instrukcja

22 Września 2024
Meliconi

Meliconi GumBody Light Instrukcja

22 Września 2024
Meliconi

Meliconi universal 4 Instrukcja

22 Września 2024
Meliconi

Meliconi Pratico 2.1 Instrukcja

21 Września 2024

Instrukcje Zdalne sterowanie

Najnowsze instrukcje dla Zdalne sterowanie

Magnum

Magnum RC-328 Instrukcja

9 Kwietnia 2025
Medion

Medion MD 41169 Instrukcja

6 Kwietnia 2025
Panasonic

Panasonic EUR7722KB0 Instrukcja

6 Kwietnia 2025
Sonos

Sonos Controller for iPhone Instrukcja

4 Kwietnia 2025
Conrad

Conrad src 9200 Instrukcja

2 Kwietnia 2025
Hama

Hama 20312 - Easytip S9 Instrukcja

1 Kwietnia 2025
Hama

Hama 40095 - 5in1 Instrukcja

1 Kwietnia 2025
ELV

ELV SRC-7000 Instrukcja

31 Marca 2025
Hama

Hama 20320 - Zapman 4in1 Instrukcja

31 Marca 2025
Universal Remote Control

Universal Remote Control UR4U Instrukcja

30 Marca 2025