Instrukcja obsługi Meliconi Gumbody FACILE 100

Meliconi Zdalne sterowanie Gumbody FACILE 100

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Meliconi Gumbody FACILE 100 (5 stron) w kategorii Zdalne sterowanie. Ta instrukcja była pomocna dla 7 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/5
USING THE KEYS AND FUNCTIONS
The functions described below are only available
if they are already foreseen by your TV.
PREPARE FOR USE
Read these instructions carefully
before programming your remote control!
The FACILE 100 replacement remote control was designed as a TV control. Thanks to its large database
and numerous functions it is ideal for replacing any lost, defective or broken remote control.
Its ergonomic form and casing in soft rubber make it easy to grip and protect it against falls and bumps.
The large keys are easy to see and to use.
Thank you for choosing a MELICONI remote control.
FACILE 100
Keep this booklet in case you ever need to consult us in the future.
For anyone with internet, via the website www.meliconi.com/guide,
it is even easier and quicker to programme the remote control
and discover all the potential of the FACILE 100 thanks to the on-line guide.
Light indicator TV ON/OFF key
Teletext keys
Number keys
Confirm key
To select an external input terminal
Control the volume using +/–
To select the next (P+) or
previous (P-) channel or programme
MUTE
turns the volume on and off
Fastext functions or to select
submenus by means of the colours
To move around within
the MENU or to control
the BRIGHTNESS/COLOUR
Key with additional TV functions
To access the MENU
Impact-proof rubber casing
GB
1
1. Switch on the TV.
2. Look for the brand of your TV in the Code Book and make
a note of the corresponding code indicated alongside (
e.g.
Philips 0025
).
3. Hold down the MUTE and ON/OFF keys together for 5
seconds until the light indicator starts to flash indicating
that the remote control is being programmed.
4. Release the keys and within 12 seconds enter the make
code previously identified (
e.g. 0025
). The light indicator
flashes more quickly to indicate that the remote control
is ready for the search.
5. Point the remote control at the TV. Press and slowly release
the ON/OFF key several times, stopping when the TV
goes off.
6.
When the TV goes off, press the OK key to confirm
.
Three flashes indicate that the operation has been
completed correctly.
The quickest and easiest way to programme the remote control is
by consulting the website www.meliconi.com/guide.
HOW TO PROGRAMME THE REMOTE CONTROL
PHILIPS 0025
FITTING THE BATTERIES
Before programming and using the remote control,
fit the batteries.
The remote control requires 2 new AAA/LR03 batteries. Insert the batteries as shown:
• Change the batteries if the light indicator starts to flash
during use. The batteries are low.
• When you remove the batteries, fit the new ones within
5 minutes or you may have to reprogramme your remote
control.
• Make a note of the code for your TV on the adhesive label
inside the battery cover in case you have to reprogramme
your remote control.
To display and make a note of the code memorized by means of the search,
follow the instructions described in the paragraph CURRENT CODE DISPLAY.
ADDITIONAL CHECK
Check that some of the other functions used on your original remote control are working correctly. If the
commands function incorrectly or erratically, you have probably entered a code for a similar remote control
but not the right one. In this case, repeat the search procedure starting from point 3, entering the code
previously used (e.g. 0025).
2
+5 SEC.
+++
N.B. THE LIGHT INDICATOR STOPS FLASHING.
The remote control exits programming mode and the light indicator stops flashing:
• if no keys are pressed for 14 seconds
• if an invalid brand code is entered
• if the end of the code search list has been reached. In this case, consult our website www.meliconi.com/guide
3
GLOBAL SEARCH REMOTE CONTROL PROGRAMMING
This operation can take up to 20 minutes and should be carried out if you have not succeeded in programming
the remote control by means of the method described above.
The quickest and easiest way to programme the remote control is
by consulting the website www.meliconi.com/guide.
To display and make a note of the code memorized by means of the search,
follow the instructions described in the paragraph CURRENT CODE DISPLAY.
1. Switch on the TV.
2. Hold down the MUTE and ON/OFF keys together for 5
seconds until the light indicator starts to flash indicating
that the remote control is being programmed.
3. Release the keys and enter the code 0000 within 12
seconds. The light indicator flashes more quickly to indicate
that the remote control is ready for the search.
4. Point the remote control at the TV. Press and slowly release
the ON/OFF key several times, stopping when the TV
goes off.
5.
When the TV goes off, press the OK key to confirm
.
Three flashes indicate that the operation has been
completed correctly.
ADDITIONAL CHECK
Check that some of the other functions used on your original remote control are working correctly. If the
commands function incorrectly or erratically, you have probably entered a code for a similar remote control
but not the right one. In this case, repeat the search procedure starting from point 2.
N.B. THE LIGHT INDICATOR STOPS FLASHING.
The remote control exits programming mode and the light indicator stops flashing:
• if no keys are pressed for 14 seconds
• if the end of the code search list has been reached. In this case, consult our website www.meliconi.com/guide
+5 SEC.
+++

Specyfikacje produktu

Marka: Meliconi
Kategoria: Zdalne sterowanie
Model: Gumbody FACILE 100

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Meliconi Gumbody FACILE 100, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje Zdalne sterowanie Meliconi

Meliconi

Meliconi fully 8 Instrukcja

12 Stycznia 2025
Meliconi

Meliconi Personal 2 plus Instrukcja

30 Września 2024
Meliconi

Meliconi gumbody light facile Instrukcja

23 Września 2024
Meliconi

Meliconi Speedy 2.1 Instrukcja

22 Września 2024
Meliconi

Meliconi GumBody Light Instrukcja

22 Września 2024
Meliconi

Meliconi universal 4 Instrukcja

22 Września 2024
Meliconi

Meliconi Pratico 2.1 Instrukcja

21 Września 2024
Meliconi

Meliconi Gumbody Personal 7 plus Instrukcja

21 Września 2024
Meliconi

Meliconi Gumbody Personal 2 Instrukcja

21 Września 2024
Meliconi

Meliconi Control TV+ Instrukcja

21 Września 2024

Instrukcje Zdalne sterowanie

Najnowsze instrukcje dla Zdalne sterowanie

Canal Digitaal

Canal Digitaal Amino Instrukcja

22 Marca 2025
Ikea

Ikea RODRET 405.597.98 Instrukcja

13 Marca 2025
Canal Digitaal

Canal Digitaal MP-201 Instrukcja

11 Marca 2025
Philips

Philips SRU3004WM Instrukcja

10 Marca 2025
Philips

Philips SRU4105WM Instrukcja

10 Marca 2025
RADEMACHER

RADEMACHER DuoFern Wandtaster 9494 Instrukcja

10 Marca 2025
Conrad

Conrad cv 450 Instrukcja

9 Marca 2025
Zalman

Zalman Z-SYNC Instrukcja

26 Lutego 2025
AXIL

AXIL MD 0283 E Instrukcja

19 Lutego 2025
Savio

Savio RC-19 Instrukcja

7 Lutego 2025