Instrukcja obsługi Meliconi Digital 2 smart

Meliconi Zdalne sterowanie Digital 2 smart

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Meliconi Digital 2 smart (5 stron) w kategorii Zdalne sterowanie. Ta instrukcja była pomocna dla 4 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/5
GB
16
U S I N G T H E K E Y S AN D F U N C T I O N S
The functions described below are only available
if they are already foreseen by your TV.
Keep this booklet in case you ever need to consult us in the future.
Thanks to the enclosed CD and to the on-line guide on the site www.meliconi.com/guide it is
even easier and faster to programme the remote control and discover all the potential offered
by the DIGITAL 2 SMART.
S E T - U P
Read these instructions carefully before programming your remote control!
Thanks to its large database and numerous functions the remote control is ideal forDIGITAL 2 SMART
replacing up to 2 remote controls of any brands for (digital terrestrial or satellite decoder).TV - STB
Its ergonomic form and casing in soft rubber make it easy to grip and protect it against falls and bumps.
Thank you for choosing a MELICONI remote control.
DIGITAL 2 SMART
Keys for selecting which appliance
you want to use
ON/OFF key for the appliance
Number keys To select an external input terminal
To select the next ( ) or previousP+
(P-) channel or program
Control the volume using +/ -
Specific area for digital terrestrial
or satellite decoder
To access the MENU
Teletext keys
Confirm key
To move around within the MENU
or to control the
BRIGHTNESS/COLOUR
Fastext functions or to select
submenus by means of the
colours
Impact-proof rubber casing
Light indicator
17
PROGRAMMING USING THE BRAND CODE
F I T T I N G T H E B A T T E R I E S
Before programming and using the remote control,
fit the batteries.
To display and make a note of the code memorized by means of the search,
follow the instructions described in the paragraph CURRENT CODE DISPLAY.
ADDITIONAL CHECK
Check that some of the other functions used on your original remote control are working correctly. If the
commands function incorrectly or erratically, you have probably entered a code for a similar remote control
but not the right one. In this case, repeat the search procedure starting from , entering the codepoint 3
previously used (e.g. 0025).
The keys can be programmed according to your requirements, following the procedure describedTV - STB
below.
The quickest and easiest way to programme the remote control is
by consulting the website www.meliconi.com/guide.
Warning: programme one appliance at a time!
• Change the batteries if the light indicator starts to flash
during use. The batteries are low.
• Make a note of the codes for your appliances on the
adhesive label inside the battery cover in case you have
to reprogramme your remote control.
• This remote control has a permanent memory and does
not lose the programmed codes or functions when the
batteries are removed.
The remote control requires 2 new batteries. Insert the batteries as shown:AAA/LR03
1. Switch ON the appliance you wish to program and select
a program.
2. Search for the brand of your appliance in the list of brands
at the end of this booklet. Record the code indicated
alongside (
e.g. PHILIPS 0025
). Warning: if the brand is
not shown in the list then programming can be per-
formed using the code 0099.
3. Hold down the selection key for the appliance to be
programmed for 5 seconds.
4. When the key is released, it will start to flash. Enter the
brand code previously identified within 15 seconds (
e.g.
0025
).The selection key flashes more quickly to indicate
that the remote control is ready for the search.
5. Point the remote control towards the appliance. Press
and slowly release the key several times, ON/OFF stopping
when the appliance responds correctly to the command.
6. When the appliance responds correctly, press the keyOK
to confirm. indicate that the search operationThree flashes
has been completed correctly.
PHILIPS 0025
5 SEC.
or
N.B. THE LIGHT INDICATOR STOPS FLASHING
The remote control exits programming mode and the light indicator stops flashing:
• if no keys are pressed for 14 seconds
• if an invalid brand code is entered
• if a key other than is accidentally pressedON/OFF
• if the end of the code search list has been reached. In this case, consult the website
www.meliconi.com/guide
PROGRAMMING USING GLOBAL SEARCH
The quickest and easiest way to programme the remote control is
by consulting the website www.meliconi.com/guide.
Warning: programme one appliance at a time!
ADDITIONAL CHECK
Check that some of the other functions used on your original remote control are working correctly. If the
commands function incorrectly or erratically, you have probably entered a code for a similar remote control
but not the right one. In questo caso ripetete la procedura di ricerca partendo dal punto 2.In this case,
repeat the search procedure starting from .point 2
To display and make a note of the code memorized by means of the search,
follow the instructions described in the paragraph CURRENT CODE DISPLAY.
N.B. THE LIGHT INDICATOR STOPS FLASHING
The remote control exits programming mode and the light indicator stops flashing:
• if no keys are pressed for 14 seconds
• f a key other than is accidentally pressedON/OFF
• if the end of the code search list has been reached. In this case, consult the website
www.meliconi.com/guide
18
This operation can take up to 20 minutes and should be carried out if you have not succeeded in programming
the remote control by means of the method described above.
1. Switch ON the appliance you wish to program and select
a program.
2. Hold down the selection key for the appliance to be
programmed for 5 seconds.
3. When the key is released, it will start to flash. Enter the
code 0000 within 15 seconds; the selection key flashes
more quickly to indicate that the remote control is ready
for the search.
4. Point the remote control towards the appliance. Press
and slowly release the key several times, ON/OFF stopping
when the appliance responds correctly to the command.
5. When the appliance responds correctly, press the keyOK
to confirm. indicate that the search operationThree flashes
has been completed correctly.
5 SEC.
or

Specyfikacje produktu

Marka: Meliconi
Kategoria: Zdalne sterowanie
Model: Digital 2 smart

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Meliconi Digital 2 smart, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje Zdalne sterowanie Meliconi

Meliconi

Meliconi Personal 2 plus Instrukcja

30 Września 2024
Meliconi

Meliconi gumbody light facile Instrukcja

23 Września 2024
Meliconi

Meliconi Speedy 2.1 Instrukcja

22 Września 2024
Meliconi

Meliconi GumBody Light Instrukcja

22 Września 2024
Meliconi

Meliconi universal 4 Instrukcja

22 Września 2024
Meliconi

Meliconi Pratico 2.1 Instrukcja

21 Września 2024
Meliconi

Meliconi Gumbody Personal 7 plus Instrukcja

21 Września 2024
Meliconi

Meliconi Gumbody Personal 2 Instrukcja

21 Września 2024
Meliconi

Meliconi Control TV+ Instrukcja

21 Września 2024
Meliconi

Meliconi Gumbody Personal 6 plus Instrukcja

21 Września 2024

Instrukcje Zdalne sterowanie

Najnowsze instrukcje dla Zdalne sterowanie

Neewer

Neewer RT112 Instrukcja

9 Października 2024
Neewer

Neewer RT113 Instrukcja

9 Października 2024
Zalman

Zalman ZM-VE350 Instrukcja

9 Października 2024
Canon

Canon BG-R20 Instrukcja

9 Października 2024
Canon

Canon BG-R20EP Instrukcja

9 Października 2024
Mosconi

Mosconi DSP6T8 Instrukcja

8 Października 2024
Mosconi

Mosconi RC MINI Instrukcja

8 Października 2024
Ridem

Ridem CRC UNB Instrukcja

8 Października 2024
Ridem

Ridem CRC UNW Instrukcja

8 Października 2024
ORNO

ORNO OR-GB-458 Instrukcja

8 Października 2024