Instrukcja obsługi Media-Tech MT4212

Media-Tech Punkt dostępu MT4212

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Media-Tech MT4212 (1 stron) w kategorii Punkt dostępu. Ta instrukcja była pomocna dla 8 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/1
MT4212
Wireless-N Wifi Repeater
04
Wireless-N Wifi Repeater
03
Wireless-N Wifi Repeater
02
You can configure the Wi-Fi Repeater by connecting it with your
computer/laptop with enclosed RJ45 cable or wirelessly. We recommend you to
do it with wire.
A2. Click the “ ” button (it Start
should be located at the lower-left
corner of your screen), then click
“ ”. Click “Control Panel View Network
Status and Tasks”, and then click
“ ”. Manage Network Connections
Right-click “Local Area Network”,
then select “Properties”. When the
“ ” Local Area Connection Properties
window appears, select “Internet
Protocol Version 4 (TCP/IPv4)” and
then click “Properties”.
A1. Plug the Wi-Fi Repeater to a
wall socket. Connect your computer
/ laptop with the Wi-Fi Repeater with
enclosed RJ45 Cable.
A3. Setting IP address manually:
Type IP address is 192.168.10.x (x
is from 2 to 254), and Subnet mask
is 255.255.255.0. Type the Router’s
LAN IP address (the default IP is
192.168.10.1) into the Default
gateway field.
How to configure the Wi-Fi Repeater
A. Configure the Wi-Fi Repeater with RJ45 Cable
For a typical wireless setup at home (as shown below), please do the
following:
You will need WiFi
AP/Router Internet access
You will need broadband
Router Internet access
Connect the WiFi-Repeater
to your Router/Switch with
RJ-45 Cable
Setting up a Wireless Infrastructure Network
Wireless Repeater Mode
Getting Started
Wireless AP Mode
Wireless-N Wifi Repeater
01
The WiFi Repeater is a combined wired/wireless network connection device
designed specifically for small business, office, and home office networking
requirements. It allows a wireless network to be expanded using multiple access
points without the need for a wired backbone to link them. It also works well with
other 11b/g and 11n protocol wireless products.
NOTE: reset If you need to the Wi-Fi Repeater, you need press and hold the
reset button inside the tiny hole for seconds.10
Before you starting to use this router, please check if there's anything missing in
the package, and contact your dealer of purchase to claim for missing items:
·1 x Wireless-N Repeater
·1 x RJ-45 Networking Cable
·1 x Quick installation Guide
Introduction:
Package Contents
A7. Click on ‘ ’ buttonRepeater – OneKey Setting
A8. Wait a few seconds and you will see the site below and please click on
‘ ’ button.Wireless Network Selection
Wireless-N Wifi Repeater
05 Wireless-N Wifi Repeater
06
A11. Click ‘ ’ to confirm. The OK
Repeater will restart.
Wireless-N Wifi Repeater
07
WLAN
REPEATER
A12. Wait a few seconds and you will see the status site like below. It means
your Wi-Fi Repeater is ready for use.
Wi-Fi Repeater1The WLAN key is same with your router.
If you do not see the site like above, you need to re-configure it again.
NOTE reset: If you need to the Wi-Fi Repeater, you need press the reset button
inside the tiny hole for seconds. 10
A9. Click on ‘ ’ button. Refresh List
Select the Wireless SSID and click ‘ ’ to continue.Next
A10.When you see the site below, please do not change any setting but only
insert the password of your network.
Click on ‘ ’ button.Apply and Reboot
A4. Open web browser and type
http://192.168.10.1 in the browser's
address box. This number is the
default IP address for this device.
A5. The login screen below will
appear. Enter the “User Name” and
“Password” and click “ ” to login. OK
The default User name is “ ” admin
and the Password is “ ”.admin
A6. After logging in and click
“Setup Wizard”, you will see
the web page below:
Select “Wireless Repeater Mode
(Station)” ‘Next’ and click on to continue.
Quick Installation Guide (Q.IG)

Specyfikacje produktu

Marka: Media-Tech
Kategoria: Punkt dostępu
Model: MT4212

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Media-Tech MT4212, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje Punkt dostępu Media-Tech

Media-Tech

Media-Tech MT4212 Instrukcja

29 Września 2024

Instrukcje Punkt dostępu

Najnowsze instrukcje dla Punkt dostępu

Cisco

Cisco Aironet 3600i Instrukcja

15 Stycznia 2025
Luxul

Luxul P40 Instrukcja

14 Stycznia 2025
Luxul

Luxul XAP-1440 Instrukcja

14 Stycznia 2025
Ubiquiti Networks

Ubiquiti Networks UniFi AP Flex HD Instrukcja

12 Stycznia 2025
Mikrotik

Mikrotik LTAP Mini LTE kit Instrukcja

30 Grudnia 2025
TP-Link

TP-Link Omada EAP115-Wall Instrukcja

30 Grudnia 2025
D-Link

D-Link AirXpert DWL-7000AP Instrukcja

23 Grudnia 2024
EQ-3

EQ-3 HMIP-HAP Instrukcja

15 Grudnia 2024
Vimar

Vimar 20195.N Instrukcja

15 Grudnia 2024
Vimar

Vimar 19195.M Instrukcja

15 Grudnia 2024